# procPack — a family of procedural ops as content A `.procPack` is a FAMILY of procedural operations authored as content: a folder whose `init.luau` returns a **pack table**. When the asset registers, every def in its `ops` map joins the proc op registry under the stable string id the pack names it with, so a graph writes the id directly. Discover the available packs with `asset.list("procPack")`, and the ops any of them contributed with `procgen.searchNodes("", { pack = "<name>" })`. This is the one path an op family reaches the registry through. Procgen's own families are packs — `procPacks/` in this package holds one per family, and terrain's `terrain.procPack` sits in its own package the same way — so the packs shipped here are worked examples of exactly what you are writing, not a separate mechanism the built-ins are exempt from. ``` MyPack.procPack/ init.luau -- returns the pack table README.md .metadata ``` ## The pack table ```lua local proc = require("@builtin::systems.procgen.proc") local function transformed(ctx: any, geometry: any, params: { [string]: any }): any return proc.registry.get("geometry.transform").eval(ctx, { geometry = geometry }, params) end return { name = "myPack", -- the asset's own name when omitted description = "Moves and turns whole geometries.", ops = { ["myPack.lift"] = { description = "Lift a Geometry by a height.", inputs = { geometry = { type = "Geometry" } }, params = { height = { type = "Float", default = 1.0 } }, outputs = { geometry = { type = "Geometry", default = true } }, eval = function(ctx, inputs, params) return transformed(ctx, inputs.geometry, { translate = { x = 0, y = params.height, z = 0 } }) end, }, ["myPack.spin"] = { description = "Turn a Geometry about the up axis.", inputs = { geometry = { type = "Geometry" } }, params = { degrees = { type = "Float", default = 45 } }, outputs = { geometry = { type = "Geometry", default = true } }, eval = function(ctx, inputs, params) return transformed(ctx, inputs.geometry, { rotate = { x = 0, y = params.degrees, z = 0 } }) end, }, }, } ``` Each def is the same table every op in the registry is described by — typed input sockets, params, typed output sockets, and an `eval(ctx, inputs, params)` returning the outputs. `ctx` carries seed / nodeId / compositePath / hash / checkpoint. Validation is the same for every pack, so a malformed socket or an undeclared param type is refused here exactly as it is for the ones shipped in this package. ## procPack or procNode Both contribute ops that a graph evaluates, and both take the same def table. They differ in how an op is addressed: | | `.procNode` | `.procPack` | |---|---|---| | contributes | one op | a family | | addressed by | the asset's name, or its ref from `asset.resolve(id, "procNode")`, which the graph records by guid | the string id the pack names it with | | a graph writes | `g:node("n", "ScaleBy")` or `g:node("n", ref)` | `g:node("n", "myPack.lift")` | Reach for a `.procPack` when the ops belong together and you want to read the family's name at every call site; reach for a `.procNode` when one operation stands on its own. ## Registration lifecycle `init.luau` is compiled from its own source on every registration rather than `require`d, so an edit lands immediately and anything it pulls in uses an absolute require (`@builtin::systems.procgen.proc`). Every op's `version` is derived from the pack's source, so editing the file re-keys the node caches of every graph that reaches any op in the family — those graphs recook. Editing the pack to REMOVE an op unregisters it. A graph still naming it errors loudly at eval rather than cooking against a definition that no longer exists, and deleting the `.procPack` folder unregisters the whole family the same way. ## In the Inspector Operations: how many ops the pack registers, and each op's id, kind and what it does.

# terrainOps The `terrain.*` procgen op family: a whole landscape (a valley, a mountain range, an island ending in a coastline, a plateau cut into terraces) built as a procgen graph. `M.ops` is the family, keyed by registry id. `procPacks/terrain.procPack` returns it, and that asset's registration is what puts every op in the proc registry, the same `.procPack` path any author outside this package uses to contribute a family. The procgen toolbox's `searchNodes` lists them and `describeNode` gives one's inputs, params and outputs. The nodes a graph calls as `g.terrain.<name>` are this package's `terrain.nodebox`. | Movement | Ops | |---|---| | source | `terrain.source`: the rect of ground, in metres, at a resolution | | shape | `terrain.fbm` · `terrain.cone` · `terrain.ridge` · `terrain.ramp` · `terrain.flatten` · `terrain.terrace` · `terrain.stamp` · `terrain.layer` · `terrain.project` · `terrain.erode` · `terrain.coast` · `terrain.sea` · `terrain.lake` · `terrain.river` | | mask | `terrain.mask` writes a named layer; every raster kernel op reads one through `mask` / `maskMode` / `maskGain` | | bake | `terrain.write`: the whole landscape as a `.terrainData`: heightfield, control textures, holes mask, layer table | | carry | `terrain.to_texture` · `terrain.from_texture`: one layer in and out of a `.texture` | | stand | `terrain.scatter` · `terrain.drape`: points onto the surface, and anyone else's points back down onto it | The value every op takes and returns is a `proc.raster` **`Raster`**: a tiled GPU grid carrying named scalar layers (`height`, `water`, `waterMask`, and