Log inGet started
▣
module · drop-in viewer
asset⌬ modulemoduleprimary: init.luau·part ofmodule inspector.module·originates fromworld 07158574-5…

settingsSection

The Settings section: every field of `ctx.schema` as its typed control (a dropdown for an enum, a ranged number, a toggle, a colour, a vector, an asset chip, a nested group for a struct or `settingsOf`, an editable list), in the order the schema declares them, with `ctx.settings`…

by◐lumi·posted 1mo ago
What it does

edui.inspector.settingsSection

The Settings section: every field of ctx.schema as its typed control (a dropdown for an enum, a ranged number, a toggle, a colour, a vector, an asset chip, a nested group for a struct or settingsOf, an editable list), in the order the schema declares them, with ctx.settings as the values and ctx.setSettings as the one write. A field's last rejected edit shows its message beneath it.

local SettingsSection = require("@builtin::editor.edui.inspector.settingsSection")
local Inspector = require("@builtin::editor.edui.inspector")

local ctx = Inspector.valuesContext{
    subject = "my-values", schema = schema, values = values,
    write = function(patch) --[[ store the checked patch ]] end,
    selection = { scope = "asset", id = "my-values" },
}
local nodes = SettingsSection.build(ctx)

build(ctx) reads only ctx.schema, ctx.schemaProblem, ctx.settings, ctx.setSettings, ctx.rejected, ctx.widgets and ctx.keyPrefix, so any source of values renders through it: an asset's settings.yaml, a component's live values, a preset's stored values.

Actions

SettingsSection.ACTIONS is the list of buttons offered beneath the fields: { id, label, applies(ctx) -> boolean, run(ctx), panel?(ctx) -> { node }? }. Every action whose applies(ctx) is true renders, in list order, with the callback key <ctx.keyPrefix>:setact:<id>; while an action is open its panel(ctx) returns the nodes shown beneath the row (a name field, a list to pick from). Appending an entry offers that action on every Settings section. It ships with:

  • reset ("Reset to defaults") — writes every declared default through ctx.setSettings.
  • saveAsPreset ("Save as preset") — a name field and Save: captures the values as a preset targeting their declarer (preset.capture) and selects it.
  • applyPreset ("Apply preset…") — lists the presets whose target is this subject's declarer; picking one applies it as one undo step.

The two preset actions are edui.inspector.presetActions; they apply to an asset's Settings section and to a component card's.

A Context whose actions is set offers only the actions it names: actions = {} offers none, which is what a preset's own values use.

SettingsSection.release(keyPrefix) forgets what the actions keep under a Context's key prefix.

Interface

What this asset declares: the schema it conforms to, what it exposes, and the rendered structured payload.

conforms to

zero/source-extract/v2

module edui.inspector.settingsSection The Settings section: every field of `ctx.schema` as its typed control, `ctx.settings` as the values, `ctx.setSettings` as the one write, each field's last rejection shown on it, and `ACTIONS` beneath.

applies(ctx: any) → void

argtypedescription
ctxany

run(ctx: any) → void

argtypedescription
ctxany

build(ctx: any) →

The section body for `ctx`. Reads only `ctx.schema`, `ctx.schemaProblem`, `ctx.settings`, `ctx.setSettings`, `ctx.rejected`, `ctx.nameOf`, `ctx.widgets` and `ctx.keyPrefix`, so any source of values (an asset, a component, a preset) renders through it. Fields show in the order the schema declares them.

argtypedescription
ctxanyThe inspector Context.

examples

local nodes = SettingsSection.build(Inspector.valuesContext{ subject = key, schema = s, values = v, write = w, selection = sel })

fields(ctx: any) →

The field rows alone — one typed control per schema field — for a caller that shows values without the actions beneath them. With no `ctx.schema`, the one row naming the schema problem, or that none is declared.

argtypedescription
ctxanyThe inspector Context.

examples

local rows = SettingsSection.fields(ctx)

fieldRows(ctx: any, fields: { [string]: any }) →

One typed control per field of `fields` (a schema, or part of `ctx.schema`), in declaration order, each writing through `ctx.setSettings`. Aliases are skipped. `ctx.admit` narrows every asset chip, asked with the chip's path from the field (`presets[2].preset`); `ctx.openFields` shows structs and lists open.

argtypedescription
ctxanyThe inspector Context.
fields{ [string]: any }The field descriptors to show.

examples

local rows = SettingsSection.fieldRows(ctx, ctx.schema)

onChange(v: any) → void

argtypedescription
vany

actionRow(ctx: any) → any

The row of `ACTIONS` that apply to `ctx` (only those `ctx.actions` names, when it is set), each acting on the whole of `ctx.schema`, with the panel of each open action and the outcome of the last preset save or apply beneath it; nil when no action applies.

argtypedescription
ctxanyThe inspector Context.

examples

local row = SettingsSection.actionRow(ctx)

onClick( ) → void

release(keyPrefix: string) → void

Forget what the Settings actions keep under `keyPrefix` (an open panel, a typed name, an outcome) and every prefix nested in it.

argtypedescription
keyPrefixstringA Context's `keyPrefix`.

examples

SettingsSection.release(ctx.keyPrefix)
⌬ Types
SettingsAction = {

Sub-parts

Everything contained inside this part. Assets are composite children (clickable cards). Files are leaf payloads. Expand any row to view its source.

Showing up to 3 levels deep. Open a part to see what it holds further down.

