# assetType (asset type)
An asset type says what a kind of asset is: the files an asset of the kind is
made of, the code that gives it behaviour, the interface a person uses to work
with it, and how it is found, pictured and checked. A `<typename>.assetType/`
folder declares a type called `<typename>`, and every `<name>.<typename>/`
folder is an asset of it. `assetType` is itself a type, so a type is an asset
like any other: it is created, versioned, installed and contributed the same way.
## Making a type
`asset.create("assetType", "<typename>")` scaffolds a type. The type registers
the moment its folder is written, anywhere under `/zero/source/`, and from then
on `<name>.<typename>/` folders are its assets. An asset of a type that is not
registered yet is not an asset, so make the type first.
A type folder is a root: `~.x` in any file inside it names the type's own `x`,
wherever the type is installed. Keep the type's whole implementation inside its
folder and reach it that way.
What a type folder must hold is set by this type's own `type.yaml`, the same way
every type's `type.yaml` sets what its assets hold. `asset.validate` on a type
reports anything missing, and the scaffold produces a folder that passes.
## What sets your type's schema (`type.yaml`)
`type.yaml` is the structural contract every asset of the type is checked
against. The keys below are the ones the engine reads; a key not listed here is
ignored.
| Key | What it controls |
|---|---|
| `suffix` | The folder suffix of the type's assets. Defaults to `.<typename>`. |
| `primary` | The file or files that are the asset's content: what the asset resolves to when it is used. |
| `entry_files`, `primary_aliases` | Further files that load as the asset or share its identity. |
| `is_container` | Whether the suffix stays in the identities of what the asset holds. |
| `is_opaque_walker` | Whether a walk of the tree stops at the asset and registers only its primary. |
| `plural_dir`, `classify_exts` | Loose files in a folder of this name, or with these extensions, are assets of the type. |
| `is_text_default` | Whether the asset's files are text unless stated otherwise. |
| `broadcasts_subassets` | Whether assets nested inside an asset of the type are found by their own short name. |
| `root` | `true` makes every asset of the type a root, so `~.x` inside one names that asset's own `x`. |
| `contract_ref: { field, category }` | A key of the primary file that names another asset the asset is built on. |
| `files: { required, optional }` | The files an asset holds (below). |
| `allow_unlisted` | `false` reports every file the type does not declare. |
| `aliases_from: [{ file, key }]` | Further names an asset answers to, read from its own files. |
| `settings:` | Typed per-asset settings (below). |
| `inspector:` | The interface people use for the type and its assets (below). |
| `preview:` | How an asset is pictured (below). |
| `references:` | Names of other assets the type's files carry (below). |
| `indexing:` | What search reads for each asset (below). |
| `describe:` | How a missing description is generated (below). |
### The files an asset holds
Each entry under `files.required` or `files.optional` is
`{ path, kind: file | folder, one_of_group?, content? }`. `*` in a path matches
within one segment. Entries that share a `one_of_group` are satisfied by any one
of them. `content` lists checks on the file's bytes:
| Check | Passes when |
|---|---|
| `non_empty` | the file has content |
| `json_field { key, type?, non_empty?, accept? }` | the JSON holds the key (a dotted path) with that shape |
| `yaml_field { key, type?, non_empty?, accept? }` | the same for YAML |
| `described { keys?, headings?, message? }` | the file says what the asset is (see "Ask your assets to say what they are") |
Each check takes a `message`, which is what the author is told when it fails.
### Settings
`settings: { values, schema: { type | instance, export? } }` gives every asset
typed settings. `values` names the file an asset's values live in; `schema.type`
declares one schema for the whole type, and `schema.instance` names a file each
asset declares its own in. `asset.create` writes the resolved values, and a write
to the values file reaches `onChange` with what changed.
## The human side (`inspector.luau`)
A type is used by people through its Inspector, and without one the type is
usable only from code. The Inspector is the type's interface for a person: for a
procedural graph it is the graph editor, for a kit it is the tracking view of
what the kit holds and what is still missing. Writing it is part of writing the
type.