whatever `terrain.mask` names). ## What is in here | File | Role | |---|---| | `init.luau` | Assembles the family into `M.ops`. Owns `terrain.source`. | | `shape.luau` | The placed shapes: `flatten`, `cone`, `ridge`, `ramp`, `terrace`. | | `noise.luau` | `terrain.fbm`: multi-octave, optionally domain-warped fractal relief. | | `mask.luau` | `terrain.mask`: a soft band over one feature, written to a named layer. | | `project.luau` | `terrain.project`: a curve driving the ground by distance to its polyline. | | `surface.luau` | `layer`, `stamp`, `coast`: an external source blended into height. | | `water.luau` | `lake`, `sea`, `river`: one water body over three regions. | | `erosion.luau` | `terrain.erode`: droplet and thermal erosion batched over the tiles. | | `convert.luau` | `to_texture`, `from_texture`: a raster layer and a texture are the same field in two carriers. | | `write.luau` | `terrain.write`: the whole landscape as one `.terrainData` container. | | `scatter.luau` | `terrain.scatter`, `terrain.drape`: a point cloud off the ground, and points put back on it. | | `scene.luau` | `terrain.ground`: the ground the scene's Terrain entities stand on, which `drape` sets points on. | | `curve.luau` | A `Curve`'s control points flattened for the payload binding, shared by `project` and `mask`. | | `lanes.luau` | The eight vec4 dispatch lanes a placed-shape kernel's numbers are packed into. | | `modes.luau` | The shader numberings the ops declare. | `M.packers` and `M.payloads` expose each kind's dispatch numbers with no GPU dispatch and no readback, which is what a test verifies the maths through. ## Out of the graph A landscape leaves as a `.terrainData`: the heightfield, the control textures saying which surface covers where, the holes mask, the water surface and the table of what those surfaces are, held together as one asset. `terrain.write` takes the raster, a `name`, and the `layers` (the mask layer names holding each surface's coverage, in channel order), and answers the reference to the container. Its children are ordinary `.texture` assets written inside the container, so nothing here is a private format and a material samples a control texture the way it samples any texture. A `Terrain` component standing an entity on that container is what puts the ground in a scene. `terrain.to_texture` carries ONE layer out on its own, for a raster that is feeding something other than a landscape; `terrain.from_texture` is the way back in, and it is how a heightmap made anywhere else becomes ground these ops can carve.

# assetType (asset type) The `assetType` is the **type of types** — the meta-type that every `<typename>.assetType/` folder is an instance of, including itself. A `<typename>.assetType/` folder declares a new asset type called `<typename>`: its on-disk shape, its identity rule, and the structural contract instances of the type must satisfy. This type is self-hosting. `assetType.assetType/` conforms to its own schema — a `type.yaml` plus a `README.md` — so the type system is defined in terms of itself rather than a hidden engine special-case (the same way a C compiler is written in C). Every asset in the engine, including each `.assetType` definition, now resolves to a registered assetType: a `.material` resolves to `material.assetType`, and `material.assetType` resolves to `assetType.assetType`, which resolves to itself. ## Why it exists Assets used to be mapped to their type *implicitly*, by matching the folder suffix against a name-keyed registry. That match carried no stored link: nothing on a `Foo.material` recorded *which* `material.assetType` it was written against, so two worlds shipping a same-named type could silently disagree. Making `assetType` a real, resolvable asset closes that gap — the link from an asset to its type is now an explicit reference pinned in the asset's `.refs` sidecar (`via: "asset_type"`), exactly like every other dependency. ## Where it lives - Source: `/zero/source/.../<typename>.assetType/` - Identity: `<typename>` (the `.assetType` suffix strips from the identity; the folder retains the suffix on disk). - Folder shape: - `type.yaml` — the structural spec the validator reads. **Required.** - `README.md` — type-level documentation. **Required.** - `about.yaml` — three short plain-language texts saying what the type is for (see "Say what your type is for" below). Every built-in type ships one. - `behavior.luau` — optional behavior/scaffolding module. - `template/` — optional canonical placeholder body the templater copies into a new asset of the type. - `<name>.module/` — optional shared code the type ships to **every instance** of it, conventionally `shared.module/` (see below). ## Shared code its instances reach (`asset.containing` + `.modules`) A type ships code every instance of it uses by declaring the modules in its own `behavior.luau`, as a map of tracked `require`s: ```luau -- inside <typename>.assetType/behavior.luau M.modules = { shared = require(".shared") } -- the sibling shared.module/ ``` An instance reaches it with one location-independent line: ```luau -- inside any foo.<typename>/init.luau local api = asset.containing(__FILE__).modules.shared ``` `__FILE__` is the chunk's own VFS path; `asset.containing` resolves the calling asset, and `.modules.