Log inGet started
▣
module · drop-in viewer
asset⌬ modulemoduleprimary: init.luau·originates fromworld 07158574-5…

xr_guide

The headset's controls guide: a panel an arm's length away, turned to the person's left so the world ahead stays clear, that says how to do the basic things with the hand controllers they hold.

by◐lumi·posted 7d ago
What it does

xr_guide

The headset's controls guide: a panel an arm's length away, turned to the person's left so the world ahead stays clear, that says how to do the basic things with the hand controllers they hold.

LineShownNamed from
Movewhile a live control move binds the padZin.scheme.legend("move", "gamepad")
Turnwhile a live control look binds the padZin.scheme.legend("look", "gamepad")
Up and downeditingZin.scheme.legend("flyVerticalHeadset", "gamepad")
Point and selectalwaysthe pointing hand's trigger, Zin.gamepad.label
Grab and moveeditingthe pointing hand's grip, Zin.gamepad.label
Show or hide the editorin the editorthe menu button, Zin.gamepad.label("start")
Open the menuoutside the editor, while the pause action binds the padZin.scheme.legend("menu", "gamepad")
Talk to the agenteditingedui.voicePrompt.talkControl(), and the talk gesture
Open worldsthe editor's dock, or the menu's ZeroMind tabthe dock's world button, or the pause action

The hand controllers present as one pad while a headset session holds input focus, so a control's gamepad bindings are what the controllers press, and Zin.gamepad names each pad button by the name printed on the controllers (X, A, Right grip, Left thumbstick, Menu button). A line whose control answers to nothing on the controllers is left out, so the guide states only what works where the person is.

It opens the first time a headset session holds input focus while the client setting Show the controls on entering VR (xr.guide) is on; its own button turns that setting off. Controls in the VR settings (xr.controls), the Controls row of the editor's dock and the Scene's hint in a headset open it again. It follows the mode, the pointing hand and the live controls while it shows, and goes when the headset gives up focus.

local Guide = require("@builtin::modules.api.engine.xr_guide")
Guide.open()            -- in a headset
for _, row in Guide.rows() do print(row.action, row.control) end

Interface

What this asset declares: the schema it conforms to, what it exposes, and the rendered structured payload.

conforms to

zero/source-extract/v2

module xr_guide The headset's controls guide: a panel beside the person's view that says how to do the basic things with the hand controllers they hold — move, turn, point and select, grab, open the menu (or, editing, show the editor's dock), talk to the agent and open worlds. Each line names its control from where the control is read: a live control's bindings for the pad the hand controllers present as (`Zin.scheme.legend`), the controllers' own button names (`Zin.gamepad.label`) for the laser's trigger and grip and the menu button, and the editor's push to talk (`edui.voicePrompt.talkControl`). A line whose control answers to nothing here is left out. It opens the first time a headset session holds input focus while the client setting `xr.guide` is on, and on demand from the VR settings (`xr.controls`), the editor's dock and the Scene's hint.

xrApi( ) → any

focused( ) → boolean

editing( ) → boolean

Whether the editor is editing: the dock, the laser's grab and push to talk answer then.

pointingSide( ) → string

The hand the laser points with: `"left"` or `"right"`.

talkControl( ) → string

The editor's push to talk control on this device, when the editor runs.

rows( ) →

The guide's lines as they stand now: `{ action, control }`, each in the person's language. The controls are named for the hand controllers' pad, read from the live controls and the controllers' button names.

add(actionKey: string, control: string?) → void

argtypedescription
actionKeystring
controlstring?

L(text: string, style: { [string]: any }?, wrap: boolean?) → void

argtypedescription
textstring
style{ [string]: any }?
wrapboolean?

V(style: { [string]: any }, children: { any }?, extra: { [string]: any }?) → void

argtypedescription
style{ [string]: any }
children{ any }?
extra{ [string]: any }?

H(style: { [string]: any }, children: { any }?, extra: { [string]: any }?) → void

argtypedescription
style{ [string]: any }
children{ any }?
extra{ [string]: any }?

button(text: string, callback: string, primary: boolean) → void

argtypedescription
textstring
callbackstring
primaryboolean

build(rows: { Row }) →

The guide's widget tree for a list of lines.

argtypedescription
rows{ Row }The lines, as `rows()` gives them.

onCallback(id: string, _data: any) → void

argtypedescription
idstring
_dataany

signature(rows: { Row }) → string

argtypedescription
rows{ Row }

open( ) → boolean

Show the guide in front of the person. It stands only in a headset; outside one it does nothing and answers false.

close( ) → void

Take the guide down.

isOpen( ) → boolean

Whether the guide is shown.

update( ) → void

Keep the guide current: its lines follow the mode, the pointing hand and the live controls, and it goes when the headset gives up focus. Called by `xr_menu`'s loop.

entered( ) → void

What entering a headset does: the guide opens when the client setting `xr.guide` is on.

⌬ Types
Row = { action: string, control: string }

Sub-parts

Everything contained inside this part. Assets are composite children (clickable cards). Files are leaf payloads. Expand any row to view its source.

Showing up to 3 levels deep. Open a part to see what it holds further down.

