# lab
`require("crashLab.lab")` — builds the crashLab crash-test hall as static scene entities: `Lab.build(opts)`
spawns the hall, track, pit, gantries, control room, screens, signage, props, lights and colliders from
the package's authored meshes and materials, and returns the impact point, track start, camera spots,
screens and entity ids; `Lab.clear(root)` removes it. Called from a scene's `build.luau` or a host-only
setup step. See the package README for options, the layout contract and the styles.
# CrashRig
The shared crash-test rig. Put it on **one synced scene entity**. It needs no sibling components: it spawns
everything a test needs through the crashCars, crashDummies and crashObstacles parts.
- **Who runs the test.** The peer that owns the entity is the authority: it spawns the car, the dummy in
its seat and the obstacle (all synced), launches the car, measures it and writes the `CrashResult` into
the synced `result` field. Every player sees the same test and the same numbers.
- **Who can ask.** `rig:request("prepare" | "run" | "reset" | "clear", config?)` works from any peer; a
non-owner's request travels to the owner over `multiplayer.send`.
- **How a run goes.** `state` moves through `idle`, `preparing`, `ready`, `countdown`, `running`,
`settling` and `results`. `message` is one human line for a HUD.
- **How it launches.** Cars are towed (speed builds over 60 % of `runup`, released 1 m out) or driven
(`config.mode = "drive"`). Rear hits launch the moving barrier into the parked car. Side hits slide the car
sideways into the pole.
- **Replay.** Every peer records what it sees; `rig:replay{ speed = 0.25 }` plays it back locally as ghosts,
and `rig:stopReplay()` ends it. The live crash entities sit on the render layers `default crash`.
- **Changing owner.** A new owner that finds a test half-run sets it up again.
Fields: `origin`, `runup`, `countdown`, `config`, `state`, `testId`, `result`, `carId`, `shellId`,
`dummyRoot`, `dummyHead`, `dummyBodies`, `obstacleRoot`, `moverId`, `spawned`, `message`.
See the package README for the `CrashResult` fields and measured numbers.
# AmbienceLoop
A quiet looping background bed for a place, such as the hum of a building or the air of a hall. It is heard by each player on their own machine, at the same level wherever they stand, with no 3D falloff.
Add it to any entity in a scene. With no `clip` it plays soundstage's **station** bed, `media/audio/ss_bed_station.soundClip`, which was installed on its own from the Soundstage kit (ZeroMind asset `e6aff3f7-f4b5-4242-bb00-5ea5d3b517f8`, MIT). That bed is a low electrical hum with air recyclers, a soft machinery drone and distant beeps. In Crumple Zone it stands in for the crash hall's plant room.
```lua
-- in a scene's build.luau content(), or from game code
local amb = entity.spawn("HallAmbience")
amb.component.add(asset.resolve("AmbienceLoop", "component"), { volume = 0.35 })
```
| Field | Default | What it does |
|---|---|---|
| `clip` | empty (station bed) | The looping soundClip to play. |
| `volume` | 0.35 | Level once faded in, 0..1. Keep it low: it sits under the impact sounds. |
| `fadeIn` | 3 | Seconds it takes to fade in when play starts. |
| `on` | true | Turn it off without removing the component. |
It needs nothing else on the entity. It adds a looping, non-spatial `Audio` component with `sourceType = "Ambient"`, only in play mode, and removes it when the component or the entity goes away. Nothing syncs: every peer plays its own copy, which is right for a bed every player hears the same.
# CrashGame
The player-facing layer of Crumple Zone, as configuration: it runs `crashSession.session` (the whole loop: title, set-up panel, countdown, live cameras, impact sound, results, slow-motion replay, REPLAY / NEXT TEST / SKIP / SET-UP, programme credit and unlocks) with the game's own title and credits, `CRUMPLE ZONE` branding, the three impact sounds in `game/sounds`, element prefix `cz` (ids `cz_run`, `cz_next`, `cz_chip_<cat>_<id>`, `cz_speed_<n>`, …), screen `crumpleZone_game`, and the 15-test programme in `game.programme`. Put it on one scene entity; it runs locally on every peer off the synced `CrashRig` on `rigName`.
Fields: `rigName`, `cameraName`, `theme` (`military`), `showTitle`, `countdownStyle` (`trafficLight`), `replaySpeed` (0.25), `replayDelay` (2.5 s), `layer` (40).