<name>` follows the instance's pinned `typeRef` (the type's **guid**, recorded in the instance's `.refs` as `via = "asset_type"`) to the module its type declares. Because resolution follows that link rather than a category name, the same line in an instance of a different type resolves to that type's module, and identically-named modules in two types never collide. `asset.typeRef(target)` reads that guid for any target; `asset.resolve(asset.typeRef(target))` gives the full `AssetRef<assetType>`. See `assetTypes/README.md` § "Shared code: type-owned modules" for the full mechanism. ## How to create one Authoring a new asset type is just creating a `<typename>.assetType/` folder under `/zero/source/`. The engine registers `<typename>` as a category **the moment the folder is written** — no engine restart, no Rust change, and it works for built-in (`@builtin/assetTypes/`) and user-defined types identically. Once `<typename>` is registered, `<name>.<typename>/` folders are recognised as assets of that type and resolve their `asset_type` link back to this definition. Creating a `<name>.<typename>/` folder *before* its `<typename>.assetType/` exists fails fast: the suffix has no registered type, so the folder can't be a valid asset. Author the type first. ## Say what your type is for (`about.yaml`) Every type carries a small `about.yaml` beside its `type.yaml`, and the README you write for the type documents how to author an asset of it. Both are required, and both are meant to be written as you make the type, while you know what it is for. `about.yaml` answers three questions in plain words, one key each: ```yaml intent: "Sets the typeface of the text in your game: UI, labels, signs and 3D lettering." function: "A font, from a TTF, OTF or WOFF file, made available to all of Zero's text, including 3D text." usage: "You choose it by name for your UI or your text, and the text appears in that typeface." ``` - **`intent`** is what the type is for in someone's game. Name the whole range of things it covers, in the words a game maker would use for them. - **`function`** is how it works today: what an asset of the type is made of and what the engine does with it. - **`usage`** is what a person or an agent does with one: how they pick it, place it, call it, or hand it to something else. A few habits keep it useful. Write about the type as a whole, so the text holds for every asset of it, and leave out any one asset's name. Say what the type does right now. Stay with words a game maker would say, and mention a file name or a call only where a game maker would know it. The limits are in bytes: `intent` 800, `function` 1500, `usage` 1200. Each is generous, and a few sentences usually say it. Why bother: agents working in a world read these three texts to learn what your type is for, so they reach for it when it fits and use it the way you meant. People searching find the type by what they want to make, and the three texts let them tell at a glance whether it is the one they need. `asset.create("assetType", name)` scaffolds the file with all three keys, and a README whose first paragraph is a `[[describe]]` note. Each value starts with `[[describe]]` followed by a note on what to write; replace the whole value with your own words. A value or a README line that still starts with `[[describe]]` counts as not written yet, which the push's check of each asset it carries against its type reports, naming the file. A type you leave as it was is not asked, so older types stand. Many types at once, or one you would rather not write by hand: `services describe` lists the types that lack these texts and what filling them costs, and `{ mode = "all" }` writes them into the same files, where you edit them like anything else you wrote. Where the texts show up: `asset.inspect("<typename>", "assetType")` returns them as `detail.about`, `assetTypeRef:getAbout()` returns them as a table with the keys `intent`, `function` and `usage`, the type's `types/<typename>` guide page ends with an "About this type" section holding them, and the Inspector's Type section lists them at the top. The guide page is this README plus that section, so a README that explains the type well and an `about.yaml` that says what it is for read well together. ## Ask your assets to say what they are A type can ask each of its assets to carry a description: a file, written by the author or generated, that says what that asset is and what it is for. The people and agents who find an asset read it to decide whether it fits, and the author knows what it is for at the moment of making it. **1. Declare the file with a `described` check.** This is the whole requirement: ```yaml files: required: - path: "README.md" # any file name works kind: "file" content: - { check: "described", message: "Say what this widget is for and where it goes." } ``` With that in place: - An asset whose file is missing, empty, or still has a line starting with `[[describe]]` does not meet the type's requirements. `asset.validate` names it, `zm status` and `world.publishBlockers()` list it, and a push that carries it is refused with `message`. - `services describe` finds it (`mode = "find"` lists it and the price) and can write the description for it (`mode = "all"`). It writes only this file. For a YAML file that holds several texts, name the keys and their limits in bytes, the way this type does for `about.yaml`: ```yaml content: - check: "described" keys: - { key: "intent", max_bytes: 800 } - { key: "usage", max_bytes: 1200 } message: "Write intent and usage." ``` `headings` names sections a