40+items
·
assettype · born here
❒asset
# Module (asset type) A module is a reusable, stateless (or globally-stateful) Luau library that other code pulls in with `require()`. Modules are the unit of factored-out logic in a world: helpers, math libraries, format parsers, registries, shared algorithms. ## When to use one - You have logic you want to share across multiple components, services, scenes, or tools. - You have a registry, lookup table, or shared cache that callers all read from / write to. - You want a stable API surface (`M.fn`) other code can depend on. If the logic is bound to one entity, use a `.component`. If you want a named UI of fields rather than functions, use a `.preset`. ## Where it lives - Source: `/zero/source/.../<name>.module/` - Identity: the source path with `/` written as `.` and each segment's type suffix dropped — `/zero/source/demo/beats.module` is `demo.beats`, and `/zero/source/kit.package/beats.module` is `kit.beats`, the container's name kept and its `.package` suffix gone. `asset.create` returns this string, `asset.resolve(...).identity` reads it back, and the `require` forms below write it as `<identity>`. - Folder shape: - `init.luau` (or `init.lua`) — module body. **Required.** Returns a table (conventionally named `M`). - `README.md` — instance-level documentation. **Required.** - `.metadata` — agent-editable tags + free-form fields. **Required.** ## How to create one ```luau asset.create("module", "<name>") -- Creates: /zero/source/<name>.module/ -- init.luau (canonical `local M = {} … return M`) -- README.md (instance README template) -- `folder` places it in a subfolder of /source, and that subfolder -- leads the identity: `{ folder = "lib" }` produces `lib.<name>`. -- `into` authors it inside a resolved container (a package, a toolbox), -- whose own identity leads the same way: asset.create("module", "<name>", { folder = "lib" }) asset.create("module", "<name>", { into = asset.resolve("myPkg.package") }) ``` ## How it operates 1. **Registration.** Writing `init.luau` into a `.module/` folder indexes the asset and registers the module path with the resolver. 2. **Loading.** The first `require("<identity>")` runs the file's body and caches the returned table. Subsequent requires from anywhere return the **same table** — this is the shared-state lever for "module-local" registries. The body runs in an environment of the module's own: a name it declares without `local` is readable by the module's own functions and by no other script, so an export reaches its callers through the returned table and nothing else. Requiring a component's folder runs its chunk the same way, once, and its `update`, `start` and `public` stay in that environment; a component runs on an entity through `entity(id).component.add(name)`. 3. **Hot reload.** Editing the file re-runs the module body and folds what it returns into the table already loaded, so that table keeps its identity: a caller that captured it with `require` reads the new source's functions and values through the reference it already holds, and a later `require` returns that same table. A key the new source drops goes away; a key something set at runtime stays. The body's own `local`s start again from their initial values, so state that must outlive an edit lives in `modules.state()` (`guides { path: "core/scripting-and-tasks" }`). 4. **Identity resolution.** A module is reached by its `<identity>`, and where the caller lives decides which spelling of it resolves. For a module in a **world**, from a caller in that same world — another module, a component, a scene entrypoint, or an `execute` chunk: - `require("<identity>")` — the identity on its own, resolved against the caller's own root. It carries every folder segment, so a module created with `{ folder = "demo" }` is `require("demo.beats")`. - `require("@root::<identity>")` — the same root-relative resolution, written out. - `require(".sibling")` — a module in the same folder, by its bare name; `..name` steps up one folder, `...name` two. Logs, stack traces and hot-reload notices name that same module `@local.source.<identity>` — its key under the world source root. The `<identity>` tail of that key is the form above, so a trace reading `@local.source.demo.beats` is `require("demo.beats")`. For a module in a **library** — content under `/zero/source/libs/@<lib>/` — `@<lib>::` addresses that library's root from anywhere: `require("@builtin::modules.transform")`. Mounting a world as a library moves its files under such a root and flips the caller root to `@<lib>::`, which is what keeps the root-relative forms above resolving across the move. ## Discovery - `asset.list("module")` — every registered module. - `asset.inspect("<name>")` — public functions, source path, this type README. - `ls /zero/source/<name>.module` lists the files the folder holds. ## Authoring conventions - Return a single `M` table from `init.luau`. Top-level statements with side effects run on first require — useful for one-time initialization, dangerous if they touch the engine before it's ready. - Write exported functions as `typed function`, not `function`: the argument types are enforced at the call and the checker knows the signature, so a caller's mistake is reported where they made it. - Annotate exported functions with `--!desc` / `--!arg` / `--!return` / `--!example` so the LSP, `tools.list`, and `asset.inspect` surface them. A function with no `--!desc` is reachable only by someone already reading this file. - Declare a VALUE with `Field.<kind>(default, mode, description)`, and a table whose members are reached through a metatable with `--!members <TypeName>` — the latter gives the surface its accepted member set, its type, and its documentation from one table. See `guides { path: "core/authoring" }` for all four rules and `modules/api/engine/entity.module/members.module` for a worked member table. - Keep module state in module-local upvalues or in `modules.state()`. A name the body declares without `local` lives in the module's environment, which every run of the module shares: a function the previous run left in place reads what the reload assigned. Module-locals start again from their initial values with each hot reload; the table `modules.state()` returns is the same table on both sides of every reload. - Prefer focused modules over kitchen-sink modules. If two halves of a module have no shared state, split them. ## Common pitfalls - **Cyclic requires.** A `require` chain that loops will return the partial table (the half built before the cycle was detected). Design for one-way dependencies. - **Engine-time side effects.** Don't `entity.spawn` at module top-level — the engine may not be ready. Expose an `M.init` and call it from a scene entrypoint. - **Hot-reload + module-local cache.** A module that caches expensive computation in upvalues loses that cache on reload — fine for dev, but be aware in performance work. - **`init.lua` vs `init.luau`.** Either works, `.luau` is canonical. - **Writing one while play runs.** A `/source` write made while play is running lands on the play shadow, and a guarded play-exit discards it unless it is kept. One `.module` write shadows `init.luau`, the `README.md` and the `.metadata` together. `vfs.write(path, bytes, { durable = true })` skips the shadow, and `vfs.promotePlayShadow` keeps what is already on it — the `core/vfs` guide has the model and what each route costs. ## Related types - `.component` — for entity-bound state + lifecycle hooks. - `.service` — generates content you don't have yet (a mesh, sound, texture, …) via a metered provider. - `.tool` — for a single agent-callable function with a YAML schema. - `.package` — to group several modules + components + scenes into one shippable folder. ## In the Inspector Exports: what the module exports (name, kind, signature), parsed from its source without running it, with **Check** (the LSP's diagnostics for its entry file) and **Open**.
▲ 0↑ born
▣
module · born here
❒asset
# assetType.shared.settings Resolves four questions about an asset's typed settings, all answered from its type's `type.yaml` — nothing here is found by convention. ```lua local Settings = require("@builtin::assetTypes.assetType.shared.settings") -- or, from inside the assetType runtime: local Settings = require("@builtin::assetTypes.assetType.shared").settings ``` ## Where does a type's schema live? `type.yaml` names it in a `settings:` block: ```yaml settings: values: "settings.yaml" # where an instance's own values live schema: { type: "settings.luau" } # one schema for every asset of this type ``` or, for a type whose settings differ per instance (an importer): ```yaml settings: values: "settings.yaml" schema: { instance: "settings.luau" } ``` or, for a type whose schema is a table its instance's own source declares and whose values live elsewhere (a component: its `public` fields, valued on each entity it is on): ```yaml settings: schema: { instance: "init.luau", export: "public" } ``` Whether an instance may lack its schema file is what the type's `files:` block says of that file. Listed under `files.optional`, it may be absent, and an instance without it declares no settings — the importer type lists it there, since most importers take none. Listed under `files.required`, or not listed at all, it must load, and an instance missing it is a broken declaration and is logged. `schema.type` is required at the folder relative to the TYPE's own `.assetType/` directory (one schema shared by every instance). `schema.instance` is required relative to each INSTANCE's own folder (`init` resolves the instance's own identity; anything else is a sibling module under it). Without `schema.export`, the file is required as a module and its return value IS the schema. With `schema.export`, the file is run in an environment of its own and `export` is read from a returned table carrying it, or else from the globals the file assigned — a component's `public` is such a global. That environment reads through to `_G` and takes every write itself; its own `_G` is itself, its `declare` and `computed` record into it, and its `task` records spawned, deferred and delayed work instead of starting it. Every other global is the real one, so a call the file