# crashLab
The crash-test **facility** a crash-test game happens in, as one installable part: a 40 m x 100 m x
14 m indoor crash hall, closed and light-tight, lit like a real crash lab (crash labs are brutally lit
for high-speed cameras).
- **Floor.** Polished concrete in 5 m slabs with saw-cut joints. A darker sealed 10 m **test track**
runs down the middle with white edge lines and 1 m / 5 m distance ticks. Numbered **distance
panels** sit every 5 m (0–75 m), with a chequered **start line** at 60 m and yellow/black
**safety lines**. A **tow-cable slot** with its cable runs down the centreline.
- **Impact zone.** A dark epoxy pad with a 1 m camera grid, a red impact line at the face and a
hazard-striped border.
- **Observation pit.** A glass-covered, LED-lit pit under the impact point, with a ladder and a
camera tripod, for under-car shots.
- **Lighting rigs.** Two flood-light gantries with 8 aimed flood heads, an 8 x 8 m overhead LED rig,
57 linear high-bay fixtures, roof trusses and ducts.
- **Load-cell wall.** A reaction block with a 4 x 8 load-cell plate array and chevron panels.
- **Control room.** Raised, with sloped glazing, operator consoles, live-looking monitors, racks
and stairs.
- **Screens and signage.** Three big result screens, 2 m high-speed-camera grid boards, wall
distance boards, hazard and safety signage, lit "TEST IN PROGRESS" / "FIRE EXIT" boxes and
crash-test photo targets.
- **Props.** Cable trays with cables, tool carts, spare barrier blocks and honeycomb barrier faces
on pallets, a two-post lift, a test car on jack stands, a tyre stack, the tow winch, bollards,
fire extinguishers and electrical cabinets.
Three lighting moods: `modern` (white LED hall), `classic` (warm halogen, green-and-blue 1970s lab),
`night` (dark hall, hard cold floods). `Lab.build` returns the impact point, the track start, ready
camera spots and the screens.
Everything is plain **static scene entities** built from authored `.mesh` / `.material` /
`.texture` assets in this package. Call it from a scene's build (`build.luau`) or a host-only setup
step, and every peer gets the same hall. It needs no other part.
## Install
Install the package `crashLab` from ZeroMind. It lands at `/source/parts/crashLab.package` or
wherever you install it. Require it by its bare name:
```luau
local Lab = require("crashLab.lab")
```
## First example
Run this in edit mode (an `execute`, or inside a scene's `build.luau` `content()`). It builds the
hall at the origin and puts a camera on the high-speed side spot:
```luau
--!strict
local Lab = require("crashLab.lab")
local lab = Lab.build({ origin = { 0, 0, 0 }, style = "modern" })
print("impact point", lab.impact[1], lab.impact[2], lab.impact[3])
local spot = lab.cameraSpots.highSpeedSide
local cam = entity.spawn("HighSpeedCam")
cam.localPosition = spot.pos
cam.component.add("Camera", { fov = 50, priority = 10 })
cam.lookAt(spot.lookAt)
```
Run it again and the old hall is replaced, not duplicated. `Lab.clear(lab.root)` removes it.
The example scene `examples/labDemo.scene` does the same from its `build.luau`, with a camera
behind the start line looking down the track and no sky. Load it with
`zero scene load labDemo` (identity `parts.crashLab.examples.labDemo` in this world).
## Gallery
`examples/labGallery.scene` shows all three styles side by side, 60 m apart along X: `modern` at
x = −60, `classic` at 0 and `night` at +60. Each hall's name is a big in-world label over its track
and on its roof. Its main camera (`GalleryCamera`) sees the three roofs from outside, and
`GalleryCam_modern` / `_classic` / `_night` look down each hall past its label. The scene's build is
one call you can use in your own scenes:
```luau
local Gallery = require("crashLab.gallery")
local g = Gallery.build({ origin = { 0, 0, 0 }, spacing = 60, ambientStyle = "modern" })
-- g.halls[style] is that hall's LabHandle; g.cameraSpots.overview / g.cameraSpots[style]
```
Only `ambientStyle` adds an ambient light, because a scene resolves only one. A rebuild replaces the
gallery, and `Gallery.clear(g.root)` removes it. Three halls are 39 lights, 18 of them shadowed
spots, so the gallery is a showcase rather than a game scene.