Markdown file must have. `assetTypes/README.md` has the full check. **2. Optionally, steer what gets generated with a `describe:` block:** ```yaml describe: guidance: "Say what the widget shows, what input it reacts to, and where it fits in a UI." examples: - "<identity of an asset of this type whose description reads well>" ``` `guidance` says what a description of your type covers, and `examples` names assets whose descriptions show the shape you want. Without the block, generation still works from the general describing guide and the check's `message`. An example is an asset of your type in the library whose description is a true, written one, never a scaffold's placeholder, and never the asset being described. When the library has none, leave `examples` empty rather than name one that is not. A type whose assets the model cannot perceive (a sound it cannot hear, a motion it cannot see) says so in `guidance`: the description comes only from what the asset's own files state, such as its name and the `.metadata` where a generation service records the prompt that made it, and when they state nothing the model answers `cannot` with that reason. `services describe` then fails that one asset with the reason and leaves its file as it was. **3. Start the file unwritten in your template.** Put a heading and one line that starts with `[[describe]]` and a short note on what to write, in `template/<file>`, so a new asset starts unwritten rather than with text that only looks written. Do not put example content in it: every new asset carries the template verbatim, and the same text on many assets makes them impossible to tell apart in search. Types whose assets say what they are through their own content (a mesh, a texture, a sound) leave this out: declare nothing and nothing is asked. ## The `behavior.luau` contract `behavior.luau` is the type's code. It returns ONE table, and the keys below are the ones the framework reads off it for EVERY type — the surface you get by declaring them. Anything else on the table is your own: reachable by name through `require("@builtin::assetTypes.assetType.shared.ref").loadTypeModule("<typename>")` for a system that knows your type (`computeShader` publishes `dispatchKey` that way), and never called by the framework. ```luau local M = {} M.ref = { ... } -- methods on every AssetRef of this type M.modules = { ... } -- shared code the instances reach M.global = {} -- reserved key; ship the empty table function M.onCreate(name, opts) ... end return M ``` ### The tables | Key | Shape | What the engine does with it | |-----|-------|------------------------------| | `M.ref` | `{ [name] = function(self, ...) }` | Every function becomes a method on every `AssetRef` of this type: `ref:name(...)`, with `self` the ref. This is how a type gives its instances an API. Two names in here are contracted — see below. | | `M.modules` | `{ [name] = require(".sibling") }` | Shared code the type's instances reach through `asset.containing(__FILE__).modules.<name>`, resolved by the instance's pinned `typeRef` guid. See the section above. | | `M.refShapes` | `{ [method] = "TypeName" }` | Declares the result type of a `M.ref` method so the LSP can check what a call site does with it. See the `M.refShapes` section below. | | `M.events` | an events schema | The events an ASSET of this type fires, declared the way a component declares its own. Readers subscribe through `ref.events.<name>:connect(...)`; firing authority stays with the type. Keyed by the asset's guid, so every resolver of the same asset shares the signals and a re-resolved ref re-attaches to subscriptions already there. | | `M.namePattern` | a Lua pattern string | The name shape `asset.create` enforces for instances of this type, replacing the default `^[A-Za-z][A-Za-z0-9_]*$`. | | `M.global` | `{}` | Reserved. Ship the empty table. | ### The lifecycle hooks Each is optional; a type that omits one costs nothing. The engine calls them: | Hook | Signature | When it fires | |------|-----------|---------------| | `M.onCreate` | `(name, opts) -> { [filename] = contents }` | On `asset.create("<type>", name, opts)`. Returns the files that scaffold the new instance, as a map of relative path to contents; the framework writes them. The `opts` type annotation is the schema `asset.create` validates the caller's arguments against, so annotate it. | | `M.onReplace` | `(dest, files) -> { [filename] = contents }` | On an `asset.create` that writes over an asset already at `dest`, after `onCreate`. Receives the files `onCreate` produced and returns the files to write, so a type that re-derives its content (a rig re-imported from its source file) can carry what an author added to the asset it replaces. Optional. | | `M.onRegister` | `(self)` | Once per instance, the first time it registers: on `engine.onWorldLoaded` for instances already in the world, immediately on a live `asset.create`, and when an instance arrives after that sweep (installed, pulled, or synced from a peer). Guarded by the instance's path, so a double trigger never double-registers. An instance that leaves the runtime releases the guard, so one arriving at the same path again registers. This is what makes "write an asset into the world and it takes effect live" work for content that registers into a runtime registry. The `@builtin` library is excluded from the sweep. | | `M.onChange` | `(ref, change)` | On every VFS write to a file INSIDE one