47+items
·
assettype · born here
❒asset
# Module (asset type) A module is a reusable, stateless (or globally-stateful) Luau library that other code pulls in with `require()`. Modules are the unit of factored-out logic in a world: helpers, math libraries, format parsers, registries, shared algorithms. ## When to use one - You have logic you want to share across multiple components, services, scenes, or tools. - You have a registry, lookup table, or shared cache that callers all read from / write to. - You want a stable API surface (`M.fn`) other code can depend on. If the logic is bound to one entity, use a `.component`. If you want a named UI of fields rather than functions, use a `.preset`. ## Where it lives - Source: `/zero/source/.../<name>.module/` - Identity: the source path with `/` written as `.` and each segment's type suffix dropped — `/zero/source/demo/beats.module` is `demo.beats`, and `/zero/source/kit.package/beats.module` is `kit.beats`, the container's name kept and its `.package` suffix gone. `asset.create` returns this string, `asset.resolve(...).identity` reads it back, and the `require` forms below write it as `<identity>`. - Folder shape: - `init.luau` (or `init.lua`) — module body. **Required.** Returns a table (conventionally named `M`). - `README.md` — instance-level documentation. **Required.** - `.metadata` — agent-editable tags + free-form fields. **Required.** ## How to create one ```luau asset.create("module", "<name>") -- Creates: /zero/source/<name>.module/ -- init.luau (canonical `local M = {} … return M`) -- README.md (instance README template) -- `folder` places it in a subfolder of /source, and that subfolder -- leads the identity: `{ folder = "lib" }` produces `lib.<name>`. -- `into` authors it inside a resolved container (a package, a toolbox), -- whose own identity leads the same way: asset.create("module", "<name>", { folder = "lib" }) asset.create("module", "<name>", { into = asset.resolve("myPkg.package") }) ``` ## How it operates 1. **Registration.** Writing `init.luau` into a `.module/` folder indexes the asset and registers the module path with the resolver. 2. **Loading.** The first `require("<identity>")` runs the file's body and caches the returned table. Subsequent requires from anywhere return the **same table** — this is the shared-state lever for "module-local" registries. The body runs in an environment of the module's own: a name it declares without `local` is readable by the module's own functions and by no other script, so an export reaches its callers through the returned table and nothing else. Requiring a component's folder runs its chunk the same way, once, and its `update`, `start` and `public` stay in that environment; a component runs on an entity through `entity(id).component.add(name)`. 3. **Hot reload.** Editing the file re-runs the module body and folds what it returns into the table already loaded, so that table keeps its identity: a caller that captured it with `require` reads the new source's functions and values through the reference it already holds, and a later `require` returns that same table. A key the new source drops goes away; a key something set at runtime stays. The body's own `local`s start again from their initial values, so state that must outlive an edit lives in `modules.state()` (`guides { path: "core/scripting-and-tasks" }`). 4. **Identity resolution.** A module is reached by its `<identity>`, and where the caller lives decides which spelling of it resolves. For a module in a **world**, from a caller in that same world — another module, a component, a scene entrypoint, or an `execute` chunk: - `require("<identity>")` — the identity on its own, resolved against the caller's own root. It carries every folder segment, so a module created with `{ folder = "demo" }` is `require("demo.beats")`. - `require("@root::<identity>")` — the same root-relative resolution, written out. - `require(".sibling")` — a module in the same folder, by its bare name; `..name` steps up one folder, `...name` two. Logs, stack traces and hot-reload notices name that same module `@local.source.<identity>` — its key under the world source root. The `<identity>` tail of that key is the form above, so a trace reading `@local.source.demo.beats` is `require("demo.beats")`. For a module in a **library** — content under `/zero/source/libs/@<lib>/` — `@<lib>::` addresses that library's root from anywhere: `require("@builtin::modules.transform")`. Mounting a world as a library moves its files under such a root and flips the caller root to `@<lib>::`, which is what keeps the root-relative forms above resolving across the move. ## Discovery - `asset.list("module")` — every registered module. - `asset.inspect("<name>")` — public functions, source path, this type README. - `ls /zero/source/<name>.module` lists the files the folder holds. ## Authoring conventions - Return a single `M` table from `init.luau`. Top-level statements with side effects run on first require — useful for one-time initialization, dangerous if they touch the engine before it's ready. - Write exported functions as `typed function`, not `function`: the argument types are enforced at the call and the checker knows the signature, so a caller's mistake is reported where they made it. - Annotate exported functions with `--!desc` / `--!arg` / `--!return` / `--!example` so the LSP, `tools.list`, and `asset.inspect` surface them. A function with no `--!desc` is reachable only by someone already reading this file. - Declare a VALUE with `Field.<kind>(default, mode, description)`, and a table whose members are reached through a metatable with `--!members <TypeName>` — the latter gives the surface its accepted member set, its type, and its documentation from one table. See `guides { path: "core/authoring" }` for all four rules and `modules/api/engine/entity.module/members.module` for a worked member table. - Keep module state in module-local upvalues or in `modules.state()`. A name the body declares without `local` lives in the module's environment, which every run of the module shares: a function the previous run left in place reads what the reload assigned. Module-locals start again from their initial values with each hot reload; the table `modules.state()` returns is the same table on both sides of every reload. - Prefer focused modules over kitchen-sink modules. If two halves of a module have no shared state, split them. ## Common pitfalls - **Cyclic requires.** A `require` chain that loops will return the partial table (the half built before the cycle was detected). Design for one-way dependencies. - **Engine-time side effects.** Don't `entity.spawn` at module top-level — the engine may not be ready. Expose an `M.init` and call it from a scene entrypoint. - **Hot-reload + module-local cache.** A module that caches expensive computation in upvalues loses that cache on reload — fine for dev, but be aware in performance work. - **`init.lua` vs `init.luau`.** Either works, `.luau` is canonical. - **Writing one while play runs.** A `/source` write made while play is running lands on the play shadow, and a guarded play-exit discards it unless it is kept. One `.module` write shadows `init.luau`, the `README.md` and the `.metadata` together. `vfs.write(path, bytes, { durable = true })` skips the shadow, and `vfs.promotePlayShadow` keeps what is already on it — the `core/vfs` guide has the model and what each route costs. ## Related types - `.component` — for entity-bound state + lifecycle hooks. - `.service` — generates content you don't have yet (a mesh, sound, texture, …) via a metered provider. - `.tool` — for a single agent-callable function with a YAML schema. - `.package` — to group several modules + components + scenes into one shippable folder. ## In the Inspector Exports: what the module exports (name, kind, signature), parsed from its source without running it, with **Check** (the LSP's diagnostics for its entry file) and **Open**.
▲ 0↑ born
▣
module · born here
❒asset
# clientSettings The client's settings: the person's own on this device for the account signed in, the same in every world, on every platform and in a headset. They are a different thing from a world's own settings: `settings` is the world's settings file (`/zero/source/.world_settings`), authored with the world. - **Declared once, by the engine.** A group is one tab of the settings menu: `clientSettings.registerGroup{ id, title, description, icon, order, visible }`, where `visible()` says whether the tab shows on this client now. Entries name their group: `clientSettings.register{ ... }`. A setting carries - a `field` its every value is held to (`Field.enum`, `Field.range`, `Field.bool`), whose default is the setting's default; `labels` names an enum's members, `step` and `format` shape a range; - a `scope`: `"device"` for what depends on this machine, `"userPlatform"` for what follows the person on this kind of platform; - an `effect` of kind `"engine"`: `apply(value)` takes the value into the engine (on register, on every change and when the account changes), and `changed(value)` runs only when the person changes or resets it. An action carries no field and no value: its effect is `run()`, shown as a `button`. `available()` on either says whether it can be used now and, when it cannot, why. Every word a person reads (`title`, `description`, `label`, `button`, an enum's `labels`) is text or `{ key = "namespace.key", values? }`, the catalog message said in the player's language each time the menu is drawn. - **Reading.** `clientSettings.get(key)` is the value the person chose, or the setting's default. `clientSettings.list()` states every group with each entry's value, default, `source` (`"player"` once the person chose one, `"default"` before), scope, choices or range, and availability; the menu draws exactly that list. A world reads the settings it needs, e.g. `clientSettings.get("xr.perspective")`. - **Changing.** `clientSettings.set(key, value)` holds the value to the field, keeps it and carries out the effect; `clientSettings.reset(key | group)` returns a setting or a whole group to its defaults; `clientSettings.run(key)` runs an action. Each is refused with world or agent code on the Luau stack, naming the setting: the person changes their settings in the menu, and a world reads them and never changes them. - **The System tab.** The settings show as the System tab of the app menu (`appMenu`), the menu the pause action opens: every visible group a section, with **Reset to defaults** on a section where the person chose something. `clientSettings.open(group?)` opens the menu on that tab, from anywhere, a world's own code included; the editor's **Settings…** and the gear on its dock in a headset do the same. The tab shows while `clientSettings.reachable()` is true, that is while some group is visible. - **The groups.** **VR** (`xr_menu`) shows while this client can draw to a headset; every other group shows in a headset as it does on a desktop. - **Where values are kept.** As preferences of the signed-in account on this device (`zero_account_prefs`, under `setting.<key>`), whatever the scope; with nobody signed in, the signed-out record. Signing in or out switches to that account's settings and applies them. `clientSettings.onChanged(fn)` hears each change, and `fn(nil)` when the account changes. `clientSettings.buildSection(model)` returns the System tab's widget tree for a state, laid out for a desktop, a phone or a headset's panel.
▲ 0↑ born