## Tests
`crashLab.testSuite` covers the styles, asset resolution, the layout contract (it reads every mesh
triangle back against the clear space), the camera spots, build / clear / rebuild, and the gallery.
Run it with `zero tests run crashLab` in edit mode.
## API
```luau
Lab.build(opts?) -> LabHandle
Lab.clear(root) -- despawn a hall (and everything under it)
Lab.STYLES -- { "modern", "classic", "night" }
Lab.LAYOUT -- the layout contract below, in the lab's local frame
Lab.LIGHTS -- per-style light colours / intensities (edit before build to retune)
```
| option | meaning |
|---|---|
| `origin` | `{x, y, z}` world position of the impact point (default `{0, 0, 0}`). Everything is laid out relative to it. |
| `style` | `"modern"` (default), `"classic"` or `"night"` |
| `parent` | entity id or proxy to build under (default: top level) |
| `name` | root entity name (default `"CrashLab"`). A rebuild replaces an existing root of this name under the same parent; give two halls different names. |
| `ambient` | add an ambient `Light` for the style (default `true`). Pass `false` if your scene already has one: a scene resolves one ambient, and two make the engine warn about the tie. |
| `colliders` | add the floor, pit-glass and wall colliders (default `true`) |
`LabHandle`:
```luau
{
root = "ent_…", -- the hall's root entity
style = "modern",
impact = { x, y, z }, -- = origin: the obstacle's impact face, floor level
trackStart = { x, y, z + 60 }, -- where cars start (up to)
cameraSpots = { -- world positions, { pos = {x,y,z}, lookAt = {x,y,z} }
highSpeedSide, overhead, barrierFace, chase, underCar, gallery, wide, startLine,
},
screens = { -- the three result screens (8 m x 4 m)
main = { id, center, normal, width, height }, -- back wall, above the load-cell wall, faces +Z
left = { … }, -- left wall beside the impact zone, faces +X
data = { … }, -- left wall halfway down the track, faces +X
},
ids = { meshes = { [meshName] = id }, lights = { id… }, colliders = { id… },
floor = id, glass = id, ambient = id? },
}
```
The camera spots, relative to `origin`:
| spot | pos | lookAt | what it shows |
|---|---|---|---|
| `highSpeedSide` | (11, 1.2, 1.5) | (0, 0.8, 1.5) | side-on at the impact face, grid boards behind |
| `overhead` | (0, 9.6, 2.0) | (0, 0, 1.6) | straight down on the impact, under the LED rig |
| `barrierFace` | (3.6, 1.6, -0.8) | (0, 0.7, 6) | from beside the barrier at the oncoming car |
| `chase` | (0, 2.4, 67) | (0, 0.9, 52) | behind the start line, down the track |
| `underCar` | (0, -1.6, 3.5) | (0, 2.0, 3.0) | inside the pit, up through the glass |
| `gallery` | (17.4, 4.65, 14) | (0, 0.8, 1) | from the control room, over the consoles |
| `wide` | (-15, 9, 30) | (0, 1, 5) | establishing shot from high on the left |
| `startLine` | (-6.5, 1.6, 64) | (0, 0.8, 0) | down the whole track to the load-cell wall |
A screen is its own entity carrying a `Model` with an emissive idle material, so a game can swap its
material or place a `UiPanel` / readout on it using `center`, `normal`, `width` and `height`.
## Layout contract
In the lab's local frame (add `origin`):
- **Impact point** at the origin. The obstacle's impact face stands at **z = 0, facing +Z**.
- **Track.** Cars start at up to **z = +60** and run toward **−Z** along a **10 m wide** track centred
on x = 0 (edge lines at x = ±5).
- **Impact zone.** Obstacles sit at z ≤ 0 in the 12 m x 10 m impact zone, **x −6..6, z −10..0**.
- **Clear space.** **x −6..6, y 0..5, z −10..62** holds nothing solid but the floor. Cars, moving
barriers and side-impact slides travel there; no prop, post or light stands in it.
- **Floor.** Its top is at **y = 0**. Its collider is one static box covering **x −21..21,
z −21..81** (0.5 m thick), and it stays solid over the pit. The pit glass has its own thin box
collider as well.
- **Pit.** The opening is **x −2..2, z 1..6**, 2.4 m deep, under glass flush with the floor. The
`underCar` spot is inside it.