`inspector: { type, instance? }` in `type.yaml` names the files. `type` is the
interface for the type itself and for its assets; `instance` names a file an
asset may ship to add its own. Each returns:
```luau
return {
sections = { { id = "graph", title = "Graph", build = function(ctx) ... end } },
replace = { contents = { ... } }, -- replace a default section by id
order = { "graph", "contents" }, -- section order
}
```
`build(ctx)` receives the asset and builds the section. A section's `title`, and
the text its rows carry, is a string or an `i18n.text` value read from a catalog
(`i18n.text("inspectors.mesh.title")`), which follows the editor's language. `asset.create("assetType",
...)` scaffolds a working `inspector.luau` to start from. `asset.validate` on a
type that names no inspector, or names one that does not load, reports it.
## Say what your type is for (`about.yaml`)
Every type carries an `about.yaml` that says what the type is for, in three
plain-language texts:
```yaml
intent: "Sets the typeface of the text in your game: UI, labels, signs and 3D lettering."
function: "A font, from a TTF, OTF or WOFF file, made available to all of Zero's text, including 3D text."
usage: "You choose it by name for your UI or your text, and the text appears in that typeface."
```
- **`intent`** is what the type is for in someone's game, in the words a game maker uses. Up to 800 bytes.
- **`function`** is how it works today: what an asset of it is made of and what the engine does with it. Up to 1500 bytes.
- **`usage`** is what a person or an agent does with one. Up to 1200 bytes.
Write about the type as a whole, not one asset of it, and say what it does now.
Agents read these texts to learn when to reach for the type and how; people
searching find the type by them. The scaffold starts each text with
`[[describe]]` and a note on what to write; a text that still starts that way
counts as not written. `services describe` can write them.
They show up in `asset.inspect` as `detail.about`, in
`assetTypeRef:getAbout()`, at the end of the type's `types/<typename>` guide,
and at the top of the type's Inspector.
## Ask your assets to say what they are
A type can require each asset to carry a description: a file, written by the
author or generated, saying what the asset is and what it is for. Declare it with
a `described` check:
```yaml
files:
required:
- path: "README.md"
kind: "file"
content:
- { check: "described", message: "Say what this widget is for and where it goes." }
```
A file that is missing, empty or still has a line starting with `[[describe]]`
fails the check, and so does a YAML file whose named `keys` are missing or over
their `max_bytes`, or a Markdown file missing a named heading. `asset.validate`
names the asset, and a push that carries it is refused with `message`.
`services describe` finds such assets and writes their descriptions.
`describe:` steers what is generated:
```yaml
describe:
guidance: "Say what the widget shows, what input it reacts to, and where it fits in a UI."
examples:
- "<identity of an asset of this type whose description reads well>"
```
An example is an asset of your type whose description is a true, written one,
never a placeholder and never the asset being described; with none, leave
`examples` empty. A type whose assets the model cannot perceive (a sound, a
motion) says so in `guidance`, and the description is drawn only from what the
asset's own files state.
Start the file unwritten in your `template/`: a heading and one line starting
with `[[describe]]`, never example content, which every new asset would carry
verbatim. A type whose assets say what they are through their own content (a
mesh, a texture) declares no check.
## The type's code (`behavior.luau`)
`behavior.luau` returns one table. These are the keys the engine reads from it;
anything else on the table is the type's own.
### What the type's assets can do
| Key | Shape | What the engine does with it |
|---|---|---|
| `ref` | `{ [name] = function(self, ...) }` | Every function becomes a method on every asset of the type: `ref:name(...)`. |
| `modules` | `{ [name] = require(".x") }` | Code the type's assets reach with `asset.containing(__FILE__).modules.<name>`. |
| `events` | an events schema | Events an asset fires. Readers subscribe through `ref.events.<name>:connect(...)`; the type fires them. |
| `refShapes` | `{ [method] = function(self) -> (typeExpr, source?) }` | The result type of a `ref` method for one particular asset (below). |
| `namePattern` | a Lua pattern | The names `asset.create` accepts for the type's assets. Default `^[A-Za-z][A-Za-z0-9_]*$`. |
| `derive` | `{ output, module, compute, fingerprint, matches?, required?, timeout? }` | A file computed from the asset when it is committed; a `required` one holds the commit until it lands. |
Some `ref` names mean the same for every type, and the engine calls them:
- **`instantiate(self, target?, opts?) -> (root, idMap)`**: puts the asset in a scene. Defining it is what makes the type scene-instantiable. Its return is a contract (below).