makes through one runs as it does anywhere. The schema is the declared table's Field descriptors. A schema that resolves to nothing says why through `Settings.schemaProblemOf(ref)`: the file could not be read, compiled or run, or declared no such table. An instance schema is read again when its file, its type's `type.yaml`, or the entry file of any module the asset `require`s changes. `Settings.blockFor(typeName)` returns the raw block; `Settings.schemaForType(typeName)` and `Settings.schemaOfInstance(ref)` resolve the two schema shapes respectively; `Settings.schemaFor(ref)` tries the type-level schema first, falling back to the instance-level one. `ref` naming an assetType asset itself — e.g. `asset.resolve("texture", "assetType")`, rather than an instance of it — reports that type's own declared schema, the same one every instance of it reports. ## Where do an asset's values live? `settings.values` names a file living beside the asset's own content — `Settings.valuesPathOf(ref)` joins it onto the asset's path. `Settings.valuesOf(ref)` / `Settings.writeValues(ref, values)` read and write it; this module only names where it is. A type that declares its schema with no `settings.values` keeps no values in the asset — a component's live on each entity it is on — so `valuesOf` answers nil for it, `asset.create` refuses a `settings` table for it, and `asset.setSettings` refuses a write. `Settings.recordedWrite(path, text)` writes a file the way every values file is written, and an editor uses it for any other file it writes. It writes the whole contents, records the write into the open undo operation when one is open (so undoing it restores what the file held), and raises when the write does not land. ## In what order are a schema's fields declared? Every `Field.*` constructor stamps its descriptor with `declaredOrder`, one more than the last. Luau evaluates a table constructor's entries in the order they are written, so `Settings.orderedNames(schema)` lists a schema's fields — and a struct's subfields — in the order the source writes them. A values file, or a legacy `.metadata` settings block, may hold an older spelling — a renamed field, an older enum member. Every read passes what is stored through the type's `normalizeSettings` (`Settings.normalizeFor`), so it answers in the fields the schema declares today, and writes nothing. The next local edit of that asset rewrites the file in the declared spelling (`Settings.healLegacyIfNeeded`). `asset.setSettings(ref, patch)` writes a partial patch: `Settings.resolvePatch(ref, patch)` normalises it, merges it over the current values and applies the type's derived defaults for the fields it changed, and `Settings.writeValues(ref, values, patch)` applies the corrections, checks the schema and writes the file. ## How is a new asset's settings resolved at creation? `asset.create` calls `Settings.resolveForCreate(typeName, name, destPath, creationOpts, callerSettings, importerSettings)` before running the type's `onCreate`, checks the result against the schema, writes it to the values file, and hands `onCreate` a COPY of it as `opts.settings` (`Settings. cloneValues`) — never the same table the values file gets, so nothing `onCreate` does to its own copy can reach what was stamped. `onCreate` reads settings from `opts.settings` and never writes to it. `asset.create` also seeds the change baseline with the stamped values (`Settings.seedChangeBaseline`), so the values file's own first dispatch reports nothing changed and the payload `onCreate` encoded is the only encode a create runs. The layers, lowest priority first, each overriding the ones before it field by field: 1. The schema's own declared defaults (`Settings.defaultsOf`). 2. The type's own `settingsDefaults(name, opts, asked)` hook, when its `behavior.luau` exports one. `asked` holds what layers 3 to 5 name, so a default can follow a field one of them sets. 3. The Preset Manager's matching row (`Settings.presetLayerFor`). 4. The creating importer's settings for this type. 5. The `settings` table the caller passed to `asset.create`. 6. The type's own `settingsDerivedDefaults(values, explicit, changed)` hook, when its `behavior.luau` exports one — a field whose default follows another field, set only when no layer from 2 to 5 named it. 7. The type's own `settingsCorrections(values, name, opts)` hook, when its `behavior.luau` exports one — applied last, once every other layer has merged. Layers 2 to 5 are each read through the type's `normalizeSettings`, so a layer naming a field in an older spelling sets the field it names today. `asset.create`'s top-level settings alias accepts those older names too (`Settings.acceptedFieldNames`). Layer 7 is `Settings.applyCorrections(typeName, values, explicit, context)`, the one corrections path every settings write takes — this create chain, and `Settings.writeValues` for every later write (`asset.setSettings`, a type's first-encode seed, the legacy heal). `explicit` names the fields the writer asked for: the caller's `settings` table here, the patch for `asset.setSettings`. A correction lands SILENTLY on a field the writer did not name — nobody asked for that value, so overriding it just states a fact. A correction that contradicts a field the writer named REFUSES the write, naming the field, the value asked for, and why it cannot hold — the same as every other place this codebase refuses an explicit request it cannot satisfy (a `Field.checkSchema` violation, a BC7 alignment error) rather than silently rewriting it into something else. So `asset.setSettings(tex, { compression = "rgba16" })` on a mipped texture stores `generateMipmaps = false` beside it, while `asset.setSettings(tex, { compression = "rgba16", generateMipmaps = true })` is refused. `Field.checkSchema` runs once, over the result AFTER the corrections hook has applied — a bad value nothing corrects refuses the creation. ### Four hooks, four different jobs Every hook is an optional export on a type's `behavior.luau`, alongside `onCreate` / `onChange`. **None is ever handed a table to mutate** — each reads what it's given and RETURNS a table of what it wants changed (or nil); `resolveForCreate`, `resolvePatch`, `applyDerivedDefaults` and `applyCorrections` are the only places that write to the values, by merging what a hook returns the same way every other layer merges. - **`normalizeSettings(values) -> values`** maps every older spelling a stored file or a write may carry to the field and member the schema declares now, returning a new table; a table naming both an older field and its replacement keeps the replacement. The companion export **`normalizedSettingNames = { ... }`** lists the older field names it accepts beyond the schema, so a write naming one is not refused as an undeclared field. `texture.assetType`'s maps the fields its earlier schema stored to `colorSpace` + `compression`, and the older `filter` keywords to `linear` / `nearest`. - **`settingsDerivedDefaults(values, explicit, changed) -> partial?`** answers the values of fields whose default follows another field. At creation `changed` holds every field; on a write it holds the fields the write moved. A returned field applies only where `explicit` — the fields the writer named — does not name it. - **`settingsDefaults(name, opts, asked) -> partial?`** supplies a DEFAULT the schema itself has no syntax for — something only knowable at creation time, like a naming convention, a fact read off a payload the caller handed in, or a value that follows a field a higher layer sets (`asked` holds what the Preset Manager, the importer and the caller name, the higher one's value where two name a field). It runs early (layer 2 above), so any later layer — Preset Manager, importer, caller — freely overrides it. `texture.assetType`'s returns the `textureType` the name suggests (a `_normal`-suffixed name is a `normalMap`), `compression = "uastc"` and `maxDimension = 4096`, with `rgba8` for a `textureType` of `sprite` that a higher layer names; for a pre-encoded ZTEX payload it returns the colour space, compression and sampler the payload's own header carries. Either way, an explicit `settings = { ... }` from the caller still wins. - **`settingsCorrections(values, name, opts) -> (partial?, reasons?)`** enforces a CROSS-FIELD CONSTRAINT the schema itself has no syntax for — a fact about one field that depends on another field's resolved value, true regardless of which layer produced that value. It runs last (layer 7 above), over the fully merged `values`, and again on every later write of the values file. Nothing is left unmet in what gets validated and stamped — but a value the caller explicitly asked for is never silently rewritten to satisfy it; `applyCorrections` refuses instead (see above). The optional second return, `{ [field]: reason }`, supplies the "why" for that refusal message; a field with no reason falls back to a generic one. `texture.assetType`'s returns `{ generateMipmaps = false, maxDimension = 8192, colorSpace = "linear" }` whenever the RESOLVED `compression` is high-precision (the encoder stores one verbatim, linear, and refuses a mip chain or a downsample for it outright), paired with a reason naming the compression, and `nil` otherwise. ## What does a declarer declare? `Field.settingsOf(identity, mode)` embeds another declarer's schema as a struct field without restating it. The identity names one of two kinds of declarer, and `Settings.schemaOfDeclarer(identity)` tells them apart by what `identity` resolves to: - **An assetType** (e.g. `"@builtin::assetTypes.texture"`) — embeds the schema every instance of that type carries, resolved via `schemaForType`. This is the type-level shared schema from the section above, not a per-instance one — an assetType has no settings of its own to declare per instance. - **Anything else** (an importer, or any other asset that declares settings of its own) — embeds that asset's own schema, resolved via `schemaOfInstance`. Every schema this module serves has already run its `Field.settingsOf` fields through this resolution — a caller reading `schema.someField.fields` never sees an unresolved `declarer` with no `fields`. Resolution descends into an already-literal struct's `fields` and a list's `element` the same way, so a declarer embedded several fields deep is still reached. A declarer that embeds itself, directly or through another declarer, stops one level short of the loop instead of recursing forever. ## What are the defaults? `Settings.defaultsOf(schema)` reads every field's declared `default` into a plain table — a field declared without one is absent from the result rather than holding a `nil` value.
▲ 0↑ born