- **Hall.** The inner faces are at x = ±20, z = −20 and z = 80, with the ceiling at y = 14. Walls
have box colliders, so a car launched off the track stays in.
- **Load-cell reaction wall.** Its face is at z = −11 (x −8..8, 4.2 m tall), behind the impact zone.
- **Control room.** On the right wall: x 15.5..20, z 8..20, floor at y = 3.2.
## Styles
| style | hall | light |
|---|---|---|
| `modern` | white panels, grey dado, white steel | neutral 5600 K LED, bright floods, low ambient |
| `classic` | pale green panels, dark green dado, blue-grey painted steel | warm halogen floods and fill |
| `night` | charcoal hall | dim fill, hard cold floods on the impact, glowing pit and screens |
`Lab.LIGHTS[style]` holds each style's numbers (`floodI`, `trackI`, `fillI`, `rigI`, `ambientI`,
`pitI`, `roomI` and colours). Change them before `Lab.build` to retune.
## Performance
- **One hall is 55 entities.** It has 32 `Model`s, merged per material (about 75 k vertices in all),
and 13 lights.
- **Lights.** 4 flood spots on the impact and 2 track spots cast shadows (6, within the 8 a browser
handles comfortably). The 4 area lights, the pit and control-room point lights and the ambient
cast none.
- **Shadow casters.** Floor, paint, glass and emissive meshes cast no shadows.
- **No per-frame cost.** No component on the hall runs a script, and every sign and number is baked
into one 2048² atlas, not drawn with live text.
- **Not measured.** The GPU frame cost of the hall on its own: the desktop engine it was built on
was shared with other sessions running soft-body crash tests the whole time, and the browser build
could not be checked (see Known limits).
## Regenerating the assets
The meshes and textures are generated, not hand-modelled.
- `require("crashLab.labtex").buildAll()` re-bakes the textures: the floor maps, the signage atlas
(its text is rasterised with the engine's own font), the screens and the roof deck.
- `require("crashLab.labgen").buildAll()` re-authors every mesh. `buildAll({ "deck" })` rewrites only
the meshes named.
Both run in edit mode and take a few seconds, during which the frame stalls. The floor is an exact
tiling (concrete, paint, the epoxy pad, hazard bands and number panels each own their own patch of
the floor), and every sign is the front face of its own plate, so nothing lies on top of anything
else.
## Known limits
- **The scene's sky and haze still reach inside.** An agent can't bake a reflection probe here, so
the polished floor reflects the scene's sky and the scene's aerial-perspective haze shows down the
hall. `examples/labDemo.scene` turns the sky off (a `Skybox { kind = "none" }` entity in its `scene.json`). In a scene with a
bright blue sky the hall reads slightly cool. Baking a `ReflectionProbe` at the impact point
(`reflectionProbe.add(0, 3, 0, { radius = 40 })` then `reflectionProbe.bakeAll()`) fixes the
reflections.
- **The z-fighting diagnostic still marks real 3D detail.** It flags wall ribs, truss joints and
load-cell plates that stand a few cm proud of their surface when seen edge-on. That is a
conservative band, not overlapping surfaces: there are no coplanar overlays left.
- **Static by design.** Nothing in the hall moves, and the screens show baked idle pictures; put
live readouts on them yourself.
- **The web build is unchecked.** An agent can't start a browser engine to check the web build
(#20946).
# crashRig
A crash-test rig that **every player in a world shares**. Put one `CrashRig` component on a scene entity
and any player can set up a test (car, dummy, belt, obstacle, speed), run it, read the results and watch a
slow-motion replay. The rig builds on three sibling parts:
- **crashCars** (the crumpling cars),
- **crashDummies** (the ragdoll dummies and belts),
- **crashObstacles** (walls, barriers, poles, trees, moving barriers).
What it does on each run:
- **Spawns** the car, the dummy in its seat and the obstacle, all synced. Every player sees the same things,
and the dents and loose panels replicate.
- **Launches** the car one of four ways:
- a **tow** on a guide cable: speed builds over the first 60 % of the run-up and is released 1 m before
contact, as real tow rigs work;
- **drive**: the car drives itself, with rear-wheel drive, cruise control and a lane keeper;
- a **moving barrier** launched into a parked car's rear, for rear hits;
- a **side slide** into a pole, with the tyres' side grip released, for side impacts.