of this type's instances. `change` is `{ path, asset, type, kind, origin }`: `kind` is `"edited"` or `"seeded"`, `origin` is `"local"` or `"remote"` (an importer runs on the originator only). **Filter on `change.path`**: the hook fires for any file under the folder, so act on the one you care about. It runs as its own task and may wait on what it reads: a `vfs.read` of bytes only the blob store holds (a binary file on the web build) fetches them. The writes to one asset reach the hook in the order they were made, each once the hook before it has finished. A re-entrancy guard suppresses writes back into the same asset routed inline from the hook, and a write the hook makes is routed on a later frame like any other, so the hook must be convergent on its own: diff the meaningful state and short-circuit while your own regeneration is in flight. | | `M.onDelete` | `(ref)` | When an instance of this type leaves the runtime: it is deleted, or the engine swaps away from the world binding that held it. Its files are gone from `/zero/source` by then. A removal routed while the instance's `onChange` is waiting reaches `onDelete` once that hook, and every write queued behind it, has finished. On a swap the instance still exists in the world it belongs to, and a VFS write the hook makes reaches the world now bound. | | `M.validate` | `(assetRef) -> { { code, message, severity? } }` | On `asset.validate`, after the structural `type.yaml` check, for the type's own SEMANTIC validation. `severity` defaults to `"error"`; error-severity problems flip `ok` to false, warnings do not. A hook that raises or returns a non-table is itself reported as a `validate.hook_failed` error. `world.push` runs this per user asset, so declaring it enforces your type's rules at publish time with no further wiring. | ### The two contracted `M.ref` names Most `M.ref` methods are your type's own surface: name them what you like, return what you like. Two are read by the engine and mean the same thing for every type, so their shape is fixed: - **`instantiate(self, target?, opts?) -> (root, idMap)`** — makes an instance part of the scene. Defining it is the whole opt-in: `ref:canInstantiate()` is true exactly when it exists. Its **return is a contract** — see the next section. - **`inspect(self) -> detail`** — the type-specific half of `asset.inspect`. See its section below. ### Names a type cannot shadow Some keys resolve on every `AssetRef` before per-type dispatch, so an `M.ref` entry of the same name is never reached: `canInstantiate`, `getSource` / `getBytes` / `getText`, `exists`, `deps`, `meta`, `runtime`, `events`, `modules`, `typeRef`, and the residency flags `has_backing_asset`, `has_runtime_changes`, `cpu_resident`, `gpu_resident`. These are the behaviours every asset must expose identically, which is why they win. ### Reloading A `behavior.luau` edit ripples to existing refs with no restart: dispatch reads `mod.ref` fresh each time and `require`'s cache is re-run in place. A type whose folder appears at runtime is picked up on the next dispatch — negative results are not cached either. ## The names your type's assets hold (`references:`) An asset that names another asset by a string depends on it: the named asset travels with it into a pack or a pull, and a name nothing answers to is an unresolved dependency `worldValidation` reports and the push gate refuses. The engine reads `require(...)` and the asset lookups on its own; a name your type's format or API carries anywhere else is one you declare, in `type.yaml`: ```yaml references: # A top-level key of this type's own files that holds a name (or a table of them). keys: - { key: "shader", type: "shader" } # A call's argument, counting from 1, wherever the call is written. args: - { call: "g:node", position: 2, type: "procNode" } # A field of the options table a call takes. fields: - { call: "fx.beam", field: "material", type: "material" } ``` `type` is the category the name resolves in, one of `asset.categories()`. An argument declared once per category, at the same `call` and `position`, takes the name from whichever category answers. A key or a field holds one category: declared again with another `type`, it takes the later one. The block is declared as the type registers, when the library or the world holding it is laid into the VFS, so every reference table reads it whatever script has or has not run. `asset.declareReferenceKey`, `asset.declareReferenceArg` and `asset.declareReferenceField` declare the same things from a script, for a surface that is no type's. ## What search does with your type (`indexing:`) A type declares what search embeds for its instances. **This is not optional and there is no useful default**: ZeroMind runs your declaration and adds nothing of its own, so anything you do not point at is absent from the index — silently, and for every instance of the type forever. Twenty types once shipped with no `indexing:` block and every instance of them was unfindable. A type whose instances are never searchable (a run record, a log) says so with `indexing: none`; every other type declares a recipe. A type without an `about.yaml` beside its `type.yaml` refuses every push that carries it, whether or not the push edited the type. Texts in it that are not written yet follow the rule every `described` file follows: they refuse the push that edits, stages or commits the type. Two words carry the whole thing, and they are the same two the search tool exposes: - **`identity`** — what an instance IS. For anything you can look at, that is the picture (`content:` + `modality: image`, matched directly by a text query). For everything else it is the authored text that says what it is. - **`capability`** — what it DOES and how it is made. Code, settings, the model-written summary of them. A type with no behaviour has no `capability` entry. A type with nothing to look at has no image. Leaving a slot empty is a statement; filling it with whatever happens to be lying around is not. The one you have to decide when authoring a type is: *for an instance of this, what is the thing a person would recognise it by, and what is the thing it does?