▣
module · born here
❒asset
# edui.inspector.presetActions The Settings section's preset actions, offered on an asset's Settings section and on a component card's: - **Save as preset** opens a name field beneath the section. Save captures the values the section shows as a typed preset targeting the declarer that governs them (`preset.capture`), and selects the new preset. A bare name lands in `/source/presets`; a path ending in `.preset` lands where it says. A name the capture refuses shows its reason beneath the section. - **Apply preset…** lists the presets whose target is that declarer. Picking one applies it to the section's subject (`preset.apply`) as one undo step, and the outcome — the fields written, and any the target refuses — shows beneath the section. ```luau local PresetActions = require("@builtin::editor.edui.inspector.presetActions") local subject, declarer = PresetActions.subjectOf(ctx) -- asset ref, or { entity, component } for _, c in ipairs(PresetActions.presetsFor(declarer)) do -- { ref, guid, name } print(c.name) end local outcome = PresetActions.applyInto(c.ref, c.name, { subject }) -- { text, tone } ``` `SAVE` and `APPLY` are the two entries `settingsSection.ACTIONS` carries. `release(keyPrefix)` forgets the open action, typed name, listed presets and outcome kept under a Context's key prefix; `Inspector.release` calls it.
▲ 0↑ born
·
assettype · born here
❒asset
# assetType (asset type) An asset type says what a kind of asset is: the files an asset of the kind is made of, the code that gives it behaviour, the interface a person uses to work with it, and how it is found, pictured and checked. A `<typename>.assetType/` folder declares a type called `<typename>`, and every `<name>.<typename>/` folder is an asset of it. `assetType` is itself a type, so a type is an asset like any other: it is created, versioned, installed and contributed the same way. ## Making a type `asset.create("assetType", "<typename>")` scaffolds a type. The type registers the moment its folder is written, anywhere under `/zero/source/`, and from then on `<name>.<typename>/` folders are its assets. An asset of a type that is not registered yet is not an asset, so make the type first. A type folder is a root: `~.x` in any file inside it names the type's own `x`, wherever the type is installed. Keep the type's whole implementation inside its folder and reach it that way. What a type folder must hold is set by this type's own `type.yaml`, the same way every type's `type.yaml` sets what its assets hold. `asset.validate` on a type reports anything missing, and the scaffold produces a folder that passes. ## What sets your type's schema (`type.yaml`) `type.yaml` is the structural contract every asset of the type is checked against. The keys below are the ones the engine reads; a key not listed here is ignored. | Key | What it controls | |---|---| | `suffix` | The folder suffix of the type's assets. Defaults to `.<typename>`. | | `primary` | The file or files that are the asset's content: what the asset resolves to when it is used. | | `entry_files`, `primary_aliases` | Further files that load as the asset or share its identity. | | `is_container` | Whether the suffix stays in the identities of what the asset holds. | | `is_opaque_walker` | Whether a walk of the tree stops at the asset and registers only its primary. | | `plural_dir`, `classify_exts` | Loose files in a folder of this name, or with these extensions, are assets of the type. | | `is_text_default` | Whether the asset's files are text unless stated otherwise. | | `broadcasts_subassets` | Whether assets nested inside an asset of the type are found by their own short name. | | `root` | `true` makes every asset of the type a root, so `~.x` inside one names that asset's own `x`. | | `contract_ref: { field, category }` | A key of the primary file that names another asset the asset is built on. | | `files: { required, optional }` | The files an asset holds (below). | | `allow_unlisted` | `false` reports every file the type does not declare. | | `aliases_from: [{ file, key }]` | Further names an asset answers to, read from its own files. | | `settings:` | Typed per-asset settings (below). | | `inspector:` | The interface people use for the type and its assets (below). | | `preview:` | How an asset is pictured (below). | | `references:` | Names of other assets the type's files carry (below). | | `indexing:` | What search reads for each asset (below). | | `describe:` | How a missing description is generated (below). | ### The files an asset holds Each entry under `files.required` or `files.optional` is `{ path, kind: file | folder, one_of_group?, content? }`. `*` in a path matches within one segment. Entries that share a `one_of_group` are satisfied by any one of them. `content` lists checks on the file's bytes: | Check | Passes when | |---|---| | `non_empty` | the file has content | | `json_field { key, type?, non_empty?, accept? }` | the JSON holds the key (a dotted path) with that shape | | `yaml_field { key, type?, non_empty?, accept? }` | the same for YAML | | `described { keys?, headings?, message? }` | the file says what the asset is (see "Ask your assets to say what they are") | Each check takes a `message`, which is what the author is told when it fails. ### Settings `settings: { values, schema: { type | instance, export? } }` gives every asset typed settings. `values` names the file an asset's values live in; `schema.type` declares one schema for the whole type, and `schema.instance` names a file each asset declares its own in. `asset.create` writes the resolved values, and a write to the values file reaches `onChange` with what changed. ## The human side (`inspector.luau`) A type is used by people through its Inspector, and without one the type is usable only from code. The Inspector is the type's interface for a person: for a procedural graph it is the graph editor, for a kit it is the tracking view of what the kit holds and what is still missing. Writing it is part of writing the type. `inspector: { type, instance? }` in `type.yaml` names the files. `type` is the interface for the type itself and for its assets; `instance` names a file an asset may ship to add its own. Each returns: ```luau return { sections = { { id = "graph", title = "Graph", build = function(ctx) ... end } }, replace = { contents = { ... } }, -- replace a default section by id order = { "graph", "contents" }, -- section order } ``` `build(ctx)` receives the asset and builds the section. A section's `title`, and the text its rows carry, is a string or an `i18n.text` value read from a catalog (`i18n.text("inspectors.mesh.title")`), which follows the editor's language. `asset.create("assetType", ...)` scaffolds a working `inspector.luau` to start from. `asset.validate` on a type that names no inspector, or names one that does not load, reports it. ## Say what your type is for (`about.yaml`) Every type carries an `about.yaml` that says what the type is for, in three plain-language texts: ```yaml intent: "Sets the typeface of the text in your game: UI, labels, signs and 3D lettering." function: "A font, from a TTF, OTF or WOFF file, made available to all of Zero's text, including 3D text." usage: "You choose it by name for your UI or your text, and the text appears in that typeface." ``` - **`intent`** is what the type is for in someone's game, in the words a game maker uses. Up to 800 bytes. - **`function`** is how it works today: what an asset of it is made of and what the engine does with it. Up to 1500 bytes. - **`usage`** is what a person or an agent does with one. Up to 1200 bytes. Write about the type as a whole, not one asset of it, and say what it does now. Agents read these texts to learn when to reach for the type and how; people searching find the type by them. The scaffold starts each text with `[[describe]]` and a note on what to write; a text that still starts that way counts as not written. `services describe` can write them. They show up in `asset.inspect` as `detail.about`, in `assetTypeRef:getAbout()`, at the end of the type's `types/<typename>` guide, and at the top of the type's Inspector. ## Ask your assets to say what they are A type can require each asset to carry a description: a file, written by the author or generated, saying what the asset is and what it is for. Declare it with a `described` check: ```yaml files: required: - path: "README.md" kind: "file" content: - { check: "described", message: "Say what this widget is for and where it goes." } ``` A file that is missing, empty or still has a line starting with `[[describe]]` fails the check, and so does a YAML file whose named `keys` are missing or over their `max_bytes`, or a Markdown file missing a named heading. `asset.validate` names the asset, and a push that carries it is refused with `message`. `services describe` finds such assets and writes their descriptions. `describe:` steers what is generated: ```yaml describe: guidance: "Say what the widget shows, what input it reacts to, and where it fits in a UI." examples: - "<identity of an asset of this type whose description reads well>" ``` An example is an asset of your type whose description is a true, written one, never a placeholder and never the asset being described; with none, leave `examples` empty. A type whose assets the model cannot perceive (a sound, a motion) says so in `guidance`, and the description is drawn only from what the asset's own files state. Start the file unwritten in your `template/`: a heading and one line starting with `[[describe]]`, never example content, which every new asset would carry verbatim. A type whose assets say what they are through their own content (a mesh, a texture) declares no check. ## The type's code (`behavior.luau`) `behavior.luau` returns one table. These are the keys the engine reads from it; anything else on the table is the type's own. ### What the type's assets can do | Key | Shape | What the engine does with it | |---|---|---| | `ref` | `{ [name] = function(self, ...) }` | Every function becomes a method on every asset of the type: `ref:name(...)