- **`inspect(self) -> detail`**: what `asset.inspect` reports for the asset beyond the common record (below).
- **`preview(self, opts)`**: renders the asset's picture; it wins over the type's `preview:` recipe.
- **`previewMaterial(self) -> { material }`**: the material a `surface` preview paints.
- **`saveDefinition(self)`**: writes the asset's in-memory edits back to its files in edit mode.
Some names are answered for every asset before the type is asked, so a `ref`
entry of the same name is never reached: `getSource`, `getBytes`, `getText`,
`exists`, `deps`, `canInstantiate`, `canPreview`, `preview` (which calls yours
when you define one), `meta`, `runtime`, `events`, `typeRef`, `modules`, and the
residency flags `has_backing_asset`, `has_runtime_changes`, `cpu_resident`,
`gpu_resident`.
### When the engine calls the type
| Hook | Signature | When it runs |
|---|---|---|
| `onCreate` | `(name, opts) -> { [path] = contents }` | On `asset.create`. Returns the files of the new asset, laid over the type's `template/`. Annotate `opts`: its type is the schema `asset.create` checks the caller's arguments against. A `""` key writes a single loose file. |
| `onReplace` | `(dest, files) -> files` | On an `asset.create` over an asset already at `dest`, after `onCreate`, so what the author added can be carried into the replacement. |
| `onRegister` | `(self)` | Once per asset, when it first registers: when the world loads, on a live `asset.create`, and when an asset arrives later (installed, pulled, synced). This is what makes an asset take effect the moment it is written. |
| `onChange` | `(ref, change)` | On every write to a file inside an asset of the type. `change` is `{ path, asset, type, kind, origin }`, plus `settings` and `settingsChanged` for a write to the settings values file; `kind` is `edited` or `seeded`, `origin` is `local` or `remote`. Filter on `change.path`. Writes to one asset arrive in order, each after the hook for the one before has finished, and the hook may wait on what it reads. A write the hook makes inside its own asset arrives later like any other, so keep the hook convergent. |
| `onDependencyChange` | `(ref, change)` | When a module the asset's code requires is re-run, or a name the asset carries starts resolving. `change.kind` is `dependency`. |
| `onDelete` | `(ref)` | When an asset of the type leaves the world: deleted, or the world it is in is swapped away. |
| `validate` | `(ref) -> { { code, message, severity?, path? } }` | On `asset.validate`, after the `type.yaml` checks, for the type's own rules. `severity` defaults to `error`. Runs on every push, so a type's rules hold at publish. A hook that fails reports `validate.hook_failed`. |
### Settings hooks
| Hook | When it runs |
|---|---|
| `settingsDefaults(name, opts, asked) -> table` | Once per `asset.create`, for values the schema's defaults do not give. |
| `settingsCorrections(values, name, opts) -> (corrections?, reasons?)` | On every settings write. A correction to a field the writer named refuses the write, giving the reason. |
| `settingsDerivedDefaults(values, explicit, changed)` | On a settings write, for fields derived from others. |
| `normalizeSettings(values, stored?)` | On every read and write, to map an earlier spelling of a field to the current one. |
| `settingsHealed(values, stored)` | On a read, to repair stored values. |
| `settingsSchemaProblem(schema, ref) -> string?` | When an asset's own schema is read; a returned string refuses the schema. |
`creationInputs` (`{ [opt] = true | selectorOpt }`) names `asset.create` options
that are inputs to the type rather than settings.
### Reloading
An edit to `behavior.luau` reaches existing assets with no restart.
## How an asset is pictured (`preview:`)
| `kind` | The picture is | The type provides |
|---|---|---|
| `instantiate` | the asset placed in the preview studio through its `instantiate` | `ref.instantiate` |
| `image` | a file the asset holds, fitted to the frame | `source: { files }`, the candidate files in order |
| `surface` | the asset painted on a mesh | `mesh`, and `ref.previewMaterial` |
| `custom` | whatever `ref.preview` returns | `ref.preview` |
```yaml
preview:
kind: surface
mesh: sphere
```
`angle: [yaw, pitch]` turns the camera. The studio owns the light, the backdrop
and the framing, so an asset pictures the same in every world. A type with no
`preview:` that defines `instantiate` still answers `ref:preview()`.