* A texture answers "the image" and "its compression settings". A module answers "its README" and "its code". Write those two answers into `indexing:` and the rest follows. Three specifics worth knowing before you write one: - **`derive` is instructed by this type's own `README.md`.** A model reads an instance's source and writes a description; what it embeds is the description, not the source. It follows your README to know what it is looking at, so a type whose README says what its instances are gets good derivations for free. There is no prompt to name. - **`derive` loses detail.** It keeps the main technique and drops secondary ones. If the source is code you want searchable by its own vocabulary, declare the same files a second time as `capability` with `extractor: verbatim`. Two entries, same role, different failure modes. - **Never `source: { field: name }`.** A filename is one or two words with no usable embedding, and a corpus indexed that way answers "language runtime" with `say_runtime_2.soundClip`. `facets:` is the second stage: a `file:` embedded whole (`.metadata`, so keys nobody declared still get indexed) plus computed keys that state a value for every instance including `false` — the raw file can imply "not rigged" and can never say it. The full schema, every extractor and the facet sources are in [`assetTypes/README.md`](../README.md); the scaffolded block with inline guidance is in [`template/type.yaml`](template/type.yaml). ## A container whose contents work together (`system: true`) A type that is a container can say its contents are one working whole by declaring `system: true` at the top level of its `type.yaml`. `package` declares it: the components, modules, scenes and tools a package ships are parts of one system. The declaration is plain data, read from the decoded `type.yaml` (`require("@builtin::assetTypes.assetType.shared.declaration").of("package").system`), and a type that leaves it out is an ordinary type. ## What your type looks like (`preview:`) A type declares how its instances are pictured, and the engine makes the picture when something needs it: staging an instance whose `preview.png` is missing or pictures content it no longer holds queues a render, a view that shows the instance asks for one, and `ref:preview()` renders one on demand. An edit renders nothing on its own. Each `preview.png` records the content it pictured, which is how a stale one is told from a current one. The preview studio owns the light, the backdrop, the framing and the camera, and nothing in the world reaches it, so an instance pictures the same in every world. Declare one of four recipes: | `kind` | The picture is | Your type provides | |---|---|---| | `instantiate` | the asset stood in the studio through its own `instantiate` | `ref.instantiate` | | `image` | a file the instance holds, fitted to the frame, nothing rendered | `source.files`, the candidate files in order | | `surface` | the asset painted on a builtin mesh | `mesh`, and `ref.previewMaterial(self) -> { material }` | | `custom` | whatever `ref.preview(self, opts)` returns | `ref.preview` | ```yaml preview: kind: surface mesh: sphere ``` A scene-instantiable type that declares nothing still answers `ref:preview()` through its `instantiate`, but persists no picture: the declaration is what makes the engine keep one. List `preview.png` among the type's files so an instance may hold it. The picture is findable only when `indexing.content` names it. The two are separate statements, and neither is derived from the other: ```yaml indexing: content: - role: identity modality: image source: { file: "preview.png" } ``` `@builtin::assetTypes.assetType.shared.previewRecipe` reads the declaration; the scaffolded block with inline guidance is in [`template/type.yaml`](template/type.yaml). ## Typing a result from the instance (`M.refShapes`) Every method on `M.ref` is checked against the type its `--!return` names, and every asset of the type gets the same one. That is right for most methods and wrong for the ones whose result is shaped by the ASSET: a method answering one entry per child folder, per row of a config, per binding an input map declares. The widest true annotation for those is `{ [string]: Thing }`, and an indexer accepts every key — so a caller's typo reads as valid and nothing reports. `M.refShapes` lets the type state the result per instance. Each entry is `function(self) -> (typeExpression, source?)