`. | | `modules` | `{ [name] = require(".x") }` | Code the type's assets reach with `asset.containing(__FILE__).modules.<name>`. | | `events` | an events schema | Events an asset fires. Readers subscribe through `ref.events.<name>:connect(...)`; the type fires them. | | `refShapes` | `{ [method] = function(self) -> (typeExpr, source?) }` | The result type of a `ref` method for one particular asset (below). | | `namePattern` | a Lua pattern | The names `asset.create` accepts for the type's assets. Default `^[A-Za-z][A-Za-z0-9_]*$`. | | `derive` | `{ output, module, compute, fingerprint, matches?, required?, timeout? }` | A file computed from the asset when it is committed; a `required` one holds the commit until it lands. | Some `ref` names mean the same for every type, and the engine calls them: - **`instantiate(self, target?, opts?) -> (root, idMap)`**: puts the asset in a scene. Defining it is what makes the type scene-instantiable. Its return is a contract (below). - **`inspect(self) -> detail`**: what `asset.inspect` reports for the asset beyond the common record (below). - **`preview(self, opts)`**: renders the asset's picture; it wins over the type's `preview:` recipe. - **`previewMaterial(self) -> { material }`**: the material a `surface` preview paints. - **`saveDefinition(self)`**: writes the asset's in-memory edits back to its files in edit mode. Some names are answered for every asset before the type is asked, so a `ref` entry of the same name is never reached: `getSource`, `getBytes`, `getText`, `exists`, `deps`, `canInstantiate`, `canPreview`, `preview` (which calls yours when you define one), `meta`, `runtime`, `events`, `typeRef`, `modules`, and the residency flags `has_backing_asset`, `has_runtime_changes`, `cpu_resident`, `gpu_resident`. ### When the engine calls the type | Hook | Signature | When it runs | |---|---|---| | `onCreate` | `(name, opts) -> { [path] = contents }` | On `asset.create`. Returns the files of the new asset, laid over the type's `template/`. Annotate `opts`: its type is the schema `asset.create` checks the caller's arguments against. A `""` key writes a single loose file. | | `onReplace` | `(dest, files) -> files` | On an `asset.create` over an asset already at `dest`, after `onCreate`, so what the author added can be carried into the replacement. | | `onRegister` | `(self)` | Once per asset, when it first registers: when the world loads, on a live `asset.create`, and when an asset arrives later (installed, pulled, synced). This is what makes an asset take effect the moment it is written. | | `onChange` | `(ref, change)` | On every write to a file inside an asset of the type. `change` is `{ path, asset, type, kind, origin }`, plus `settings` and `settingsChanged` for a write to the settings values file; `kind` is `edited` or `seeded`, `origin` is `local` or `remote`. Filter on `change.path`. Writes to one asset arrive in order, each after the hook for the one before has finished, and the hook may wait on what it reads. A write the hook makes inside its own asset arrives later like any other, so keep the hook convergent. | | `onDependencyChange` | `(ref, change)` | When a module the asset's code requires is re-run, or a name the asset carries starts resolving. `change.kind` is `dependency`. | | `onDelete` | `(ref)` | When an asset of the type leaves the world: deleted, or the world it is in is swapped away. | | `validate` | `(ref) -> { { code, message, severity?, path? } }` | On `asset.validate`, after the `type.yaml` checks, for the type's own rules. `severity` defaults to `error`. Runs on every push, so a type's rules hold at publish. A hook that fails reports `validate.hook_failed`. | ### Settings hooks | Hook | When it runs | |---|---| | `settingsDefaults(name, opts, asked) -> table` | Once per `asset.create`, for values the schema's defaults do not give. | | `settingsCorrections(values, name, opts) -> (corrections?, reasons?)` | On every settings write. A correction to a field the writer named refuses the write, giving the reason. | | `settingsDerivedDefaults(values, explicit, changed)` | On a settings write, for fields derived from others. | | `normalizeSettings(values, stored?)` | On every read and write, to map an earlier spelling of a field to the current one. | | `settingsHealed(values, stored)` | On a read, to repair stored values. | | `settingsSchemaProblem(schema, ref) -> string?` | When an asset's own schema is read; a returned string refuses the schema. | `creationInputs` (`{ [opt] = true | selectorOpt }`) names `asset.create` options that are inputs to the type rather than settings. ### Reloading An edit to `behavior.luau` reaches existing assets with no restart. ## How an asset is pictured (`preview:`) | `kind` | The picture is | The type provides | |---|---|---| | `instantiate` | the asset placed in the preview studio through its `instantiate` | `ref.instantiate` | | `image` | a file the asset holds, fitted to the frame | `source: { files }`, the candidate files in order | | `surface` | the asset painted on a mesh | `mesh`, and `ref.previewMaterial` | | `custom` | whatever `ref.preview` returns | `ref.preview` | ```yaml preview: kind: surface mesh: sphere ``` `angle: [yaw, pitch]` turns the camera. The studio owns the light, the backdrop and the framing, so an asset pictures the same in every world. A type with no `preview:` that defines `instantiate` still answers `ref:preview()`. A picture is rendered when something asks to view it (the editor showing the asset, `ref:preview()`), when previews are generated on request (`assets.generatePreviews`), and when the asset is staged. An edit alone renders nothing. The picture records what it was made from, so a stale one is told from a current one. ## The names your type's assets hold (`references:`) Where your type's own format or API carries the name of another asset, declare it here: ```yaml references: keys: # a top-level key of the type's files that holds a name, or a table of them - { key: "shader", type: "shader" } args: # an argument of a call, counting from 1 - { call: "g:node", position: 2, type: "procNode" } fields: # a field of the options table a call takes - { call: "fx.beam", field: "material", type: "material" } ``` `type` is the category the name resolves in. `asset.declareReferenceKey`, `asset.declareReferenceArg` and `asset.declareReferenceField` declare the same from a script. ## What search reads (`indexing:`) `indexing:` is how assets are found. Search reaches an asset only through what its type's `indexing:` names, and adds nothing of its own. That includes you: an asset indexed badly is one you cannot find later, when you are making something else and need it. A type whose assets are never looked for says `indexing: none`. ```yaml indexing: data: # text, read from the asset's files - role: identity extractor: verbatim source: { file: "README.md" } - role: interface extractor: symbols source: { files: ["init.luau"] } - role: implementation extractor: verbatim source: { files: ["init.luau"] } content: # the picture - role: identity modality: image source: { file: "preview.png" } facets: # what a query filters and re-ranks by file: ".metadata" rigged: { type: bool, from: { components: { contains: SkinnedModel } } } roughness: { type: number, filter: range, from: { file: "mat.yaml", field: "floats.roughness" } } ``` **Roles.** Each `data` and `content` entry has a `role`, and a query matches in two slots: - **`identity`**: what an asset is. For anything you look at, the picture; for anything else, the text that says what it is. - **`capability`**: what it does and how it is made. `interface` (the signatures or shape a caller uses) and `implementation` (the body) both count as capability, and a type with code usually declares both. Ask what a person would recognise an asset of the type by, and what it does, and point each role at the file that says it. For text, that is the asset's description: the file your template starts with a `[[describe]]` block, which the author writes or `services describe` fills in (see "Ask your assets to say what they are"). **`data`.** `extractor: verbatim` embeds a file's text as it is; `symbols` embeds the declared signatures of code. `source` is `{ file }` or `{ files: [...] }`. Never index a file name (`source: { field: name }`): one or two words carry nothing to match. **`content`.** `modality: image` embeds the picture itself, so a text query matches what the asset looks like. A type whose assets are looked at makes the picture its identity. **`facets`.