A picture is rendered when something asks to view it (the editor showing the
asset, `ref:preview()`), when previews are generated on request
(`assets.generatePreviews`), and when the asset is staged. An edit alone
renders nothing. The picture records what it was made
from, so a stale one is told from a current one.
## The names your type's assets hold (`references:`)
Where your type's own format or API carries the name of another asset, declare
it here:
```yaml
references:
keys: # a top-level key of the type's files that holds a name, or a table of them
- { key: "shader", type: "shader" }
args: # an argument of a call, counting from 1
- { call: "g:node", position: 2, type: "procNode" }
fields: # a field of the options table a call takes
- { call: "fx.beam", field: "material", type: "material" }
```
`type` is the category the name resolves in. `asset.declareReferenceKey`,
`asset.declareReferenceArg` and `asset.declareReferenceField` declare the same
from a script.
## What search reads (`indexing:`)
`indexing:` is how assets are found. Search reaches an asset only through what
its type's `indexing:` names, and adds nothing of its own. That includes you: an
asset indexed badly is one you cannot find later, when you are making something
else and need it. A type whose assets are never looked for says `indexing: none`.
```yaml
indexing:
data: # text, read from the asset's files
- role: identity
extractor: verbatim
source: { file: "README.md" }
- role: interface
extractor: symbols
source: { files: ["init.luau"] }
- role: implementation
extractor: verbatim
source: { files: ["init.luau"] }
content: # the picture
- role: identity
modality: image
source: { file: "preview.png" }
facets: # what a query filters and re-ranks by
file: ".metadata"
rigged: { type: bool, from: { components: { contains: SkinnedModel } } }
roughness: { type: number, filter: range, from: { file: "mat.yaml", field: "floats.roughness" } }
```
**Roles.** Each `data` and `content` entry has a `role`, and a query matches in
two slots:
- **`identity`**: what an asset is. For anything you look at, the picture; for anything else, the text that says what it is.
- **`capability`**: what it does and how it is made. `interface` (the signatures or shape a caller uses) and `implementation` (the body) both count as capability, and a type with code usually declares both.
Ask what a person would recognise an asset of the type by, and what it does, and
point each role at the file that says it. For text, that is the asset's
description: the file your template starts with a `[[describe]]` block, which the
author writes or `services describe` fills in (see "Ask your assets to say what
they are").
**`data`.** `extractor: verbatim` embeds a file's text as it is; `symbols` embeds
the declared signatures of code. `source` is `{ file }` or `{ files: [...] }`.
Never index a file name (`source: { field: name }`): one
or two words carry nothing to match.
**`content`.** `modality: image` embeds the picture itself, so a text query
matches what the asset looks like. A type whose assets are looked at makes the
picture its identity.
**`facets`.** What a query narrows and re-ranks the matches by. `file` is embedded
whole, so keys nobody declared in it are still found. Each further key is
computed for every asset and states a value for every one, including `false`: a
file can imply "not rigged" but never say it, and a query separates rigged from
unrigged only because the unrigged ones say `rigged: false`. A key is
`{ type: bool | number | enum, filter?: range, from }`, where `from` is
`{ file, field }` (a field of one of the asset's files, dotted for nesting),
`{ metadata: key }`, or `{ components: { contains | any_outside } }` (what the
asset's entities carry).
## What blocks a push
A push checks every asset it carries against its type. These refuse it:
- a required file that is missing, a `content` check that fails, a `described` file not written yet;
- an error from the type's `validate`.
Unlisted files and warnings do not. A `described` file blocks only a push that
changes the asset. When a push is refused, the message names each asset and what
it lacks. `world.publishBlockers()` and `zm status` read the same list without
pushing.
## Typing a result from the asset (`refShapes`)
A `ref` method whose result depends on the asset (one entry per child folder, per
row of a config, per control a map declares) can only be annotated as
`{ [string]: Thing }`, which accepts any key. `refShapes` states the result for
each asset instead: a function returning a Luau type expression for that asset,
and the module whose types the expression uses. Read the asset; never run it.
```lua
-- inputMap.assetType/behavior.luau
M.refShapes = {
activate = function(self): (string, string)
local names = {}
for _, control in ipairs(M.ref.controls(self)) do
table.insert(names, control.name .. ": Handle")
end
if #names == 0 then return "", "" end
return "{ " .. table.concat(names, ", ") .. " }", "@builtin::modules.zinput.scheme"
end,
}
```
With it, `map.jump:onPressed(fn)` is checked and `map.noexisting` is reported.