▣
module · born here
❒asset
# gamepad The pad-facing surface: which controllers are connected, what family they belong to, and what a legend should call a canonical button on them. Backs `Zin.gamepad`. Bindings never come through here. A scheme binds `B.padButton("south")` and evaluates against whichever pad is connected; this module answers the questions a UI asks — how many players have controllers, and which letter to draw on a prompt. ## Position, not letter The canonical layout names a button by POSITION, because position is what every pad shares — `south` is the lower face button on all of them. The letter printed on it is not shared: `south` is `A` on an Xbox pad, `Cross` on a PlayStation one, and `B` on a Nintendo one. `label()` resolves that from the device name the platform reported, so a binding stays device-independent and only the drawn glyph changes. Anything unrecognised reads as `xbox`, because the standard mapping every backend normalises to is the Xbox layout. ## Exports - `M.list() -> { Pad }` — every connected pad, in slot order. - `M.count() -> number` — how many pads are connected. - `M.get(slot) -> Pad?` — the pad in one slot. - `M.family(slot?) -> string` — `"xbox"` | `"playstation"` | `"nintendo"`. - `M.label(button, slot?) -> string` — the legend for a canonical button. - `M.available() -> boolean` — whether the session has ever seen a pad device. Latched by a device pad's first connection, so unplugging one does not flip a scheme's prompts back to keyboard glyphs on a cable knock. A pad the `inputSim` toolbox connects reads as one only while it is connected. Types: - `Pad = { slot, name, buttons, buttons_pressed, buttons_released, axes, simulated }` — the button fields are arrays of canonical names, `axes` a map of canonical axis name to number, and `simulated` marks a pad that came from the `inputSim` toolbox rather than a device. ## Usage ```luau local Zin = require("@builtin::modules.zinput") if Zin.gamepad.count() >= 2 then startLocalCoop() end ui.text("Press " .. Zin.gamepad.label("south") .. " to jump") ```
▲ 0↑ born
▣
module · born here
❒asset
# edui (module) The editor UI framework, built on the CSS-parity `ui.*` surface. `edui` is **editor-only** — gameplay and normal UI author raw `ui.*` widget trees (`{ type, style, props, children }`) and need no framework. `edui` provides the one thing a framework earns its keep for: editor chrome — a reactive app, a dock shell, and chrome primitives (panels, trees, toolbars, inspector rows, context menus, drag-and-drop). It replaces the deprecated `zui` for the editor. ## The reactive core (`edui.app`) `ui.*` dispatches interaction through **string callback ids** — a widget carries `props.onClick = "<id>"`, and the screen's registered env receives `onCallback(id, data)`. Closures can't cross the FFI boundary, so raw `ui.*` makes you manage those ids by hand. An `edui` **app** hides that. During a build it allocates an id per closure and records id→closure; its single `onCallback` looks the id up, calls the closure, and rebuilds: ```lua local edui = require("@builtin::modules.edui") local count = 0 local app = edui.createApp("counter", { layer = editorMask }) app:mount(function(a) return { type = "vertical", children = { { type = "label", props = { text = "count: " .. count } }, { type = "button", props = { text = "+1", onClick = a:cb(function() count += 1 end, "inc") } }, }, } end) ``` - `app:cb(closure, key?)` — allocate a callback id for `closure`. Pass a stable `key` so the id survives rebuilds (required for focus / drag / `ui.widgetState`). - `app:dispatch(id, data)` — what the broadcast calls; routes id→closure and rebuilds. Returns whether this app owned the id. - `app:markDirty()` — request a rebuild (coalesced during an in-progress build). - `app:rebuild()` / `app:mount(fn)` / `app:unmount()` — lifecycle. - `edui.current()` — the app whose builder is running (the primitives use it so you don't thread the app through every call). Builder and handler errors are logged, never thrown — one bad build never wedges the editor.
▲ 0↑ born
▣
module · born here
❒asset
# scheme The live set of activated input maps, and the per-frame dispatch that turns their bindings into the events a controller subscribed to. Backs `Zin.scheme`. ## Nothing is live until something activates a map A controller holds an `inputMap` ref, activates it when it takes control, and releases it when it gives control up. The live binding set is exactly the union of what current holders asked for, so an empty world has an empty input surface and an empty screen — no scheme is active by default, and nothing appears on a phone that no component consumes. For a component that drives the thing it lives on, taking control and being awake are the same moment, so `awake` / `onDestroy` are the hooks. For anything a player enters and leaves — a car, a turret, a menu — they are not: the car is still there after the player gets out, so the map goes live on entry and stands down on exit. ```luau public = { inputMap = Field.assetRef("inputMap", "@builtin::inputMaps.default", NoSync, "The controls this component reads."), speed = Field.number(5, NoSync, "World units per second at full deflection."), jumps = Field.number(0, NoSync, "How many times the jump control was pressed."), } local controls function awake() controls = public.inputMap:activate() controls.move:onInput(function(v, dt, active) if not active then return end local p = public.entity.position local step = public.speed * dt public.entity.position = { p.x + v.x * step, p.y, p.z - v.y * step } end) controls.jump:onPressed(function() public.jumps += 1 end) end function onDestroy() public.inputMap:deactivate(controls) end ``` What `activate` returned is this holder's **claim** on the map. Keep it and hand it back: releasing the claim disconnects the subscriptions made through it, and the map stays live for whoever else holds it. A claim also ends with the context that opened it. A component's claim is released when that component instance goes, whether or not it writes an `onDestroy`: the component is removed from its entity, the entity despawns, or the component hot-reloads (its new life's `awake` activates again). A claim a module body opens ends at the module's next run. `scopes.list()` names each standing claim as a `luau` row under the context it follows, and `scopes.release(tag)` ends it with everything else that context holds. ## Several maps compose by all being live The player's surface is the union of every live map, which is what a game needs: picking up a gun activates a weapon map and Fire appears beside the movement stick; dropping it takes away Fire and nothing else. Two controllers that each activate a map with a movement stick produce two sticks — visible, attributable to the second controller, and the importer's to resolve. Two components activating the *same* map read one set of controls, each through its own claim. A claim's release disconnects what that holder subscribed and leaves the other holders' handlers attached; the map leaves the live set when its last claim goes. `Zin.scheme.live()` reports each live map's `holders` — how many claims are still standing on it — and `heldBy`, which says who each of them is: `kind` (`"component"` or `"execute"`), `entity`, `source` as the `chunk:line` the activation was opened at, and the `label` the caller passed to `activate("weapon-swap")`. ## An activation reads the map's children as they stand now Every `activate` re-reads the map's `<name>.inputBinding/` children, so a control added, edited or removed since the map came up reaches the running set on the next activation. The controls are edited in place, so it reaches the holders already standing on the map too: their handles keep working and every subscription they made carries on across the edit. ## A map can stand another one down Composition cannot say "not while this is happening". A map declares the `group` its controls belong to and the groups it `suppresses` while live: ```luau -- driving.inputMap/init.luau return { group = "vehicle", suppresses = { "player" } } ``` Every live map in a suppressed group reads nothing and draws nothing for as long as the suppressor is live. It is **not** released: it keeps its holders, its handles and every subscription, and resumes untouched when the suppressor goes. So a car stands down walking without ever finding, owning or releasing the walk map — and a menu stands down the whole game with one declaration. A map that declares no `group` belongs to one named after itself, so it collides with nothing and can still be named by something that wants to stand it down. Declaring neither field composes with everything. The drop frame runs on the tick a map stands down, so a stick held at that moment reports its neutral value once and whatever it drove stops rather than sticking. ## Dispatch `_advance(dt)` evaluates every live binding once per tick, across every device class it carries — a tablet with a keyboard attached and a desktop with a pad plugged in both answer to whichever the player actually used, rather than to a nominated primary. | Event | Fires | Cadence | |---|---|---| | `input` | Once while the binding is active with `(value, dt, true)`, and once more on the frame it goes inactive with the neutral value and `false` | Per engine frame | | `pressed` / `released` | A button's edges | Per engine frame | | `changed` | When the value differs from the previous tick | Per tick | `input` firing on the drop frame is what lets one handler both start and stop the motion it drives, without a second subscription to notice the release. A frame carries more than one tick whenever a host calls `Zin.tick` beside the tick the engine already runs, or fast-forwards several ticks to converge smoothing. Evaluation follows the tick, so the smoothing lands and `changed` reports each step of it. `input`, `pressed` and `released` are stamped with the engine frame they were reported for, so the frame carries one of each however many ticks ran in it. Both edge sources hold this frame's edge for as long as the frame lasts: the input snapshot's `pressed` flag, and `Zin.virtual`'s previous-frame button table. That is what a second reporting pass reads as another press. `Zin.scheme.fired`'s `count` is the number of engine frames a control was active since it last cleared, so a button held across two frames