** What a query narrows and re-ranks the matches by. `file` is embedded whole, so keys nobody declared in it are still found. Each further key is computed for every asset and states a value for every one, including `false`: a file can imply "not rigged" but never say it, and a query separates rigged from unrigged only because the unrigged ones say `rigged: false`. A key is `{ type: bool | number | enum, filter?: range, from }`, where `from` is `{ file, field }` (a field of one of the asset's files, dotted for nesting), `{ metadata: key }`, or `{ components: { contains | any_outside } }` (what the asset's entities carry). ## What blocks a push A push checks every asset it carries against its type. These refuse it: - a required file that is missing, a `content` check that fails, a `described` file not written yet; - an error from the type's `validate`. Unlisted files and warnings do not. A `described` file blocks only a push that changes the asset. When a push is refused, the message names each asset and what it lacks. `world.publishBlockers()` and `zm status` read the same list without pushing. ## Typing a result from the asset (`refShapes`) A `ref` method whose result depends on the asset (one entry per child folder, per row of a config, per control a map declares) can only be annotated as `{ [string]: Thing }`, which accepts any key. `refShapes` states the result for each asset instead: a function returning a Luau type expression for that asset, and the module whose types the expression uses. Read the asset; never run it. ```lua -- inputMap.assetType/behavior.luau M.refShapes = { activate = function(self): (string, string) local names = {} for _, control in ipairs(M.ref.controls(self)) do table.insert(names, control.name .. ": Handle") end if #names == 0 then return "", "" end return "{ " .. table.concat(names, ", ") .. " }", "@builtin::modules.zinput.scheme" end, } ``` With it, `map.jump:onPressed(fn)` is checked and `map.noexisting` is reported. A per-asset type applies where the call site names which asset: a component field whose default names it, or an annotation `AssetRef<"inputMap", "<identity>">`. `asset.resolve(name, category)` carries only the category, and a name computed at runtime carries nothing, so calls on those keep the declared return. The type belongs to the call's result: index it there, or bind what you need from it there, and the names stay checked. `require("@builtin::assetTypes.assetType.shared.refShapes").published()` shows what was published: `categories` (each type's method surface) and `returns` (per-asset results by identity, then method). An identity missing from `returns` was never published. Results are recomputed when an asset is written; at most 64 assets of one type are read. ## Putting an asset in a scene (`ref.instantiate`) A caller writes one piece of code against every instantiable type, so what `instantiate` returns is fixed: ```lua local Instantiable = require("@builtin::assetTypes.assetType.shared.instantiable") M.ref = { instantiate = function(self, target, opts) local root = Instantiable.root(self, target, opts) -- compose the asset under `root`, now return Instantiable.result(self, root, idMap) end, } ``` **In.** `target` is the entity the asset lands under, or onto for a hierarchy type; with none, the type spawns a new root. `position`, `rotation` (three numbers in degrees, or a quaternion), `scale`, `name` and `temporary` mean the same for every type: `Instantiable.root` applies them to a root you make, `Instantiable.place` to one you adopt. Document any options of your own in the hook's `--!arg` docs. **Out.** `(root, idMap)`. `root` is the composed root, live when you return: build synchronously, never defer to a component's `awake`. `idMap` maps each original id to the spawned one, so a component that composes the asset again on every load can pass it back in and keep references into the composition. Every call goes through `Instantiable.result`, which refuses a root that is not live and turns a missing `idMap` into `{}`. ## Inspecting an asset (`ref.inspect`) `asset.inspect(ref)` builds a record every asset shares (`identity`, `name`, `guid`, `source`, `typeName`, `typeDefinitionPath`, `scope`, `origin`, `description`, `tags`), then calls `ref.inspect(self)` for the type's own `detail`: ```lua M.ref = { inspect = function(self) -- read the asset's own files, never runtime state: inspect works on an asset -- that has not been compiled, uploaded or registered return { --[[ what makes this asset what it is ]] } end, } ``` Without it, the record is the shared part alone, and an agent inspecting the asset learns nothing of what it is. A hook that raises leaves `detail` empty and sets `record.warning`. ## Discovery - `asset.list("assetType")`: every registered type. - `asset.inspect("<typename>")`: the type, its README and its `about.yaml` texts. - `asset.resolve("<typename>", "assetType")`: the type itself.
▲ 0↑ born
▣
module · born here
❒asset
# assetType runtime The machinery that reads a `<typename>.assetType/behavior.luau` and turns its declarations into live behaviour. A `behavior.luau` is a table of declarations — `ref` methods, `modules` shared code, an `events` schema, a `namePattern`, `refShapes`, and the `onCreate` / `onRegister` / `onChange` / `onDelete` / `validate` / `settingsDefaults` / `settingsCorrections` hooks. None of it runs itself. This is the code that runs it, and it lives here because reading a type's declarations is the **assetType type's own behaviour** — the same way `material.assetType` owns what a `.material` does. ## Sub-modules | Module | Reads | Responsibility | |---|---|---| | `ref.module` | `ref`, `modules` | Builds every `AssetRef` envelope, attaches the shared metatable, and dispatches per-type methods and shared modules onto it. Also owns edit-mode write-behind persistence. | | `create.module` | `onCreate`, `namePattern`, `validate` | Backs `asset.create`: resolves the type, checks the name against its pattern, runs `onCreate` (or clones `template/`), and writes the instance. `validate.module` beside it checks a creation `opts` table against the type's `createSchema`. Before running `onCreate`, resolves the type's settings chain (below) and hands the result to the hook as `opts.settings`. | | `settings.module` | `settings`, `settingsDefaults`, `settingsCorrections` | A type's declared settings schema and where its values live (`type.yaml`'s `settings:` block). `Settings.resolveForCreate` layers the schema's own defaults, the type's own `settingsDefaults(name, opts, asked)` hook (a DEFAULT the schema can't express — a name-derived convention, a fact read off a payload the caller handed it, a value following a field `asked` shows a higher layer naming; any later layer overrides it), the Preset Manager, an importer's settings, the caller's `settings` table, then the type's own `settingsCorrections(values, name, opts)` hook (a CROSS-FIELD CONSTRAINT the schema can't express, applied last over the fully merged values). A correction over a default/preset/importer value lands silently; a correction that would override what the caller's own `settings` table explicitly asked for refuses the creation instead, naming the field and why. Neither hook is ever handed a table to mutate; each returns what it wants changed (`settingsCorrections` may also return a `{ [field]: reason }` table for that refusal message). `Settings.cloneValues` deep-copies a values table — `create.module` hands `onCreate` a copy, never the table it stamps. `Settings.valuesOf` / `writeValues` read and write an asset's own values file. | | `typeYaml.module` | `type.yaml` | The folder a type lives in and its parsed `type.yaml`, decoded once per content version of the file. `settings.module` and `inspector.module` read their blocks through it. `about` / `aboutAt` read a type's `about.yaml` (`intent`, `function`, `usage`), leaving out any key that is empty or still starts with `[[describe]]`; `aboutRows` and `aboutMarkdown` lay the texts out for the Inspector and the `types/<name>` guide. | | `inspector.module` | `type.yaml`'s `inspector:` block | Which inspector a type declares for its assets (`inspector: { type: ... }` or `{ instance: ... }`), and the declaration that file returns — the sections it adds, the generic ones it replaces, and their order — or the problem that kept it from loading. | | `onRegister.module` | `onRegister` | Fires an instance's once-only registration hook — on arrival, on world load, and for `@builtin` library instances. | | `changeDispatch.module` | `onChange`, `onDelete`, `refShapes` | Routes a VFS source write or a folder delete to the enclosing typed asset's type hooks. | | `refShapes.module` | `refShapes`, `ref` | Publishes what every `AssetRef<category>` answers to, so a member read on an asset-typed value is checked against that category's real surface. | | `events.module` | `events` | The per-asset event runtime behind `ref.events`. | | `instantiable.module` | `ref.instantiate` | The instantiation contract an asset type opts into: `root` stands the root entity, `place` applies the base placement opts to one the type adopted, and `result` shapes the `(root, idMap)` every `instantiate` returns. Also registers the `sceneInstantiable` field-constraint validator. | | `declaration.module` | `type.yaml` | The type's decoded declaration, read once and held until a write inside an `.assetType` folder; what every question about a type as a whole reads. | | `previewRecipe.module` | `type.yaml` `preview:` | How an instance's `preview.png` is produced: which of the four recipes (`instantiate`, `image`, `surface`, `custom`) the type declares, and what that recipe needs. | ## Reaching it ```luau local rt = require("@builtin::assetTypes.assetType.shared") rt.ref.loadTypeBehavior("material") ``` Fields resolve lazily. The prelude requires the sub-modules directly, in dependency order (`ref`, then `changeDispatch`, `onRegister.install()`, `refShapes.install()`) — a table that required all six on load would take that ordering away from it.
▲ 0↑ born
▣
module · born here
❒asset
# edui.inspector The Inspector as an ordered list of **sections**. A subject — an asset, or a component on an entity — gets generic sections, merged with the sections its declarer's `inspector.luau` adds or replaces, in the order that file names. ```luau local Inspector = require("@builtin::editor.edui.inspector") local sections, ctx = Inspector.assetSections(ref, asset.inspect(ref)) local nodes = Inspector.render(sections, ctx) -- section cards local nodes = Inspector.renderAsset(guid) -- the same, from an asset id local sections, ctx = Inspector.componentSections(entityId, "Camera") local nodes = Inspector.render(sections, ctx, { nested = true }) -- a component card's body ``` ## Sections A section is `{ id, title, icon?, open?, build(ctx) -> { node } }`. The generic asset sections, in default order, are `identity`, `problems` (present only when `asset.validate` reports any), `tags`, `move`, `settings`, `preview` and `operations` (see `assetSections.module`). A type declares its own in the file its `type.yaml` names: ```yaml inspector: { type: "inspector.luau" } ``` That file returns `{ sections?, replace?, order? }`: sections it adds (placed before `operations`), generic sections it replaces by id, and the ids to put first. `material.assetType/inspector.luau` is a worked example, and `@builtin::assetTypes.assetType.shared.inspector` documents the declaration. A component on an entity has one generic section, `settings`: its public fields as typed controls over the live component, three-number colour and vector aliases as one grouped control, each edit checked against the schema and written as one undoable operation. A component that ships an `inspector.luau` beside its `init.luau` (named by `component.assetType`'s `inspector: { instance: "inspector.luau" }`) adds, replaces and orders sections of its card the same way; its sections read `ctx.component` and `ctx.selection.id`. `SceneModule.component/inspector.luau` is a worked example. A declaration that cannot be read, or that names a section that is not there, shows its problem as a first `inspector-problem` section while every other section still renders. Every build runs through `Inspector.buildSection(section, ctx) -> (rows, problem?)