- **Measures** the dummy's head and chest and the car's pulse at the driver's seat. Motion probes sample
at the solver substep rate. Each channel is resampled to 1 kHz and filtered SAE J211-style: CFC 1000 for
the head, CFC 180 for the chest, CFC 60 for the car. From those come peak g, **HIC15**, the **3 ms clip**,
the car's peak and mean g, pulse length, crush (maximum and residual), energy, panels that came off, and a
**star rating** with good / acceptable / marginal / poor bands for head, chest and structure.
Each channel is filtered whole, then cut to the crash itself, from 120 ms before the rig sees the tested
face start to crush to 300 ms after (the brakes come on at +300 ms), so the tow and the braking never
set a peak.
- **Sets the seat up** for the dummy: after it settles, the rig hands the dummy's bodies to the car as
occupants (`setOccupants`) and fits the seat back's foam and the head restraint to it (`fitSeats`).
- **Publishes** a `CrashResult` in the synced `result` field, so every player gets the same numbers.
- **Records** what each player saw, so each player can replay it in slow motion. Pair it with
**crashCams**' director to show the replay from two or more angles.
## Install
Install `crashRig`, `crashCars`, `crashDummies` and `crashObstacles`; `crashCams` and `crashReadouts` are
the natural companions. Every part is required by its bare name (`require("crashRig.measure")`), so they
can sit in any folder.
## First example
Paste this into a scene's entrypoint. It works in play, in an empty world with any floor at y = 0 covering
x -10..10 and z -15..60, at the world's default 30 physics steps a second or at 60 (see "Physics rate" under
Known limits: the numbers this README quotes are at 60):
```lua
function onLoad()
local e = entity.find("CrashRig") or entity.spawnSynced("CrashRig")
local rig = e.component.get("crashRig.CrashRig") or e.component.add("crashRig.CrashRig", { origin = { 0, 0, 0 } })
task.spawn(function()
rig:request("prepare", { car = "hatch", carLook = "realistic", dummy = "adult50", dummyLook = "classic",
belt = "threePoint", obstacle = "wall", speedKmh = 56, mode = "tow" })
while rig.state ~= "ready" do task.wait(0.2) end
rig:request("run")
while rig.state ~= "results" do task.wait(0.2) end
local r = rig.result
if r.invalid then
print("invalid run, no rating: " .. r.invalidNote)
else
print(string.format("%.0f km/h: head %.0f g (HIC15 %.0f), chest %.0f g, crush %.0f cm, %d stars",
r.impactSpeedKmh, r.headPeakG, r.headHIC15, r.chest3msG, r.crushMaxM * 100, r.rating.stars))
end
local pb = rig:replay({ speed = 0.25 }) -- this player's slow-motion replay, as ghosts
end)
end
```
## API
`CrashRig` fields (all synced):
| field | meaning |
|---|---|
| `origin` | world point of the obstacle's impact face; the track runs toward +Z from it |
| `runup` | metres of tow (46) |
| `countdown` | seconds counted down before a launch (3) |
| `config` | `{ car, carLook, dummy, dummyLook, belt, obstacle, speedKmh, mode = "tow" \| "drive" }` |
| `state` | `idle`, `preparing`, `ready`, `countdown`, `running`, `settling` or `results` |
| `result` | the last `CrashResult` (below) |
| `message` | one human line about what the rig is doing |
| `carId`, `shellId`, `dummyRoot`, `dummyHead`, `dummyBodies`, `obstacleRoot`, `moverId`, `spawned` | what is on the track now |
| `testId` | how many tests have run |
Methods:
- `rig:request(action, config?)` works from **any** player.
- The rig's owner acts on it at once; anyone else's request reaches the owner over `multiplayer.send`.
- Actions: `"prepare"` (set the test up, then `ready`), `"run"` (count down, launch, measure, `results`),
`"reset"` (set the same or a new test up again), `"clear"`.
- `rig:replay({ speed = 0.25, loop, onDone, onFrame })` replays the last run on this peer only.
- It returns a playback with `stop()`, `time()`, `playing()` and `ghostOf(id)`, which gives the ghost
standing in for a live entity, for camera targets.