reads 2 for one press. The `pressed` / `released` subscriptions are what count edges. A binding that declares a `context` is live only while that context is on top, the same activity rule actions apply. An `axis1` / `axis2` control's own `deadzone`, `curve`, `invert` and `smoothing` are applied here, in that order, to the reading its classes produced — after `as` / `unitsPerSecond` / `scale` have brought every class into the control's unit, so one deadzone written in that unit covers the stick, the mouse and the finger together. A deadzone is per value on an `axis1` and **radial** on an `axis2`. The shaping maths is `Zin.utils`', shared with the axis registry. `smoothing` is the one piece of the four that is stateful: the value is held per control across frames and approaches whatever the devices report next over the declared time constant. A control that leaves its context, whose group stands down, or whose gate closes has a neutral target, so it drains rather than cutting — and reports its drop frame when it arrives. ## Validation happens before anything registers Activation reads every child binding, collects every fault across all of them, and raises once with the lot. A map with three broken bindings names all three rather than one per attempt, and a map that fails validation registers nothing — a half-live map is worse to debug than one that refused to come up. ## Exports - `M.activate(mapRef, label?) -> { [name]: Handle }` — activate a map, return its handles. `label` names this activation in `M.live()`. - `M.deactivate(mapRef) -> boolean` — release a claim on a map. - `M.live() -> { { guid, name, group, suppresses, suppressedBy, holders, heldBy, bindings } }` — every live map in activation order. What tells an author why two sticks are on screen, or why the controls they activated answer to nothing, or who is holding the map standing them down. - `M.bindings() -> { { map, group, name, label, kind, context, suppressedBy, subscribers, record } }` — every live binding in activation order. The touch overlay builds from this, so what is on screen is exactly what some awake component asked for and nothing is standing down. - `M.suppressed() -> { [group]: mapName }` — which groups are standing down and what put each one down. - `M.has(name) -> boolean` — whether a named control is live anywhere. - `M._advance(dt)` — one tick of dispatch; wired into `Zin.tick`. - `M._childBindings(mapRef) -> { ref }` — the map's `.inputBinding` children, in name order. - `M._reset()` — test-only: drop every live map without firing anything. Types: - `Handle = { onInput, onPressed, onReleased, onChanged, label, kind }` — a thin view over the binding asset's own event facade, so a subscription made through a handle is the same one `ref.events.input:connect` would make and ends the same way.
▲ 0↑ born
·
assettype · born here
❒asset
# assetType (asset type) An asset type says what a kind of asset is: the files an asset of the kind is made of, the code that gives it behaviour, the interface a person uses to work with it, and how it is found, pictured and checked. A `<typename>.assetType/` folder declares a type called `<typename>`, and every `<name>.<typename>/` folder is an asset of it. `assetType` is itself a type, so a type is an asset like any other: it is created, versioned, installed and contributed the same way. ## Making a type `asset.create("assetType", "<typename>")` scaffolds a type. The type registers the moment its folder is written, anywhere under `/zero/source/`, and from then on `<name>.<typename>/` folders are its assets. An asset of a type that is not registered yet is not an asset, so make the type first. A type folder is a root: `~.x` in any file inside it names the type's own `x`, wherever the type is installed. Keep the type's whole implementation inside its folder and reach it that way. What a type folder must hold is set by this type's own `type.yaml`, the same way every type's `type.yaml` sets what its assets hold. `asset.validate` on a type reports anything missing, and the scaffold produces a folder that passes. ## What sets your type's schema (`type.yaml`) `type.yaml` is the structural contract every asset of the type is checked against. The keys below are the ones the engine reads; a key not listed here is ignored. | Key | What it controls | |---|---| | `suffix` | The folder suffix of the type's assets. Defaults to `.<typename>`. | | `primary` | The file or files that are the asset's content: what the asset resolves to when it is used. | | `entry_files`, `primary_aliases` | Further files that load as the asset or share its identity. | | `is_container` | Whether the suffix stays in the identities of what the asset holds. | | `is_opaque_walker` | Whether a walk of the tree stops at the asset and registers only its primary. | | `plural_dir`, `classify_exts` | Loose files in a folder of this name, or with these extensions, are assets of the type. | | `is_text_default` | Whether the asset's files are text unless stated otherwise. | | `broadcasts_subassets` | Whether assets nested inside an asset of the type are found by their own short name. | | `root` | `true` makes every asset of the type a root, so `~.x` inside one names that asset's own `x`. | | `contract_ref: { field, category }` | A key of the primary file that names another asset the asset is built on. | | `files: { required, optional }` | The files an asset holds (below). | | `allow_unlisted` | `false` reports every file the type does not declare. | | `aliases_from: [{ file, key }]` | Further names an asset answers to, read from its own files. | | `settings:` | Typed per-asset settings (below). | | `inspector:` | The interface people use for the type and its assets (below). | | `preview:` | How an asset is pictured (below). | | `references:` | Names of other assets the type's files carry (below). | | `indexing:` | What search reads for each asset (below). | | `describe:` | How a missing description is generated (below). | ### The files an asset holds Each entry under `files.required` or `files.optional` is `{ path, kind: file | folder, one_of_group?, content? }`. `*` in a path matches within one segment. Entries that share a `one_of_group` are satisfied by any one of them. `content` lists checks on the file's bytes: | Check | Passes when | |---|---| | `non_empty` | the file has content | | `json_field { key, type?, non_empty?, accept? }` | the JSON holds the key (a dotted path) with that shape | | `yaml_field { key, type?, non_empty?, accept? }` | the same for YAML | | `described { keys?, headings?, message? }` | the file says what the asset is (see "Ask your assets to say what they are") | Each check takes a `message`, which is what the author is told when it fails. ### Settings `settings: { values, schema: { type | instance, export? } }` gives every asset typed settings. `values` names the file an asset's values live in; `schema.type` declares one schema for the whole type, and `schema.instance` names a file each asset declares its own in. `asset.create` writes the resolved values, and a write to the values file reaches `onChange` with what changed. ## The human side (`inspector.luau`) A type is used by people through its Inspector, and without one the type is usable only from code. The Inspector is the type's interface for a person: for a procedural graph it is the graph editor, for a kit it is the tracking view of what the kit holds and what is still missing. Writing it is part of writing the type. `inspector: { type, instance? }` in `type.yaml` names the files. `type` is the interface for the type itself and for its assets; `instance` names a file an asset may ship to add its own. Each returns: ```luau return { sections = { { id = "graph", title = "Graph", build = function(ctx) ... end } }, replace = { contents = { ... } }, -- replace a default section by id order = { "graph", "contents" }, -- section order } ``` `build(ctx)` receives the asset and builds the section. A section's `title`, and the text its rows carry, is a string or an `i18n.text` value read from a catalog (`i18n.text("inspectors.mesh.title")`), which follows the editor's language. `asset.create("assetType", ...)` scaffolds a working `inspector.luau` to start from. `asset.validate` on a type that names no inspector, or names one that does not load, reports it. ## Say what your type is for (`about.yaml`) Every type carries an `about.yaml` that says what the type is for, in three plain-language texts: ```yaml intent: "Sets the typeface of the text in your game: UI, labels, signs and 3D lettering." function: "A font, from a TTF, OTF or WOFF file, made available to all of Zero's text, including 3D text." usage: "You choose it by name for your UI or your text, and the text appears in that typeface." ``` - **`intent`** is what the type is for in someone's game, in the words a game maker uses. Up to 800 bytes. - **`function`** is how it works today: what an asset of it is made of and what the engine does with it. Up to 1500 bytes. - **`usage`** is what a person or an agent does with one. Up to 1200 bytes. Write about the type as a whole, not one asset of it, and say what it does now. Agents read these texts to learn when to reach for the type and how; people searching find the type by them. The scaffold starts each text with `[[describe]]` and a note on what to write; a text that still starts that way counts as not written. `services describe` can write them. They show up in `asset.inspect` as `detail.about`, in `assetTypeRef:getAbout()`, at the end of the type's `types/<typename>` guide, and at the top of the type's Inspector. ## Ask your assets to say what they are A type can require each asset to carry a description: a file, written by the author or generated, saying what the asset is and what it is for. Declare it with a `described` check: ```yaml files: required: - path: "README.md" kind: "file" content: - { check: "described", message: "Say what this widget is for and where it goes." } ``` A file that is missing, empty or still has a line starting with `[[describe]]` fails the check, and so does a YAML file whose named `keys` are missing or over their `max_bytes`, or a Markdown file missing a named heading. `asset.validate` names the asset, and a push that carries it is refused with `message`. `services describe` finds such assets and writes their descriptions. `describe:` steers what is generated: ```yaml describe: guidance: "Say what the widget shows, what input it reacts to, and where it fits in a UI." examples: - "<identity of an asset of this type whose description reads well>" ``` An example is an asset of your type whose description is a true, written one, never a placeholder and never the asset being described; with none, leave `examples` empty. A type whose assets the model cannot perceive (a sound, a motion) says so in `guidance`, and the description is drawn only from what the asset's own files state. Start the file unwritten in your `template/`: a heading and one line starting with `[[describe]]`, never example content, which every new asset would carry verbatim. A type whose assets say what they are through their own content (a mesh, a texture) declares no check. ## The type's code (`behavior.luau`) `behavior.luau` returns one table. These are the keys the engine reads from it; anything else on the table is the type's own. ### What the type's assets can do | Key | Shape | What the engine does with it | |---|---|---| | `ref` | `{ [name] = function(self, ...) }` | Every function becomes a method on every asset of the type: `ref:name(...)