`: a build that raises, or returns anything but a list, shows its error inside that section alone. ## The Context Every `build(ctx)` receives one Context, made by `Inspector.valuesContext`: | Field | What it is | |---|---| | `ref` | the inspected asset (on an entity, the component asset) | | `info` | `asset.inspect(ref)` | | `schema` | `asset.schema(ref)`, `settingsOf` resolved | | `schemaProblem` | why a declared schema did not resolve | | `settings` | the current values | | `setSettings(patch)` | checks the patch with `Field.checkSchema`, then writes it as one undoable operation named for the field; answers `(ok, violations)` | | `rejected` | field path -> the message of its last rejected edit, for this subject only | | `selection` | `{ scope = "asset" \| "entity", id, component?, name? }`; on an entity, `component` is the component's identity and `name` the name the entity lists it by | | `component` | the live component proxy (entity scope) | | `nameOf(id)` | the name an entity-reference field shows for an entity id (entity scope) | | `widgets` | the edui framework table (`field`, `schemaField`, `section`, `button`, `text`, `vbox`, `hbox`, ...) | | `keyPrefix` | the callback-key namespace for this subject | | `refresh()` | rebuild the Inspector after a write that moves no revision | | `actions` | when set, the ids of the Settings actions offered (`{ reset = true }`); nil offers every action that applies | | `parts` | the building blocks a section composes: facts, lists, tables, asset and entity links, actions, a file opener, problems, swatches, a content-versioned cache, an lsp check and typed values (`parts.module`) | `Inspector.valuesContext{ subject, schema?, schemaProblem?, values?, write, ref?, keyPrefix?, info?, selection, component?, nameOf?, actions? }` is the one way to make a Context: `write(patch)` performs a patch already checked against the schema. ## The rest of the API - `Inspector.mergeSections(generic, decl, problem, file)` — the merge and order. - `Inspector.componentSections(entityId, componentName)` — a component card's sections and Context; `Inspector.componentSettingsRows(ctx)` is its generic `settings` section's body. - `Inspector.componentValuesSignature(entityId, componentName)` — text that moves whenever one of the component's declared fields holds a different value (an edit, an undo, a script's write); a panel folds it into its build signature. - `Inspector.typeSections(ref)` — the sections `ref`'s type declares, plus Settings when it has values; what the inline editor under an asset chip shows. No other generic section is built for it, so it runs no validation. Nil when the type declares no `type:` inspector. - `Inspector.render(sections, ctx, { nested = true })` — titled groups inside a card, for the inline editor. - `Inspector.signature(assetId)` — text that moves whenever what the asset view shows can have moved: the asset folder's content version (the change dispatcher moves it after a write inside the asset reaches its type's hook — an edit, an undo or redo, a peer's write) and the settings values file's. A panel folds it into its build signature; `edui.widgets.openEditorsSignature()` is the same for every open inline editor. - `Inspector.buildSection(section, ctx)` — runs one section's build and judges it: `(rows, nil)`, or one error row and the problem text. - `settingsSection.fields(ctx)` — the field rows of the whole schema without the actions beneath them. - `settingsSection.fieldRows(ctx, fields)` / `settingsSection.actionRow(ctx)` — the two halves of `settingsSection.build`, for a section that shows part of a schema and acts on all of it. - The Context, Section and Declaration shapes are exported as types: `Inspector.Context`, `Inspector.Section`, `Inspector.Declaration`. - `Inspector.release(keyPrefix)` — forget the rejections, section disclosures and parts state (action failures, file checks, and cached values no other open Context read) kept under a Context's key prefix and the prefixes nested in it; a closed inline editor calls it for its own. - `Inspector.epoch()` — moves on every disclosure, rejection and write the Inspector records; a panel folds it into its build signature. - `Inspector.settingsSection` — the Settings section (`settingsSection.module`). - `@builtin::editor.edui.inspector.presetActions` — the Settings section's Save as preset / Apply preset… actions, and `presetsFor(declarer)`, the presets whose target is a declarer. `preset.assetType/inspector.luau` is the preset's own view: its target and its values edited through the target's schema.
▲ 0↑ born
▣
module · born here
❒asset
# luau_introspect (module) Parses Luau/asset source TEXT into structured declarations. Pure string/pattern parsing (`string.find` / `string.match` / `string.gmatch`) over the literal source — no compiling, no VM spawn, no runtime state, no engine FFI. Given source text, it extracts what is written in the file. This is the shared parser every per-assetType `M.ref.inspect` hook uses to turn a component/module/tool's own source into the structured record `asset.inspect` returns. ## Exports - `docstrings(src) -> DocMap` — scans `--!desc` / `--!arg` / `--!return` / `--!example` comment runs and binds each run to the name of the declaration on the next non-comment line (the identifier after `function`, `public:`, `local function`, or `M.`). - `publicFields(src) -> { FieldEntry }` — parses `public = { name = Field.<kind>(default, mode), ... }` table-literal entries and module-scope `public.<name> = Field.<kind>(...)` assignments. - `events(src) -> { EventEntry }` — parses `events = { name = Event(payloadSchema?, syncMode?), ... }` table-literal entries. - `methods(src) -> { MethodEntry }` — parses `function public:<name>(...)` / `typed function public:<name>(...)` declarations (params + optional return type). - `lifecycleHooks(src, catalog) -> { string }` — top-level `function <name>(` declarations whose name is in the caller-supplied `catalog` array. - `moduleExports(src) -> { ExportEntry }` — parses `M.<name> = function` assignments, `function M.<name>(...)` declarations, and a trailing `return { foo = foo, ... }` export table. - `forSource(src, computeFn) -> any` — memoises `computeFn(src)` keyed on `src` itself in a module-local table. The same source text returns the cached result without re-running `computeFn`; different source text recomputes. Keyed on the source content (not an asset checksum) because composite/container assets (component folders, scene folders, etc.) all hash to the empty-string checksum — a checksum-keyed cache collapses every such asset's detail onto whichever one was inspected first. ## Usage ```luau local Introspect = require("modules.luau_introspect") local src = self:getInitScript() local detail = Introspect.forSource(src, function(s) return { fields = Introspect.publicFields(s), events = Introspect.events(s), methods = Introspect.methods(s), hooks = Introspect.lifecycleHooks(s, lifecycleCatalog), } end) ``` ## Notes - Every function is a pure string→table transform: same source text in, same structured table out, every time. No reads of live component state, no entity/world queries. - Structural scanning runs over a comment- and string-aware **mask** of the source (a same-length copy where comment bodies and string-literal contents are blanked to spaces, delimiters and newlines preserved). Pattern matches and brace/paren balancing run on the mask — so a brace, `Field.`, `Event(`, or a whole entry that appears inside a comment or a string literal never registers — while captured values are sliced from the original source at the same (aligned) indices. This makes the parser robust to apostrophes in comments, commented-out entries, string defaults containing `}` / `Field.` / `Event(`, and `[[ ]]` long strings. - `default` / `category` are raw trimmed source-text slices (with any trailing comment stripped), not evaluated values. - For a **ref constructor** (`Field.assetRef` / `dataRef` / `resource` / `componentRef`) the FIRST positional argument is the category / contract / componentType selector, captured under `category`; the SECOND argument is captured under `default`. - For every **other** Field kind the first argument is the `default` and `category` is nil. - A trailing `Sync` / `NoSync` identifier is captured as `sync`, tolerating a trailing comma or a trailing comment after the last argument. - Field/Event entries whose key is a computed or indirect expression (`[expr] = Field.number(...)`) are omitted — only literal identifier keys are recognised. - `methods` captures a `...` variadic parameter (as `name = "..."`), with its `: <type>` annotation when present. - A `--!desc` written above a field/event declaration (`<name> = Field.<kind>(...)` / `<name> = Event(...)`) or a `public.<name> =` assignment binds to that name in `docstrings`, and is folded into the corresponding `publicFields` / `events` entry's `desc`. - `lifecycleHooks` never hardcodes the lifecycle-callback catalog; the caller passes the list of names to match against. - `forSource`'s memo is bounded (oldest-key eviction) so a long session touching many distinct asset versions can't grow it without limit.
▲ 0↑ born
▣
module · born here
❒asset