- The live crash entities are on the render layer `crash` ONLY (not `default` as well: a camera draws an
entity that shares any layer with it, so a wreck left on `default` showed under its own replay ghost as a
doubled car), so a replay camera draws
`"all !crash"` and sees only the ghosts.
- `rig:stopReplay()`, `rig:replayImpactTime()` and `rig:isBusy()`.
Modules:
- `crashRig.measure` holds the signal processing as pure functions: `channel`, `resample`, `cfc` (SAE
J211), `hic`, `clip3ms`, `peak`, `decimate` and `rate`.
- `crashRig.recorder` records any hierarchy's drawn poses and soft-body particles, and plays them back as
local ghosts: `new{ roots, track }`, `start`, `stop`, `trim`, `play`.
## CrashResult
`id`, `config`, `names{car,dummy,belt,obstacle}`, `mode`, `face`, `impactSpeedKmh`, `headPeakG`,
`headHIC15`, `head3msG`, `chestPeakG`, `chest3msG`, `carPeakG`, `carMeanG`, `crushMaxM`, `crushResidualM`,
`crushShare`, `energyKJ`, `structureKJ`, `energyNote`, `partsDetached`, `pulseMs`,
`rating{stars, head, chest, structure, score}`, `traces{dt, head, chest, car}` (filtered, ≤160 points
each), plus `invalid` / `invalidNote` when the solver diverged.
- **Energy:** `energyKJ` is the kinetic energy lost in the crash, ½mv² before minus after, with the moving
barrier included for rear hits. `structureKJ` is how much of it the car's crumple zone took, from the
crashCars lane model.
## Measured
Hatchback, 50th-percentile adult in a 3-point belt, rigid wall, 56 km/h, three runs:
| measure | result |
|---|---|
| crush | 0.56–0.61 m |
| car pulse | 34–42 g peak, 18–21 g mean, over ~100 ms |
| energy | 146–149 kJ (½mv² is 151 kJ) |
| head | 42–74 g, HIC15 70–450 |
| chest (3 ms) | 47–57 g |
| rating | 3–4 stars |
## Multiplayer
- One peer, the owner of the rig entity, runs each test. Everyone sees the same car, dummy, dents, loose
panels and numbers.
- If the owner leaves, the next owner finds the test half-run and sets it up again.
- Replays are per peer: each peer replays what it drew.
## Known limits
- **No simulation playback (#20544).** The engine can't record and play back the simulation, so the replay
is rebuilt from the poses and soft-body particles each peer drew. It is a faithful picture of what that
peer saw, not a re-simulation.
- **Ragdoll poses on other players' screens.** A ragdoll is drawn at physics-tick poses (#21188), and may
not show ragdolled for other players at all (#18554). Their replay of the dummy shows what they received.
- **Kinematic first step (#21187).** A kinematic body covers a frame's motion in its first step, so the rig
tows with velocities, never kinematically.
- **Waits are capped (#19849).** Long engine waits are capped, so a script waiting on a run should poll
`state` in short waits, as the example does.
- **Barrier energy (#20539).** Soft bodies don't report energy absorbed, so a crushable barrier's own share
of the energy is not in `structureKJ`; `energyKJ` (the kinetic energy lost) covers it.
- **Probe sample rate.** Probes sample at the physics substep rate, 240 Hz at a 60 Hz tick. Head and chest
are therefore band-limited by the physics rate: CFC 1000 / 180 filter nothing above roughly 120 Hz.
HIC15 and the 3 ms clip are computed on the 1 kHz resample.
- **Invalid runs get no rating.** The rig publishes a run as `invalid` (with `invalidNote` saying why, and
`rating = nil`: no stars) when its numbers can't be a crash test: the solver diverged (NaN, a head over
1000 g, a car over 400 g, a chest over 600 g); the car went much faster than the test asked before the hit
(`peakSpeedKmh` over 1.4x the target: a launch blow-up); or the car didn't arrive at the test speed (more
than 20 % off, 30 % for a ramp). The status line then starts "INVALID RUN (no rating)". crashReadouts draws
such a run with an INVALID stamp and no stars.
- **Physics rate.** A fresh world steps physics 30 times a second (`physics.tick_rate`); this world runs 60.