`. | | `modules` | `{ [name] = require(".x") }` | Code the type's assets reach with `asset.containing(__FILE__).modules.<name>`. | | `events` | an events schema | Events an asset fires. Readers subscribe through `ref.events.<name>:connect(...)`; the type fires them. | | `refShapes` | `{ [method] = function(self) -> (typeExpr, source?) }` | The result type of a `ref` method for one particular asset (below). | | `namePattern` | a Lua pattern | The names `asset.create` accepts for the type's assets. Default `^[A-Za-z][A-Za-z0-9_]*$`. | | `derive` | `{ output, module, compute, fingerprint, matches?, required?, timeout? }` | A file computed from the asset when it is committed; a `required` one holds the commit until it lands. | Some `ref` names mean the same for every type, and the engine calls them: - **`instantiate(self, target?, opts?) -> (root, idMap)`**: puts the asset in a scene. Defining it is what makes the type scene-instantiable. Its return is a contract (below). - **`inspect(self) -> detail`**: what `asset.inspect` reports for the asset beyond the common record (below). - **`preview(self, opts)`**: renders the asset's picture; it wins over the type's `preview:` recipe. - **`previewMaterial(self) -> { material }`**: the material a `surface` preview paints. - **`saveDefinition(self)`**: writes the asset's in-memory edits back to its files in edit mode. Some names are answered for every asset before the type is asked, so a `ref` entry of the same name is never reached: `getSource`, `getBytes`, `getText`, `exists`, `deps`, `canInstantiate`, `canPreview`, `preview` (which calls yours when you define one), `meta`, `runtime`, `events`, `typeRef`, `modules`, and the residency flags `has_backing_asset`, `has_runtime_changes`, `cpu_resident`, `gpu_resident`. ### When the engine calls the type | Hook | Signature | When it runs | |---|---|---| | `onCreate` | `(name, opts) -> { [path] = contents }` | On `asset.create`. Returns the files of the new asset, laid over the type's `template/`. Annotate `opts`: its type is the schema `asset.create` checks the caller's arguments against. A `""` key writes a single loose file. | | `onReplace` | `(dest, files) -> files` | On an `asset.create` over an asset already at `dest`, after `onCreate`, so what the author added can be carried into the replacement. | | `onRegister` | `(self)` | Once per asset, when it first registers: when the world loads, on a live `asset.create`, and when an asset arrives later (installed, pulled, synced). This is what makes an asset take effect the moment it is written. | | `onChange` | `(ref, change)` | On every write to a file inside an asset of the type. `change` is `{ path, asset, type, kind, origin }`, plus `settings` and `settingsChanged` for a write to the settings values file; `kind` is `edited` or `seeded`, `origin` is `local` or `remote`. Filter on `change.path`. Writes to one asset arrive in order, each after the hook for the one before has finished, and the hook may wait on what it reads. A write the hook makes inside its own asset arrives later like any other, so keep the hook convergent. | | `onDependencyChange` | `(ref, change)` | When a module the asset's code requires is re-run, or a name the asset carries starts resolving. `change.kind` is `dependency`. | | `onDelete` | `(ref)` | When an asset of the type leaves the world: deleted, or the world it is in is swapped away. | | `validate` | `(ref) -> { { code, message, severity?, path? } }` | On `asset.validate`, after the `type.yaml` checks, for the type's own rules. `severity` defaults to `error`. Runs on every push, so a type's rules hold at publish. A hook that fails reports `validate.hook_failed`. | ### Settings hooks | Hook | When it runs | |---|---| | `settingsDefaults(name, opts, asked) -> table` | Once per `asset.create`, for values the schema's defaults do not give. | | `settingsCorrections(values, name, opts) -> (corrections?, reasons?)` | On every settings write. A correction to a field the writer named refuses the write, giving the reason. | | `settingsDerivedDefaults(values, explicit, changed)` | On a settings write, for fields derived from others. | | `normalizeSettings(values, stored?)` | On every read and write, to map an earlier spelling of a field to the current one. | | `settingsHealed(values, stored)` | On a read, to repair stored values. | | `settingsSchemaProblem(schema, ref) -> string?` | When an asset's own schema is read; a returned string refuses the schema. | `creationInputs` (`{ [opt] = true | selectorOpt }`) names `asset.create` options that are inputs to the type rather than settings. ### Reloading An edit to `behavior.luau` reaches existing assets with no restart. ## How an asset is pictured (`preview:`) | `kind` | The picture is | The type provides | |---|---|---| | `instantiate` | the asset placed in the preview studio through its `instantiate` | `ref.instantiate` | | `image` | a file the asset holds, fitted to the frame | `source: { files }`, the candidate files in order | | `surface` | the asset painted on a mesh | `mesh`, and `ref.previewMaterial` | | `custom` | whatever `ref.preview` returns | `ref.preview` | ```yaml preview: kind: surface mesh: sphere ``` `angle: [yaw, pitch]` turns the camera. The studio owns the light, the backdrop and the framing, so an asset pictures the same in every world. A type with no `preview:` that defines `instantiate` still answers `ref:preview()`. A picture is rendered when something asks to view it (the editor showing the asset, `ref:preview()`), when previews are generated on request (`assets.generatePreviews`), and when the asset is staged. An edit alone renders nothing. The picture records what it was made from, so a stale one is told from a current one. ## The names your type's assets hold (`references:`) Where your type's own format or API carries the name of another asset, declare it here: ```yaml references: keys: # a top-level key of the type's files that holds a name, or a table of them - { key: "shader", type: "shader" } args: # an argument of a call, counting from 1 - { call: "g:node", position: 2, type: "procNode" } fields: # a field of the options table a call takes - { call: "fx.beam", field: "material", type: "material" } ``` `type` is the category the name resolves in. `asset.declareReferenceKey`, `asset.declareReferenceArg` and `asset.declareReferenceField` declare the same from a script. ## What search reads (`indexing:`) `indexing:` is how assets are found. Search reaches an asset only through what its type's `indexing:` names, and adds nothing of its own. That includes you: an asset indexed badly is one you cannot find later, when you are making something else and need it. A type whose assets are never looked for says `indexing: none`. ```yaml indexing: data: # text, read from the asset's files - role: identity extractor: verbatim source: { file: "README.md" } - role: interface extractor: symbols source: { files: ["init.luau"] } - role: implementation extractor: verbatim source: { files: ["init.luau"] } content: # the picture - role: identity modality: image source: { file: "preview.png" } facets: # what a query filters and re-ranks by file: ".metadata" rigged: { type: bool, from: { components: { contains: SkinnedModel } } } roughness: { type: number, filter: range, from: { file: "mat.yaml", field: "floats.roughness" } } ``` **Roles.** Each `data` and `content` entry has a `role`, and a query matches in two slots: - **`identity`**: what an asset is. For anything you look at, the picture; for anything else, the text that says what it is. - **`capability`**: what it does and how it is made. `interface` (the signatures or shape a caller uses) and `implementation` (the body) both count as capability, and a type with code usually declares both. Ask what a person would recognise an asset of the type by, and what it does, and point each role at the file that says it. For text, that is the asset's description: the file your template starts with a `[[describe]]` block, which the author writes or `services describe` fills in (see "Ask your assets to say what they are"). **`data`.** `extractor: verbatim` embeds a file's text as it is; `symbols` embeds the declared signatures of code. `source` is `{ file }` or `{ files: [...] }`. Never index a file name (`source: { field: name }`): one or two words carry nothing to match. **`content`.** `modality: image` embeds the picture itself, so a text query matches what the asset looks like. A type whose assets are looked at makes the picture its identity. **`facets`.** What a query narrows and re-ranks the matches by. `file` is embedded whole, so keys nobody declared in it are still found. Each further key is computed for every asset and states a value for every one, including `false`: a file can imply "not rigged" but never say it, and a query separates rigged from unrigged only because the unrigged ones say `rigged: false`. A key is `{ type: bool | number | enum, filter?: range, from }`, where `from` is `{ file, field }` (a field of one of the asset's files, dotted for nesting), `{ metadata: key }`, or `{ components: { contains | any_outside } }` (what the asset's entities carry). ## What blocks a push A push checks every asset it carries against its type. These refuse it: - a required file that is missing, a `content` check that fails, a `described` file not written yet; - an error from the type's `validate`. Unlisted files and warnings do not. A `described` file blocks only a push that changes the asset. When a push is refused, the message names each asset and what it lacks. `world.publishBlockers()` and `zm status` read the same list without pushing. ## Typing a result from the asset (`refShapes`) A `ref` method whose result depends on the asset (one entry per child folder, per row of a config, per control a map declares) can only be annotated as `{ [string]: Thing }`, which accepts any key. `refShapes` states the result for each asset instead: a function returning a Luau type expression for that asset, and the module whose types the expression uses. Read the asset; never run it. ```lua -- inputMap.assetType/behavior.luau M.refShapes = { activate = function(self): (string, string) local names = {} for _, control in ipairs(M.ref.controls(self)) do table.insert(names, control.name .. ": Handle") end if #names == 0 then return "", "" end return "{ " .. table.concat(names, ", ") .. " }", "@builtin::modules.zinput.scheme" end, } ``` With it, `map.jump:onPressed(fn)` is checked and `map.noexisting` is reported. A per-asset type applies where the call site names which asset: a component field whose default names it, or an annotation `AssetRef<"inputMap", "<identity>">`. `asset.resolve(name, category)` carries only the category, and a name computed at runtime carries nothing, so calls on those keep the declared return. The type belongs to the call's result: index it there, or bind what you need from it there, and the names stay checked. `require("@builtin::assetTypes.assetType.shared.refShapes").published()` shows what was published: `categories` (each type's method surface) and `returns` (per-asset results by identity, then method). An identity missing from `returns` was never published. Results are recomputed when an asset is written; at most 64 assets of one type are read. ## Putting an asset in a scene (`ref.instantiate`) A caller writes one piece of code against every instantiable type, so what `instantiate` returns is fixed: ```lua local Instantiable = require("@builtin::assetTypes.assetType.shared.instantiable") M.ref = { instantiate = function(self, target, opts) local root = Instantiable.root(self, target, opts) -- compose the asset under `root`, now return Instantiable.result(self, root, idMap) end, } ``` **In.