# assetType.shared.ref Builds the metatable every `AssetRef` (the `{ __ref, type, name, guid, identity, path }` envelope returned by `asset.resolve` / `asset.ref`) carries. Replaces the per-call C metatable that used to live in `crates/zero_scripting/src/ffi/bindings/asset.rs::attach_asset_ref_metatable`. ## Public API ```lua local assetRef = require("@builtin::assetTypes.assetType.shared.ref") -- Called by the Rust factory (push_asset_ref_handle) via -- _G.__build_asset_ref_proxy after the envelope fields are set. assetRef.build(envelope) -- attaches AssetRefMT, returns the table ``` The module exposes no invalidation surface — discovery is registry-driven and hot-reload is transparent (see "Discovery and hot-reload" below). ## Method dispatch order `ref.foo` is resolved in this order: 1. **Default methods** — `getSource` / `getBytes` / `getText` / `exists` / `inspect` and the lazy `meta` property. Per-type definitions cannot override these (engine contract from gh#1889). 2. **Per-type `ref` table** — discovered through `asset.resolve(<typename>, "assetType")` + `require(<identity>.behavior)`. The lookup resolves to whichever `<typename>.assetType/` folder is currently registered for the typename (built-in, user, or library-vendored) and pulls its `ref` methods. 3. **Nil** — unknown key, same shape as the original C metatable. ## Adding methods for a new asset type Drop a `behavior.luau` into the type folder: ``` src/lua/lib/assetTypes/<typename>.assetType/ ├── type.yaml -- structural spec (existing) ├── behavior.luau -- ref + global behaviour (new) └── template/ -- placeholder body (existing) ``` `behavior.luau` returns: ```lua return { ref = { --!desc Per-instance method on every `<typename>` AssetRef. myMethod = function(self, ...) ... end, }, global = { -- Reserved for the asset.<typename>.* surface — not consumed -- yet; included so the contract from gh#1889 lands cleanly. }, } ``` Within `ref` methods, `self` is the AssetRef envelope: `self.path`, `self.identity`, `self.guid`, `self.type`, `self.name` are available. Engine-required fields (`guid`, `path`, `identity`, `type`) must not be redefined. ## Discovery and hot-reload Type discovery uses the asset registry, so it doesn't matter where a `<typename>.assetType/` folder lives — engine built-ins under `@builtin::assetTypes.<X>`, user types dropped under `/zero/source/<X>.assetType/`, or types vendored inside an imported library all resolve identically. The dispatcher walks `asset.resolve(<typename>, "assetType")` → canonical identity → `require <identity>.behavior` on every miss; the asset registry is the cache for the resolve half and Luau's `_LOADED` is the cache for the require half. Hot-reload is transparent. When a `<typename>.assetType/behavior.luau` is rewritten through VFS, the engine's `invalidate_require_cache_for_state` re-runs the module and mutates the cached `_LOADED[<identity>.behavior]` table in place. Dispatch reads `mod.ref` on every access (rather than caching a sub-pointer), so existing AssetRefs see the new methods on the very next access — no Rust-side hook into this module is needed, and no invalidation API is exposed for callers to call. The same registry-driven path also handles type **registration** correctness: dropping a new `<typename>.assetType/behavior.luau` updates the asset registry, the next `asset.resolve(<typename>, "assetType")` returns the new ref, and AssetRefs of that type immediately gain the new methods. ## Why Luau, not Rust The asset surface needed per-category behaviour (`material:getProperties()`, `bundle:instantiate(entityId)`, `tool:run(args)`) and the old shape couldn't grow without an FFI change per method. Owning the proxy in Luau means: - Type-specific methods ship as content (the `<typename>.assetType/` folder), not engine code. - Adding a new asset type drops in a new folder; no Rust rebuild. - Methods can call any other Luau global (`vfs`, `asset`, `Material`, `entity`, etc.) directly, instead of going through narrow FFI primitives. ## Consumers - `crates/zero_scripting/src/ffi/bindings/asset.rs::attach_asset_ref_metatable` — the Rust factory that pushes envelopes invokes `_G.__build_asset_ref_proxy` once per push. - Every Luau call site of `asset.resolve` / `asset.ref` / `entity(id).component.X.material` / any binding declared `AssetRef<...>` — they all receive envelopes built through this module.
▲ 0↑ born
▣
module · born here
❒asset
# yaml.module YAML decode + encode for authored engine content. Pure Luau, no engine dependencies — a general parsing library, not data-system plumbing. ```luau local Yaml = require("@builtin::modules.yaml") local doc = Yaml.decode(vfs.read(path)) vfs.write(path, Yaml.encode(doc)) ``` ## Supported subset - Block mappings (`key: value`) and block sequences (`- item`), nested to any depth. - Compact sequence-of-mapping entries (`- path: x` / ` kind: y`). - Flow collections — `{ a: 1, b: 2 }` and `[1, 2, 3]` — single line. - Plain scalars with type inference: `~` / `null` → nil, `true` / `false` → boolean, numeric literals → number, everything else → string. - Single- and double-quoted strings (`''` escapes a literal quote inside a single-quoted string; `\n` `\t` `\r` `\\` `\"` inside a double-quoted one). A quote opens a quoted scalar where a scalar begins — after `key:`, after a `- ` entry marker, or inside a flow collection — so a plain scalar carries an apostrophe as data (`note: the world's rules`). Quoted keys are read in flow mappings. - `#` comments — honored outside quotes, so a `#` inside a quoted string is kept as data. - Literal (`|`) and folded (`>`) block scalars, with a chomping indicator (`-` strips the final newline, `+` keeps every trailing blank line, none keeps one newline) and an indentation indicator (`1`-`9`: the content's indent past the parent's), in either order (`|-`, `>+`, `|2`, `>1-`). A block scalar's content is literal text: quotes (balanced or not), `#`, `key: value` and `---` inside it are data. - An optional leading `---` document marker. ## Loud-error contract Constructs outside the subset above raise instead of misparsing: anchors/aliases (`&`, `*`), tags (`!`), directives (`%`), multi-document streams (a second `---`), a block-scalar header it cannot read (`|x`, `|-+`, `|0`), tab indentation, and inconsistent indentation (both block structure and block-scalar bodies). Every error carries the offending line number (`yaml: line N: ...`), so a bad config points straight at the line to fix. Tab indentation is rejected everywhere — including block-scalar body lines whose leading whitespace contains a tab. A tab after the first non-space character of a line is content and passes through. ## API - `Yaml.decode(text: string): any` — decode a YAML document into a Luau value (table, scalar, or nil for an empty document). Raises on malformed input or an unsupported construct. - `Yaml.decodeWithComments(text: string): (any, boolean)` — decode as `decode` does, and report whether the text carries a comment by the decoder's own rule: a `#` at a line's start or after whitespace, outside a quoted scalar and outside a block scalar. Re-encoding the value drops such comments, so an editor that writes a document back reads this first. - `Yaml.encode(value: table): string` — encode a Luau table as YAML (block style, two-space indent, alphabetically sorted keys). Raises on values YAML can't represent (functions, userdata, non-string mapping keys). A top-level empty table encodes to an empty document, which decodes back to `nil` (the YAML empty-document ambiguity).
▲ 0↑ born
▣
module · born here
❒asset
# json JSON encode/decode library for Luau. Encodes Lua values to JSON strings and decodes JSON strings back to Lua values. Used for communication with the Rust side of the engine, the VFS read/write bridge, and any wire-format that needs JSON. Pure Luau, no engine dependencies. Compact and pretty-printed encoders, plus a hand-rolled decoder that streams the input by position so it works under WASM as well as native. ## Exports - `Json.encode(value: any, indent?: string, currentIndent?: string) -> string` — compact encode. Functions / unknown types and NaN/Inf encode as `null`. - `Json.encodePretty(value: any, indentStr?: string) -> string` — pretty-printed encode with sorted object keys (diff-friendly). - `Json.encodeArgs(...: any) -> string` — encode varargs as a JSON array. - `Json.decode(str: string) -> any` — decode a JSON string. Returns the decoded value, or `nil` + error message on failure. ## Usage ```luau local Json = require("@builtin::modules.json") local widget = { type = "button", text = "Click Me" } local compact = Json.encode(widget) -- '{"text":"Click Me","type":"button"}' local pretty = Json.encodePretty(widget, " ") local decoded = Json.decode(compact) local v, err = Json.decode("oops") -- v = nil, err = error message ``` ## Notes - Object keys are sorted alphabetically in both encoders for consistent output across runs. - Numeric keys on objects are stringified at encode time (JSON has no numeric keys). Pure-integer key sets get detected as arrays via `isArray` and encoded with brackets. - NaN, +Inf, -Inf encode as `null` — JSON has no representation. Round trips through `decode` recover `null` (Lua `nil`), so they don't preserve. - Unicode `\uXXXX` escapes decode to UTF-8 by hand to stay WASM-safe. Only the BMP is covered; supplementary planes via surrogate pairs are not. - Functions encode as `null`. - Decode is character-streamed — no regex, no `string.match` patterns on the whole input — so the line-and-column information needs to be reconstructed from the position offset.
▲ 0↑ born
backing path · editor/edui.package/inspector.module/settingsSection.module

Problems

Everything affecting this asset right now: its own problems, anything wrong inside it, and problems on its direct dependencies.

0problems
No problems reported on this asset or on the parts this page shows. Parts it leaves out are not counted here.
⌬ZeroMind agent review · awaiting first pass
Findings
Reviewer findings (handle · model · tag · quoted note) appear here once the per-pass review log lands. Today only the rolled-up agent_score is exposed.
usability—
did it work as advertised
quality—
authoring polish + cohesion
performance—
frame & memory budget held
agent review score
—
/ 100
awaiting first pass
usability × 0.40
+ quality × 0.35
+ performance × 0.25
± compat factor

Usability ratings

Did the part work as advertised when consumers tried to drop it in. Separate from upvotes: those are taste; this is "did it function".

—%no reports yet
Sign in to report whether this part worked for you.
Discussion

Scoped to this part · feeds back into the world's score.

0comments
Sign in to post.sign in
No comments yet. Be the first.