A per-asset type applies where the call site names which asset: a component
field whose default names it, or an annotation `AssetRef<"inputMap", "<identity>">`.
`asset.resolve(name, category)` carries only the category, and a name computed
at runtime carries nothing, so calls on those keep the declared return. The type
belongs to the call's result: index it there, or bind what you need from it
there, and the names stay checked.
`require("@builtin::assetTypes.assetType.shared.refShapes").published()` shows
what was published: `categories` (each type's method surface) and `returns`
(per-asset results by identity, then method). An identity missing from
`returns` was never published. Results are recomputed when an asset is written;
at most 64 assets of one type are read.
## Putting an asset in a scene (`ref.instantiate`)
A caller writes one piece of code against every instantiable type, so what
`instantiate` returns is fixed:
```lua
local Instantiable = require("@builtin::assetTypes.assetType.shared.instantiable")
M.ref = {
instantiate = function(self, target, opts)
local root = Instantiable.root(self, target, opts)
-- compose the asset under `root`, now
return Instantiable.result(self, root, idMap)
end,
}
```
**In.** `target` is the entity the asset lands under, or onto for a hierarchy
type; with none, the type spawns a new root. `position`, `rotation` (three
numbers in degrees, or a quaternion), `scale`, `name` and `temporary` mean the
same for every type: `Instantiable.root` applies them to a root you make,
`Instantiable.place` to one you adopt. Document any options of your own in the
hook's `--!arg` docs.
**Out.** `(root, idMap)`. `root` is the composed root, live when you return:
build synchronously, never defer to a component's `awake`. `idMap` maps each
original id to the spawned one, so a component that composes the asset again on
every load can pass it back in and keep references into the composition. Every
call goes through `Instantiable.result`, which refuses a root that is not live
and turns a missing `idMap` into `{}`.
## Inspecting an asset (`ref.inspect`)
`asset.inspect(ref)` builds a record every asset shares (`identity`, `name`,
`guid`, `source`, `typeName`, `typeDefinitionPath`, `scope`, `origin`,
`description`, `tags`), then calls `ref.inspect(self)` for the type's own
`detail`:
```lua
M.ref = {
inspect = function(self)
-- read the asset's own files, never runtime state: inspect works on an asset
-- that has not been compiled, uploaded or registered
return { --[[ what makes this asset what it is ]] }
end,
}
```
Without it, the record is the shared part alone, and an agent inspecting the
asset learns nothing of what it is. A hook that raises leaves `detail` empty and
sets `record.warning`.
## Discovery
- `asset.list("assetType")`: every registered type.
- `asset.inspect("<typename>")`: the type, its README and its `about.yaml` texts.
- `asset.resolve("<typename>", "assetType")`: the type itself.
# ambientOcclusion system
Ambient occlusion: the contact darkening of indirect light in corners, creases
and where objects meet.
Without it, every concave region takes as much ambient and environment light as
a flat one: a box resting on a floor has no seam, a corner is as bright as the
wall, and an untextured scene reads as plastic.
One effect answers one question: what fraction of the hemisphere above this
pixel is open. Its answer goes into the scene's occlusion channel before
anything shades, and PBR shading (`zero_pbr_shade`, which the `pbr` shader and
the materials built on it run) multiplies it into the indirect term alone
(ambient, irradiance, environment reflection). Direct light, emissive surfaces
and transparents keep the light they carry.
## Using it
The scene's occlusion is a component; author it once and it persists with the
scene:
```lua
local id = entity.spawn("ambient_occlusion").id
entity(id).component.add("AmbientOcclusion", {
intensity = 0.9, -- how far the darkening goes, 0..1
radius = 1.5, -- world-space reach
quality = "high", -- low | medium | high | ultra
})
```
Every field is live: edit one in the inspector and the shading follows. Setting
`intensity` to 0 turns it off without losing the rest.