The rig works at either: every spring the rig and crashCars apply themselves (the positioning hold, the
seat, head-restraint, door and wheel foam, the airbag) is capped by the physics step and the body's mass,
so it can't overshoot and blow up at 30, and is untouched at 60. (Before that cap, at 30 the positioning
hold diverged a second into the tow and threw the car off at thousands of km/h.) The readings do depend on
the rate: family saloon, adult, 3-point, bollard, at 30 steps a second two series read head 16-18 /
23-39 / 38-42 g and chest 12-14 / 16-26 / 30-31 g at 30 / 50 / 70 km/h (crush 0.34 / 0.78-0.82 / 1.32-1.36 m),
against 26-29 / 37-40 / 49-54 g (one run in five at 70 km/h read 77) and 13-14 / 21-22 / 30-36 g at 60. At 60
every reading rises with speed and repeats within 20 %; at 30 the crush and chest rise, but the head spreads
more from run to run and a 50 km/h run can read as high as a 70 km/h one. For the readings this README and
crashCars' tables quote, set `physics.tick_rate = 60` in the world's settings (`/source/.world_settings`,
`[physics]`); the rig can't change the rate itself and warns once in the log when it is lower. Each result
carries `tickRate`.
- **Web build untested.** An agent can't start a browser engine to check the web build (#20946).
- **Wheels (#20543).** A car's wheels are WheelColliders: they have no volume and can't come off.
- **Publishing.** `zm push` can misreport its result (#21207, #21206, #21025): after a push, check the
world's published commit rather than trusting the message.
## Multiplayer checks (2026-10-26)
- Reset clears everything: three resets in a row left the world exactly as before (entities, bodies, colliders,
soft bodies), each new car undented to within 0.03 mm, and no replay ghosts left over.
- Every live test entity (car, shell, dummy, obstacle, moving barrier, and loose panels as they come off) is kept on
the render layer `crash` **on every peer**: layer membership isn't replicated, so each peer sets it, and
re-applies it as children stream in. A replay camera drawing `"all !crash"` then shows only the ghosts.
- What a second player needs is synced and verified with `multiplayer.explain`: the rig's `state`, `result`,
`message`, and the car's crush fields. No second client was connected for this check (#20946); a ragdoll may not
show ragdolled for other players (#18554).
## Round 3 (version 0.3.2): repeatable readings, three launch modes, airbags, 10–120 km/h
- **Repeatable readings.** The dummy settles counted in physics steps (until it is still relative to the car),
the seat is fitted, and from the start of the tow until the crush begins a **positioning hold** (the breakaway
tape a lab uses: a stiff, critically damped spring per dummy segment, in the car's frame) keeps the dummy where
it sat, so every test meets the obstacle from the same posture. The data window (−120 / +300 ms) hangs off the
physics step the crush began in, not off a frame. Family saloon, adult, 3-point belt, bollard, two runs each:
head 28/26, 40/37, 63/58 g and chest 14/13, 22/20, 38/36 g at 30/50/70 km/h (crashCars README has the table).
- **Launch modes** (`config.mode`): `tow` (cable tow, lets go 1 m before the barrier), `drive` (the car drives
itself in) and `ramp`: the tow lets go 0.5 m before a 3 m steel ramp whose lip stands 8 m out, angled 2–12°
(`crashRig.launch`) so the car comes down just short of the barrier; the impact speed is read when the crush
starts (a 50 km/h ramp test hits at 47.9 km/h). Frontal obstacles only; side and rear hits use the tow.
- **Airbags** (`config.airbag = "front"` or `true`): the car is spawned with crashCars' front airbags; the result
carries `airbag = { fitted, firedMs }` and the restraint name gains "+ airbag".
- **Speed**: any `speedKmh`; the game offers 10–120 km/h. Above about 80 km/h the car's crush and pulse stay
believable but the dummy's head reading does not (its neck runs into its joint stop): see crashCars' README.
- **`synced`** (default true): false runs the whole test on this peer only (offline, and the test suite, whose
play session holds no relay ownership).
- **Gallery** `examples/rigGallery.scene`: the three launch modes (with the ramp the rig builds) and every
restraint, each labelled, plain Models only (`examples/rigGalleryLayout`).
- **Tests** `crashRig.testSuite` (10): CFC filter, HIC15 against its closed form, 3 ms clip, monotonic readings,
decimation, star bands, recorder bookkeeping, and a whole 30 km/h wall test with airbags in play that publishes
a sane result and clears everything it spawned. Run `zero tests run crashRig` in edit mode.