** `target` is the entity the asset lands under, or onto for a hierarchy type; with none, the type spawns a new root. `position`, `rotation` (three numbers in degrees, or a quaternion), `scale`, `name` and `temporary` mean the same for every type: `Instantiable.root` applies them to a root you make, `Instantiable.place` to one you adopt. Document any options of your own in the hook's `--!arg` docs. **Out.** `(root, idMap)`. `root` is the composed root, live when you return: build synchronously, never defer to a component's `awake`. `idMap` maps each original id to the spawned one, so a component that composes the asset again on every load can pass it back in and keep references into the composition. Every call goes through `Instantiable.result`, which refuses a root that is not live and turns a missing `idMap` into `{}`. ## Inspecting an asset (`ref.inspect`) `asset.inspect(ref)` builds a record every asset shares (`identity`, `name`, `guid`, `source`, `typeName`, `typeDefinitionPath`, `scope`, `origin`, `description`, `tags`), then calls `ref.inspect(self)` for the type's own `detail`: ```lua M.ref = { inspect = function(self) -- read the asset's own files, never runtime state: inspect works on an asset -- that has not been compiled, uploaded or registered return { --[[ what makes this asset what it is ]] } end, } ``` Without it, the record is the shared part alone, and an agent inspecting the asset learns nothing of what it is. A hook that raises leaves `detail` empty and sets `record.warning`. ## Discovery - `asset.list("assetType")`: every registered type. - `asset.inspect("<typename>")`: the type, its README and its `about.yaml` texts. - `asset.resolve("<typename>", "assetType")`: the type itself.
▲ 0↑ born
▣
module · born here
❒asset
# zinput zinput is the engine's Luau-side input framework and the **only** public Luau input API. It sits on top of the internal `__zero_input.*` FFI (snapshot, events, frameId, pointer-lock, simulate\*) and builds the control model above it in pure Luau: control assets grouped into maps, the live set of activated maps and its per-frame dispatch, per-device-class binding evaluation, the on-screen touch overlay, gesture recognisers, and the tick coordinator that advances all of it. The top-level module re-exports every submodule under a single table and owns the tick coordinator (`Zin.tick`) plus the unified handle namespace for `Zin.disconnect`. ## The control model A control is a `<name>.inputBinding/` folder inside a `<name>.inputMap/` folder. It carries a `label`, a `kind` (`button` / `axis1` / `axis2`), and a binding for each of the three device classes — `kbm`, `gamepad`, `touch`. A class set to `false` is a deliberate refusal. Nothing is live until something activates a map. A world activates the map it needs and subscribes to the controls it uses: ```luau public = { inputMap = Field.assetRef("inputMap", "@builtin::inputMaps.default", NoSync, "The controls this component reads."), speed = Field.number(5, NoSync, "World units per second at full deflection."), jumps = Field.number(0, NoSync, "How many times the jump control was pressed."), } local controls function awake() controls = public.inputMap:activate() controls.move:onInput(function(v, dt, active) if not active then return end local p = public.entity.position local step = public.speed * dt public.entity.position = { p.x + v.x * step, p.y, p.z - v.y * step } end) controls.jump:onPressed(function() public.jumps += 1 end) end function onDestroy() public.inputMap:deactivate(controls) end ``` What `activate` returned is this holder's claim on the map, and handing it back to `deactivate` disconnects the subscriptions made through it while the map stays live for whoever else holds it. Every activation reads the map's binding children again, so a control edited since it came up reaches the running set and the holders already standing on it. Several maps are live at once and compose: the player's surface is the union of them, so picking up a gun adds Fire beside the movement stick and dropping it takes away Fire alone. A map declares the `group` its controls belong to and the groups it `suppresses` while live, which is how a car stands walking down without owning the walk map. `Zin.scheme` holds the live set and runs the dispatch. `man topics/input` is the full walkthrough. ## Exports Subsystems (re-exported from the corresponding submodule): - `M.scheme` — the live set of activated maps and their per-frame dispatch. - `M.bindings` — binding constructors, evaluators, and the legend formatter. - `M.state` — per-frame snapshot reads plus held-time and synthetic repeat. - `M.events` — frame-event readers and `on`/`off` edge subscriptions. - `M.input` — `onBegan` / `onEnded` / `onChanged` / `onTextInput` listeners and `lastInputType()`. - `M.context` — the input context stack. - `M.chords` — sequence and simultaneous recognisers. - `M.gestures` — tap / double-tap / long-press / swipe / pinch / pan recognisers. - `M.touch` — per-finger contacts and `touch.*` listeners. - `M.surface` — touch-vs-kbm device-class classification. - `M.gamepad`, connected pads, family, button legends, each device's elements (`device`), the haptic outputs it offers (`capabilities`), and rumble. - `M.virtual` — the per-tick virtual-control store on-screen controls write. - `M.touchControls` — the on-screen touch overlay (stick, drag-look zone, buttons) and the API that adds a control while a world runs. - `M.emulation` — the map-driven key-emulation floor. - `M.pointer` — pointer lock: named holders ask for it (`lock` / `unlock`), `holders` names them, `requested` / `locked` / `status` read what the engine made of the ask from the input snapshot, leaving the input observation as it stands. - `M.back`: Back, claims a world holds while Back means something to it, and `press` to issue one. The engine routes each press to the topmost dismissible overlay, else the most recent claim, else the platform's own default (an Android app moves to the background). - `M.test` — synchronous test-input helpers. - `M.controllers` — `free` / `orbit` / `fps` controller factories. - `M.profile` — binding profiles, saved as JSON and loadable from `@builtin::profiles.<name>`. - `M.rebind` — interactive binding-capture sessions. - `M.conflicts` — the binding-collision reverse index. - `M.autoTick` — the opt-in per-frame tick worker. - `M.utils` — pure helpers. - `M.actions` / `M.axes` / `M.map` — the name-registered action, axis and map registry. A control asset replaced them; each carries its own `--!deprecated` message naming the replacement. Tick coordinator: - `M.tick(dt: number?)` — advance every stateful subsystem. - `M.lastTickAt() -> number` / `M.lastTickFrameId() -> number` — test/debug accessors. - `M._resetTickGuard()` / `M._resetLiveArmed()` — test-only. Handles: - `M.disconnect(handle: number) -> boolean` — accepts any Zin handle (input listener OR action handler) and routes to the right `disconnect`. Constants: - `M.VERSION` — the library version string. - `M.SPEC` — the VFS path of the architecture spec. - `M.ROADMAP` — the VFS path of the roadmap document. ## Raw state `Zin.state` and `Zin.events` are the snapshot and event layer that bindings evaluate against — the layer the emulation floor, rebind capture, and dev tooling operate on directly. Gameplay code subscribes to controls; polling `Zin.state.keyDown` from a world makes that world keyboard-only and draws the `engine-raw-key-poll` diagnostic at author time. ## Notes - `Zin.tick(dt)` is the single hub that advances every stateful subsystem each frame. Stateless features (state / events / utils / bindings / context) work without ticking; the live binding dispatch, axes, chords, subscriptions, held-time, repeat, and rebind are dormant until something ticks. - The first real input read arms the input system on its own: it starts `Zin.autoTick`, so dispatch, the touch overlay and the emulation floor advance with no host component and no explicit tick call. A host script component can still call `Zin.tick(dt)` from its `update(dt)` hook, and `Zin.autoTick.start()` remains available directly; both stay idempotent alongside the self-arming path. `Zin.test` engagement suppresses the arming so suites keep explicit control over tick cadence. - Same-frame re-tick dedup: `__zero_input.events()` is non-draining, so running the observe-and-dispatch pipeline twice in one engine frame would double-fire subscribers. The frame-id guard in `M.tick` and the autoTick worker keeps this from happening. - The handle namespace is unified: every handle from `Zin.input.on*` and `Zin.actions.bind` is drawn from a single counter, and `Zin.disconnect` routes any of them to the correct `disconnect`. `Zin.input.disconnect` and `Zin.actions.disconnect` are also wired to the unified dispatcher. - Library users can either grab the whole table (`require("@builtin::modules.zinput")`) or pull one submodule (`require("@builtin::modules.zinput.state")`). - `__zero_input` is an internal namespace — reachable from Luau but hidden from `/docs/api/`; production game code goes through Zin.
▲ 0↑ born
❒
package · born here
❒asset