For code that adjusts occlusion at runtime (a quality slider, a cutscene), reach
for the module directly, with the same options:
```lua
local ao = require("@builtin::systems.ambientOcclusion.ao")
ao.set({ intensity = 0.9 }) -- any subset; the rest is kept
ao.get() -- the settings in force
ao.qualityLevels() -- the cost each level pays
ao.active() -- is the pass running
ao.stats() -- what the pass built and ran this frame
ao.clear() -- off, settings kept
```
## What the knobs do
| field | effect |
|---|---|
| `intensity` | How far the darkening goes, in [0, 1]. 0 turns it off and releases the pass. |
| `radius` | World-space reach, roughly "how big is a crease worth darkening". Constant in world space, so it does not swell as the camera approaches. |
| `power` | Contrast curve on the visibility term. Above 1 deepens the dark end. |
| `thickness` | World-space thickness assumed for an occluder, so a thin foreground object stops occluding everything behind it out to the full radius. |
| `bias` | How far a neighbour must rise above the tangent plane before it raises a horizon, in [0, 1]. Raise it if a flat surface shades itself in patches; lower it if fine creases disappear. |
| `quality` | The cost of the estimate. See the table below. |
| `traced` | Trace the hemisphere against the scene acceleration structure while the scene's ray tracing is on (`renderer.setRaytrace(true)`). A frame drawn without ray tracing takes the screen-space estimate. |
| quality | screen-space slices x steps | depth taps per texel | traced rays per texel | resolution |
|---|---|---|---|---|
| `low` | 2 x 3 | 12 | 3 | half |
| `medium` | 3 x 4 | 24 | 6 | half |
| `high` | 4 x 6 | 48 | 6 | full |
| `ultra` | 6 x 8 | 96 | 12 | full |
The lower two levels compute occlusion on a half-resolution grid: a quarter of
the texels, each still costing its level's work. Occlusion is low-frequency
almost everywhere, and the filter that removes the sampling noise lifts the
coarse grid back to the frame in the same pass, weighting each texel by the
depth where it sits so silhouettes survive the upsample. What a half-resolution
grid loses is the innermost pixel of a sharp crease.
## How it renders
The pass runs at `afterDepthPrepass`, where this frame's opaque depth is
complete and nothing has shaded yet, in the `lighting` post stage:
1. The estimate. Screen-space, it is ground-truth ambient occlusion: a few
slices are walked through the texel, the steepest horizon is found in both
directions along each, and the visible arc between the two is integrated
against the cosine lobe around the normal in closed form. Traced, it is a
cosine-weighted hemisphere of short rays, and the fraction that reaches
nothing within `radius` is the visible fraction. Both reconstruct the
surface's normal from this frame's depth and store through one function.
2. The filter. Each tap is weighted by how close its depth is to the centre
pixel's, so the sampling noise goes without bleeding occlusion across a
silhouette. It writes the occlusion into the scene's occlusion channel
(`@scene.ao`).
PBR shading reads the channel at its own pixel the same frame, on the forward and
deferred paths alike. Depth and camera come from the render target
being drawn (`@scene.depth`, `@frame.camera`), so the result is correct in
offscreen captures and render-to-texture cameras at their own resolutions. Sky
pixels have no surface to occlude.
## Seeing the occlusion on its own
While occlusion is running, `ambientOcclusion` is a capture view: the filtered
visibility with no scene colour, white where the hemisphere is open and dark
where it is closed.
```
capture { pass = "ambientOcclusion" }
```
It is the fastest way to tell a shading problem from an occlusion one, and to
compare two `radius` values or quality levels without the lighting in the way.
## Files
```
ambientOcclusion.package/
AmbientOcclusion.component/ -- the scene's occlusion, authored and persisted
ao.module/ -- ao.set / .get / .qualityLevels / .active / .stats / .clear
ambientOcclusion.renderFeature/ -- the pass: estimate, filter, occlusion channel, capture view
ao_common.shaderModule/ -- the prelude both estimators are written against
ao_pass.computeShader/ -- the screen-space estimate
ao_trace.computeShader/ -- the traced estimate
ao_filter.computeShader/ -- the depth-aware filter that writes the channel
```
# assetType runtime
The machinery that reads a `<typename>.assetType/behavior.luau` and turns its
declarations into live behaviour.
A `behavior.luau` is a table of declarations — `ref` methods, `modules` shared
code, an `events` schema, a `namePattern`, `refShapes`, and the `onCreate` /
`onRegister` / `onChange` / `onDelete` / `validate` / `settingsDefaults` /
`settingsCorrections` hooks. None of it runs itself. This is the code that
runs it, and it lives here because reading a type's declarations is the
**assetType type's own behaviour** — the same way `material.assetType` owns
what a `.material` does.