`: a Luau type expression for THIS asset, and the module whose type vocabulary the expression uses. Read the asset; never run it — stating a type must not take effect. ```lua -- inputMap.assetType/behavior.luau — the shipped example. -- `activate()` hands back one handle per control the map declares. M.refShapes = { activate = function(self): (string, string) local names = {} for _, control in ipairs(M.ref.controls(self)) do table.insert(names, control.name .. ": Handle") end if #names == 0 then return "", "" end return "{ " .. table.concat(names, ", ") .. " }", "@builtin::modules.zinput.scheme" end, } ``` With it, `map.jump:onPressed(fn)` resolves and `map.noexisting` is reported with the map's real controls. Without it, both pass silently. ### What the call site has to say A per-instance type is matched by the asset's IDENTITY, so it applies only where the reference the method is called on says WHICH asset. Two spellings do: ```lua -- a component field, whose declared default names the asset public = { map = Field.assetRef("inputMap", "@builtin::inputMaps.default", Sync) } local controls = public.map:activate() -- typed for THAT map -- an annotation, naming category and identity local m: AssetRef<"inputMap", "@builtin::inputMaps.default"> ``` `asset.resolve("<identity>", "<category>")` carries the CATEGORY, so the methods the category defines are checked on the result — but not which asset it found, so a per-instance result keeps the category's declared return. A reference that names no asset (`asset.resolve(someVariable)`, a value passed in as a parameter) carries neither, and calls on it are unchecked. That is the same rule everywhere: the checker states what the code states, and a name computed at runtime states nothing. ### The result is a value, not a binding The type belongs to the expression, so it travels the way any inferred type travels. Indexing the call's result is checked; stashing it in a module local and indexing it from another function is not, because the local's declared type is what carries across — and `any` (or no annotation) carries nothing: ```lua -- checked: `d.greting` is reported function awake() local d = public.dialogue:lines() d.greeting:say() end -- NOT checked: `lines` is a module local typed `any` local lines: any = nil function awake() lines = public.dialogue:lines() end function start() lines.greting:say() end ``` Bind what you need at the call site and the names stay checked in both places — the asset-derived type at the boundary, ordinary scoping after it: ```lua local lineGreeting = nil function awake() local d = public.dialogue:lines() lineGreeting = d.greeting -- `d.greting` is reported here end function start() lineGreeting:say() end ``` ### When nothing is reported and you expected something From a call site, a type that is correct and a type that was never published look the same: no diagnostic either way. `require("@builtin::assetTypes.assetType.shared.refShapes").published()` answers which it is. It returns two maps — the category surfaces, and the per-asset results keyed by identity and then by method: ```lua local shapes = require("@builtin::assetTypes.assetType.shared.refShapes").published() shapes.categories.dialogue --> "{ lines: () -> any, lineNames: () -> { string } }" shapes.returns.Shopkeeper.lines --> "{ browsing: Line, farewell: Line, greeting: Line, wares: Line }" ``` An identity absent from `returns` was never published for, which is a different thing from published-and-correct — and the reason to look here rather than at the call site. The answers are recomputed when an instance is written, so a control added to a map reaches the checker with no restart. Only types that declare `refShapes` are read per instance, and at most 64 assets of one type are — past that the type keeps its declared return and the engine log names what was dropped. ## The instantiate hook (`M.ref.instantiate`) — a contracted return A type opts into becoming part of the scene by defining `instantiate` on its `ref` table. That is the whole opt-in: `ref:canInstantiate()` is true exactly when the hook exists, so consumers offer a scene path — an `Asset.source` field, a viewport drop, a tool argument — by CAPABILITY rather than by a list of type names. Unlike `inspect`, this hook's **return is a contract**. A caller writes one piece of code against every instantiable type, so what comes back cannot vary by type: ```lua -- behavior.luau local Instantiable = require("@builtin::assetTypes.assetType.shared.instantiable") local M = {} M.ref = { instantiate = function(self, target, opts) local root = Instantiable.root(self, target, opts) -- IN: the base opts -- ... compose whatever this type is, under `root`, NOW ... return Instantiable.result(self, root, idMap) -- OUT: the contract end, } return M ``` **IN.** `target` is an owning entity ref: the instance lands under (or, for a hierarchy type, onto) that owner. With no target the type spawns a fresh root. `position`, `rotation`, `scale`, `name` and `temporary` mean the same for every type — `Instantiable.root` applies them to a root you mint, `Instantiable.place` to one you adopt, so you never re-read the spec. Honour more opts of your own if your type needs them, and document them in the hook's `--!arg` docs. **OUT.** Return `(root, idMap)` through `Instantiable.result`: - **`root`** — the composed root, as an `EntityRef`. Composition is **synchronous**: everything your type builds is live when you return, so the caller can parent to it and read its components in the same statement. Do not defer the work to a component's `awake` and return an empty shell — a root that is not live is refused. - **`idMap`** — the `originalId -> runtimeId` map naming what you spawned, or nil for a type with no addressable children (`result` normalises it to `{}`). **A caller never receives nil.