# edui The editor UI framework, on the CSS-parity `ui.*` surface. An editor-only toolkit: panels author closures instead of callback ids, a dock shell over `ui.*` native docking, and typed editor-chrome primitives. Gameplay and normal world UI author raw `ui.*` trees and need none of this. **`edui.guide` beside this file is how to use it** — creating a panel, the spec it returns, how a panel is drawn and redrawn, the whole widget vocabulary, and how a panel reaches the selection and the dock. ## What installs - **`framework`** — everything under one table. From outside the package, `require("@builtin::~edui.framework")`; inside it, `require("~.framework")`. It carries `app`, `widgets`, `shell`, `topbar`, `query`, `fileDialog`, `worldDialog`, `stats`, and the chrome primitives flat (`panel`, `tree`, `field`, `section`, `text`, `button`, `menu`, …). - **`app`** — maps a panel's closures to `ui.*` callback ids, dispatches to them, and coalesces redraws. - **`widgets`** — the primitives, plus the typed inspector layer (`widgets.tree`, `widgets.fields`, `widgets.controls`). - **`inspector`** — the Inspector as an ordered list of sections: the generic asset sections, the Settings section and its actions, and the merge with the sections a type's `inspector.luau` declares (`inspector.assetSections`, `inspector.settingsSection`), and the building blocks those sections compose (`inspector.parts`, reached as `ctx.parts`). - **`shell`** — the dock: one `ui.*` `dockArea` holding a `dockPanel` per registered panel, and the panel registry behind it. ## Referencing - Inside this package, modules reference siblings with `~.` — e.g. `require("~.app")`, `require("~.widgets.fields")`. - Editor content built on the framework references it by package identity — `require("~edui.framework")`, `require("~edui.shell")`.
▲ 0↑ born
▣
module · born here
❒asset
# luau_introspect (module) Parses Luau/asset source TEXT into structured declarations. Pure string/pattern parsing (`string.find` / `string.match` / `string.gmatch`) over the literal source — no compiling, no VM spawn, no runtime state, no engine FFI. Given source text, it extracts what is written in the file. This is the shared parser every per-assetType `M.ref.inspect` hook uses to turn a component/module/tool's own source into the structured record `asset.inspect` returns. ## Exports - `docstrings(src) -> DocMap` — scans `--!desc` / `--!arg` / `--!return` / `--!example` comment runs and binds each run to the name of the declaration on the next non-comment line (the identifier after `function`, `public:`, `local function`, or `M.`). - `publicFields(src) -> { FieldEntry }` — parses `public = { name = Field.<kind>(default, mode), ... }` table-literal entries and module-scope `public.<name> = Field.<kind>(...)` assignments. - `events(src) -> { EventEntry }` — parses `events = { name = Event(payloadSchema?, syncMode?), ... }` table-literal entries. - `methods(src) -> { MethodEntry }` — parses `function public:<name>(...)` / `typed function public:<name>(...)` declarations (params + optional return type). - `lifecycleHooks(src, catalog) -> { string }` — top-level `function <name>(` declarations whose name is in the caller-supplied `catalog` array. - `moduleExports(src) -> { ExportEntry }` — parses `M.<name> = function` assignments, `function M.<name>(...)` declarations, and a trailing `return { foo = foo, ... }` export table. - `forSource(src, computeFn) -> any` — memoises `computeFn(src)` keyed on `src` itself in a module-local table. The same source text returns the cached result without re-running `computeFn`; different source text recomputes. Keyed on the source content (not an asset checksum) because composite/container assets (component folders, scene folders, etc.) all hash to the empty-string checksum — a checksum-keyed cache collapses every such asset's detail onto whichever one was inspected first. ## Usage ```luau local Introspect = require("modules.luau_introspect") local src = self:getInitScript() local detail = Introspect.forSource(src, function(s) return { fields = Introspect.publicFields(s), events = Introspect.events(s), methods = Introspect.methods(s), hooks = Introspect.lifecycleHooks(s, lifecycleCatalog), } end) ``` ## Notes - Every function is a pure string→table transform: same source text in, same structured table out, every time. No reads of live component state, no entity/world queries. - Structural scanning runs over a comment- and string-aware **mask** of the source (a same-length copy where comment bodies and string-literal contents are blanked to spaces, delimiters and newlines preserved). Pattern matches and brace/paren balancing run on the mask — so a brace, `Field.`, `Event(`, or a whole entry that appears inside a comment or a string literal never registers — while captured values are sliced from the original source at the same (aligned) indices. This makes the parser robust to apostrophes in comments, commented-out entries, string defaults containing `}` / `Field.` / `Event(`, and `[[ ]]` long strings. - `default` / `category` are raw trimmed source-text slices (with any trailing comment stripped), not evaluated values. - For a **ref constructor** (`Field.assetRef` / `dataRef` / `resource` / `componentRef`) the FIRST positional argument is the category / contract / componentType selector, captured under `category`; the SECOND argument is captured under `default`. - For every **other** Field kind the first argument is the `default` and `category` is nil. - A trailing `Sync` / `NoSync` identifier is captured as `sync`, tolerating a trailing comma or a trailing comment after the last argument. - Field/Event entries whose key is a computed or indirect expression (`[expr] = Field.number(...)`) are omitted — only literal identifier keys are recognised. - `methods` captures a `...` variadic parameter (as `name = "..."`), with its `: <type>` annotation when present. - A `--!desc` written above a field/event declaration (`<name> = Field.<kind>(...)` / `<name> = Event(...)`) or a `public.<name> =` assignment binds to that name in `docstrings`, and is folded into the corresponding `publicFields` / `events` entry's `desc`. - `lifecycleHooks` never hardcodes the lifecycle-callback catalog; the caller passes the list of names to match against. - `forSource`'s memo is bounded (oldest-key eviction) so a long session touching many distinct asset versions can't grow it without limit.
▲ 0↑ born
▣
module · born here
❒asset
# assetType.shared.ref Builds the metatable every `AssetRef` (the `{ __ref, type, name, guid, identity, path }` envelope returned by `asset.resolve` / `asset.ref`) carries. Replaces the per-call C metatable that used to live in `crates/zero_scripting/src/ffi/bindings/asset.rs::attach_asset_ref_metatable`. ## Public API ```lua local assetRef = require("@builtin::assetTypes.assetType.shared.ref") -- Called by the Rust factory (push_asset_ref_handle) via -- _G.__build_asset_ref_proxy after the envelope fields are set. assetRef.build(envelope) -- attaches AssetRefMT, returns the table ``` The module exposes no invalidation surface — discovery is registry-driven and hot-reload is transparent (see "Discovery and hot-reload" below). ## Method dispatch order `ref.foo` is resolved in this order: 1. **Default methods** — `getSource` / `getBytes` / `getText` / `exists` / `inspect` and the lazy `meta` property. Per-type definitions cannot override these (engine contract from gh#1889). 2. **Per-type `ref` table** — discovered through `asset.resolve(<typename>, "assetType")` + `require(<identity>.behavior)`. The lookup resolves to whichever `<typename>.assetType/` folder is currently registered for the typename (built-in, user, or library-vendored) and pulls its `ref` methods. 3. **Nil** — unknown key, same shape as the original C metatable. ## Adding methods for a new asset type Drop a `behavior.luau` into the type folder: ``` src/lua/lib/assetTypes/<typename>.assetType/ ├── type.yaml -- structural spec (existing) ├── behavior.luau -- ref + global behaviour (new) └── template/ -- placeholder body (existing) ``` `behavior.luau` returns: ```lua return { ref = { --!desc Per-instance method on every `<typename>` AssetRef. myMethod = function(self, ...) ... end, }, global = { -- Reserved for the asset.<typename>.* surface — not consumed -- yet; included so the contract from gh#1889 lands cleanly. }, } ``` Within `ref` methods, `self` is the AssetRef envelope: `self.path`, `self.identity`, `self.guid`, `self.type`, `self.name` are available. Engine-required fields (`guid`, `path`, `identity`, `type`) must not be redefined. ## Discovery and hot-reload Type discovery uses the asset registry, so it doesn't matter where a `<typename>.assetType/` folder lives — engine built-ins under `@builtin::assetTypes.<X>`, user types dropped under `/zero/source/<X>.assetType/`, or types vendored inside an imported library all resolve identically. The dispatcher walks `asset.resolve(<typename>, "assetType")` → canonical identity → `require <identity>.behavior` on every miss; the asset registry is the cache for the resolve half and Luau's `_LOADED` is the cache for the require half. Hot-reload is transparent. When a `<typename>.assetType/behavior.luau` is rewritten through VFS, the engine's `invalidate_require_cache_for_state` re-runs the module and mutates the cached `_LOADED[<identity>.behavior]` table in place. Dispatch reads `mod.ref` on every access (rather than caching a sub-pointer), so existing AssetRefs see the new methods on the very next access — no Rust-side hook into this module is needed, and no invalidation API is exposed for callers to call. The same registry-driven path also handles type **registration** correctness: dropping a new `<typename>.assetType/behavior.luau` updates the asset registry, the next `asset.resolve(<typename>, "assetType")` returns the new ref, and AssetRefs of that type immediately gain the new methods. ## Why Luau, not Rust The asset surface needed per-category behaviour (`material:getProperties()`, `bundle:instantiate(entityId)`, `tool:run(args)`) and the old shape couldn't grow without an FFI change per method. Owning the proxy in Luau means: - Type-specific methods ship as content (the `<typename>.assetType/` folder), not engine code. - Adding a new asset type drops in a new folder; no Rust rebuild. - Methods can call any other Luau global (`vfs`, `asset`, `Material`, `entity`, etc.) directly, instead of going through narrow FFI primitives. ## Consumers - `crates/zero_scripting/src/ffi/bindings/asset.rs::attach_asset_ref_metatable` — the Rust factory that pushes envelopes invokes `_G.__build_asset_ref_proxy` once per push. - Every Luau call site of `asset.resolve` / `asset.ref` / `entity(id).component.X.material` / any binding declared `AssetRef<...>` — they all receive envelopes built through this module.
▲ 0↑ born
▣
module · born here
❒asset