## Sub-modules
| Module | Reads | Responsibility |
|---|---|---|
| `ref.module` | `ref`, `modules` | Builds every `AssetRef` envelope, attaches the shared metatable, and dispatches per-type methods and shared modules onto it. Also owns edit-mode write-behind persistence. |
| `create.module` | `onCreate`, `namePattern`, `validate` | Backs `asset.create`: resolves the type, checks the name against its pattern, runs `onCreate` (or clones `template/`), and writes the instance. `validate.module` beside it checks a creation `opts` table against the type's `createSchema`. Before running `onCreate`, resolves the type's settings chain (below) and hands the result to the hook as `opts.settings`. |
| `settings.module` | `settings`, `settingsDefaults`, `settingsCorrections` | A type's declared settings schema and where its values live (`type.yaml`'s `settings:` block). `Settings.resolveForCreate` layers the schema's own defaults, the type's own `settingsDefaults(name, opts, asked)` hook (a DEFAULT the schema can't express — a name-derived convention, a fact read off a payload the caller handed it, a value following a field `asked` shows a higher layer naming; any later layer overrides it), the Preset Manager, an importer's settings, the caller's `settings` table, then the type's own `settingsCorrections(values, name, opts)` hook (a CROSS-FIELD CONSTRAINT the schema can't express, applied last over the fully merged values). A correction over a default/preset/importer value lands silently; a correction that would override what the caller's own `settings` table explicitly asked for refuses the creation instead, naming the field and why. Neither hook is ever handed a table to mutate; each returns what it wants changed (`settingsCorrections` may also return a `{ [field]: reason }` table for that refusal message). `Settings.cloneValues` deep-copies a values table — `create.module` hands `onCreate` a copy, never the table it stamps. `Settings.valuesOf` / `writeValues` read and write an asset's own values file. |
| `typeYaml.module` | `type.yaml` | The folder a type lives in and its parsed `type.yaml`, decoded once per content version of the file. `settings.module` and `inspector.module` read their blocks through it. `about` / `aboutAt` read a type's `about.yaml` (`intent`, `function`, `usage`), leaving out any key that is empty or still starts with `[[describe]]`; `aboutRows` and `aboutMarkdown` lay the texts out for the Inspector and the `types/<name>` guide. |
| `inspector.module` | `type.yaml`'s `inspector:` block | Which inspector a type declares for its assets (`inspector: { type: ... }` or `{ instance: ... }`), and the declaration that file returns — the sections it adds, the generic ones it replaces, and their order — or the problem that kept it from loading. |
| `onRegister.module` | `onRegister` | Fires an instance's once-only registration hook — on arrival, on world load, and for `@builtin` library instances. |
| `changeDispatch.module` | `onChange`, `onDelete`, `refShapes` | Routes a VFS source write or a folder delete to the enclosing typed asset's type hooks. |
| `refShapes.module` | `refShapes`, `ref` | Publishes what every `AssetRef<category>` answers to, so a member read on an asset-typed value is checked against that category's real surface. |
| `events.module` | `events` | The per-asset event runtime behind `ref.events`. |
| `instantiable.module` | `ref.instantiate` | The instantiation contract an asset type opts into: `root` stands the root entity, `place` applies the base placement opts to one the type adopted, and `result` shapes the `(root, idMap)` every `instantiate` returns. Also registers the `sceneInstantiable` field-constraint validator. |
| `declaration.module` | `type.yaml` | The type's decoded declaration, read once and held until a write inside an `.assetType` folder; what every question about a type as a whole reads. |
| `previewRecipe.module` | `type.yaml` `preview:` | How an instance's `preview.png` is produced: which of the four recipes (`instantiate`, `image`, `surface`, `custom`) the type declares, and what that recipe needs. |
## Reaching it
```luau
local rt = require("@builtin::assetTypes.assetType.shared")
rt.ref.loadTypeBehavior("material")
```
Fields resolve lazily. The prelude requires the sub-modules directly, in
dependency order (`ref`, then `changeDispatch`, `onRegister.install()`,
`refShapes.install()`) — a table that required all six on load would take that
ordering away from it.