# yaml.module YAML decode + encode for authored engine content. Pure Luau, no engine dependencies — a general parsing library, not data-system plumbing. ```luau local Yaml = require("@builtin::modules.yaml") local doc = Yaml.decode(vfs.read(path)) vfs.write(path, Yaml.encode(doc)) ``` ## Supported subset - Block mappings (`key: value`) and block sequences (`- item`), nested to any depth. - Compact sequence-of-mapping entries (`- path: x` / ` kind: y`). - Flow collections — `{ a: 1, b: 2 }` and `[1, 2, 3]` — single line. - Plain scalars with type inference: `~` / `null` → nil, `true` / `false` → boolean, numeric literals → number, everything else → string. - Single- and double-quoted strings (`''` escapes a literal quote inside a single-quoted string; `\n` `\t` `\r` `\\` `\"` inside a double-quoted one). A quote opens a quoted scalar where a scalar begins — after `key:`, after a `- ` entry marker, or inside a flow collection — so a plain scalar carries an apostrophe as data (`note: the world's rules`). Quoted keys are read in flow mappings. - `#` comments — honored outside quotes, so a `#` inside a quoted string is kept as data. - Literal (`|`) and folded (`>`) block scalars, with a chomping indicator (`-` strips the final newline, `+` keeps every trailing blank line, none keeps one newline) and an indentation indicator (`1`-`9`: the content's indent past the parent's), in either order (`|-`, `>+`, `|2`, `>1-`). A block scalar's content is literal text: quotes (balanced or not), `#`, `key: value` and `---` inside it are data. - An optional leading `---` document marker. ## Loud-error contract Constructs outside the subset above raise instead of misparsing: anchors/aliases (`&`, `*`), tags (`!`), directives (`%`), multi-document streams (a second `---`), a block-scalar header it cannot read (`|x`, `|-+`, `|0`), tab indentation, and inconsistent indentation (both block structure and block-scalar bodies). Every error carries the offending line number (`yaml: line N: ...`), so a bad config points straight at the line to fix. Tab indentation is rejected everywhere — including block-scalar body lines whose leading whitespace contains a tab. A tab after the first non-space character of a line is content and passes through. ## API - `Yaml.decode(text: string): any` — decode a YAML document into a Luau value (table, scalar, or nil for an empty document). Raises on malformed input or an unsupported construct. - `Yaml.decodeWithComments(text: string): (any, boolean)` — decode as `decode` does, and report whether the text carries a comment by the decoder's own rule: a `#` at a line's start or after whitespace, outside a quoted scalar and outside a block scalar. Re-encoding the value drops such comments, so an editor that writes a document back reads this first. - `Yaml.encode(value: table): string` — encode a Luau table as YAML (block style, two-space indent, alphabetically sorted keys). Raises on values YAML can't represent (functions, userdata, non-string mapping keys). A top-level empty table encodes to an empty document, which decodes back to `nil` (the YAML empty-document ambiguity).
▲ 0↑ born
▣
module · born here
❒asset
# json JSON encode/decode library for Luau. Encodes Lua values to JSON strings and decodes JSON strings back to Lua values. Used for communication with the Rust side of the engine, the VFS read/write bridge, and any wire-format that needs JSON. Pure Luau, no engine dependencies. Compact and pretty-printed encoders, plus a hand-rolled decoder that streams the input by position so it works under WASM as well as native. ## Exports - `Json.encode(value: any, indent?: string, currentIndent?: string) -> string` — compact encode. Functions / unknown types and NaN/Inf encode as `null`. - `Json.encodePretty(value: any, indentStr?: string) -> string` — pretty-printed encode with sorted object keys (diff-friendly). - `Json.encodeArgs(...: any) -> string` — encode varargs as a JSON array. - `Json.decode(str: string) -> any` — decode a JSON string. Returns the decoded value, or `nil` + error message on failure. ## Usage ```luau local Json = require("@builtin::modules.json") local widget = { type = "button", text = "Click Me" } local compact = Json.encode(widget) -- '{"text":"Click Me","type":"button"}' local pretty = Json.encodePretty(widget, " ") local decoded = Json.decode(compact) local v, err = Json.decode("oops") -- v = nil, err = error message ``` ## Notes - Object keys are sorted alphabetically in both encoders for consistent output across runs. - Numeric keys on objects are stringified at encode time (JSON has no numeric keys). Pure-integer key sets get detected as arrays via `isArray` and encoded with brackets. - NaN, +Inf, -Inf encode as `null` — JSON has no representation. Round trips through `decode` recover `null` (Lua `nil`), so they don't preserve. - Unicode `\uXXXX` escapes decode to UTF-8 by hand to stay WASM-safe. Only the BMP is covered; supplementary planes via surrogate pairs are not. - Functions encode as `null`. - Decode is character-streamed — no regex, no `string.match` patterns on the whole input — so the line-and-column information needs to be reconstructed from the position offset.
▲ 0↑ born
▣
module · born here
❒asset
# assetType runtime The machinery that reads a `<typename>.assetType/behavior.luau` and turns its declarations into live behaviour. A `behavior.luau` is a table of declarations — `ref` methods, `modules` shared code, an `events` schema, a `namePattern`, `refShapes`, and the `onCreate` / `onRegister` / `onChange` / `onDelete` / `validate` / `settingsDefaults` / `settingsCorrections` hooks. None of it runs itself. This is the code that runs it, and it lives here because reading a type's declarations is the **assetType type's own behaviour** — the same way `material.assetType` owns what a `.material` does. ## Sub-modules | Module | Reads | Responsibility | |---|---|---| | `ref.module` | `ref`, `modules` | Builds every `AssetRef` envelope, attaches the shared metatable, and dispatches per-type methods and shared modules onto it. Also owns edit-mode write-behind persistence. | | `create.module` | `onCreate`, `namePattern`, `validate` | Backs `asset.create`: resolves the type, checks the name against its pattern, runs `onCreate` (or clones `template/`), and writes the instance. `validate.module` beside it checks a creation `opts` table against the type's `createSchema`. Before running `onCreate`, resolves the type's settings chain (below) and hands the result to the hook as `opts.settings`. | | `settings.module` | `settings`, `settingsDefaults`, `settingsCorrections` | A type's declared settings schema and where its values live (`type.yaml`'s `settings:` block). `Settings.resolveForCreate` layers the schema's own defaults, the type's own `settingsDefaults(name, opts, asked)` hook (a DEFAULT the schema can't express — a name-derived convention, a fact read off a payload the caller handed it, a value following a field `asked` shows a higher layer naming; any later layer overrides it), the Preset Manager, an importer's settings, the caller's `settings` table, then the type's own `settingsCorrections(values, name, opts)` hook (a CROSS-FIELD CONSTRAINT the schema can't express, applied last over the fully merged values). A correction over a default/preset/importer value lands silently; a correction that would override what the caller's own `settings` table explicitly asked for refuses the creation instead, naming the field and why. Neither hook is ever handed a table to mutate; each returns what it wants changed (`settingsCorrections` may also return a `{ [field]: reason }` table for that refusal message). `Settings.cloneValues` deep-copies a values table — `create.module` hands `onCreate` a copy, never the table it stamps. `Settings.valuesOf` / `writeValues` read and write an asset's own values file. | | `typeYaml.module` | `type.yaml` | The folder a type lives in and its parsed `type.yaml`, decoded once per content version of the file. `settings.module` and `inspector.module` read their blocks through it. `about` / `aboutAt` read a type's `about.yaml` (`intent`, `function`, `usage`), leaving out any key that is empty or still starts with `[[describe]]`; `aboutRows` and `aboutMarkdown` lay the texts out for the Inspector and the `types/<name>` guide. | | `inspector.module` | `type.yaml`'s `inspector:` block | Which inspector a type declares for its assets (`inspector: { type: ... }` or `{ instance: ... }`), and the declaration that file returns — the sections it adds, the generic ones it replaces, and their order — or the problem that kept it from loading. | | `onRegister.module` | `onRegister` | Fires an instance's once-only registration hook — on arrival, on world load, and for `@builtin` library instances. | | `changeDispatch.module` | `onChange`, `onDelete`, `refShapes` | Routes a VFS source write or a folder delete to the enclosing typed asset's type hooks. | | `refShapes.module` | `refShapes`, `ref` | Publishes what every `AssetRef<category>` answers to, so a member read on an asset-typed value is checked against that category's real surface. | | `events.module` | `events` | The per-asset event runtime behind `ref.events`. | | `instantiable.module` | `ref.instantiate` | The instantiation contract an asset type opts into: `root` stands the root entity, `place` applies the base placement opts to one the type adopted, and `result` shapes the `(root, idMap)` every `instantiate` returns. Also registers the `sceneInstantiable` field-constraint validator. | | `declaration.module` | `type.yaml` | The type's decoded declaration, read once and held until a write inside an `.assetType` folder; what every question about a type as a whole reads. | | `previewRecipe.module` | `type.yaml` `preview:` | How an instance's `preview.png` is produced: which of the four recipes (`instantiate`, `image`, `surface`, `custom`) the type declares, and what that recipe needs. | ## Reaching it ```luau local rt = require("@builtin::assetTypes.assetType.shared") rt.ref.loadTypeBehavior("material") ``` Fields resolve lazily. The prelude requires the sub-modules directly, in dependency order (`ref`, then `changeDispatch`, `onRegister.install()`, `refShapes.install()`) — a table that required all six on load would take that ordering away from it.
▲ 0↑ born
backing path · modules/api/engine/xr_guide.module

Problems

Everything affecting this asset right now: its own problems, anything wrong inside it, and problems on its direct dependencies.

0problems
No problems reported on this asset or on the parts this page shows. Parts it leaves out are not counted here.
⌬ZeroMind agent review · awaiting first pass
Findings
Reviewer findings (handle · model · tag · quoted note) appear here once the per-pass review log lands. Today only the rolled-up agent_score is exposed.
usability—
did it work as advertised
quality—
authoring polish + cohesion
performance—
frame & memory budget held
agent review score
—
/ 100
awaiting first pass
usability × 0.40
+ quality × 0.35
+ performance × 0.25
± compat factor

Usability ratings

Did the part work as advertised when consumers tried to drop it in. Separate from upvotes: those are taste; this is "did it function".

—%no reports yet
Sign in to report whether this part worked for you.
Discussion

Scoped to this part · feeds back into the world's score.

0comments
Sign in to post.sign in
No comments yet. Be the first.