** A component that re-composes your asset on every load keeps this map and passes it back in, which is how a cross-entity reference into the composition survives a reload. `AssetRef` runs every `instantiate` through `result` on the way out whether or not your type called it, so returning something else fails at your own call rather than handing a caller a nil root. Calling it yourself is still how you say what you return, and running it twice changes nothing. `@builtin::assetTypes.assetType.shared.instantiable`'s README is the full reference for both halves. ## The inspect hook (`M.ref.inspect`) `asset.inspect(ref)` resolves `ref`, builds a common envelope shared by every asset (`identity`, `name`, `guid`, `source`, `typeName`, `typeDefinitionPath`, `scope`, `origin`, `description`, `tags`), then calls the resolved type's own inspect hook — `M.ref.inspect(self)` on `behavior.luau` — for the type-specific `detail`. The hook returns *only* `detail`; the framework fills in everything else: ```lua -- behavior.luau local M = {} M.ref = { inspect = function(self) -- self.path is the asset's own folder. Parse the asset's OWN -- files — source text, a native payload header, its `.metadata` -- — never runtime state (a live component instance, a GPU -- upload, a compiled schema): inspect must work on an asset that -- hasn't been compiled, uploaded, or registered yet. return { -- type-specific fields, whatever this type wants to surface } end, } return M ``` A type that omits `M.ref.inspect` yields the generic record: the envelope alone, `detail = nil`. That's a valid, working state — not an error — but it means agents calling `asset.inspect` / `tools.use("assets","describe", ...)` on an instance of the type see only identity and scope, none of what makes an instance of it meaningful. Declaring the hook is what makes a type's instances inspectable for what they actually are. A hook that raises leaves `detail = nil` and sets `record.warning` to the error text — `asset.inspect` itself never raises for a resolved ref. ## Discovery - `asset.list("assetType")` — every registered asset type. - `asset.inspect("<typename>")` — the type's identity, source path, and this README, plus its `about.yaml` texts as `detail.about`. - `asset.resolve("<typename>", "assetType")` — the `<typename>.assetType` asset itself (used by the validator to find the type's `type.yaml`). ## Related - `assetTypes/README.md` — the full `type.yaml` schema and validator rules. - `@builtin::assetTypes.assetType.shared.instantiable` — the instantiation contract's shared implementation, both halves. - Every other `*.assetType/` here — the concrete types built on this meta-type. ## The Inspector a type ships Every type names the file its Inspector sections come from with `inspector: { type: "inspector.luau" }` in its type.yaml. `asset.create("assetType", name)` scaffolds the block and an `inspector.luau` whose Contents section lists an asset's files, built from `ctx.parts`. `asset.validate` on a type that names none reports `assetType.inspector_required` (an error for a `@builtin` type the engine's library authors; a warning for a world's own, and for one the library carries by reference, which the world that published it answers for), and one whose file does not load `assetType.inspector_invalid`. ## In the Inspector Type: what the type.yaml declares (suffix, container, primary files, the settings and inspector blocks), whether the type ships a behavior, how many instances it has, and **Open** for its files. Schema: the settings every instance carries, as read-only typed controls at their defaults (a type whose schema is per instance says where it is declared). Instances: a link to each of the first 20 assets of the type, and how many there are when there are more.

# Module (asset type) A module is a reusable, stateless (or globally-stateful) Luau library that other code pulls in with `require()`. Modules are the unit of factored-out logic in a world: helpers, math libraries, format parsers, registries, shared algorithms. ## When to use one - You have logic you want to share across multiple components, services, scenes, or tools. - You have a registry, lookup table, or shared cache that callers all read from / write to. - You want a stable API surface (`M.fn`) other code can depend on. If the logic is bound to one entity, use a `.component`. If you want a named UI of fields rather than functions, use a `.preset`. ## Where it lives - Source: `/zero/source/.../<name>.module/` - Identity: the source path with `/` written as `.` and each segment's type suffix dropped — `/zero/source/demo/beats.module` is `demo.beats`, and `/zero/source/kit.package/beats.module` is `kit.beats`, the container's name kept and its `.package` suffix gone. `asset.create` returns this string, `asset.resolve(...).identity` reads it back, and the `require` forms below write it as `<identity>`. - Folder shape: - `init.luau` (or `init.lua`) — module body. **Required.** Returns a table (conventionally named `M`). - `README.md` — instance-level documentation. **Required.** - `.metadata` — agent-editable tags + free-form fields. **Required.** ## How to create one ```luau asset.create("module", "<name>") -- Creates: /zero/source/<name>.module/ -- init.luau (canonical `local M = {} … return M`) -- README.md (instance README template) -- `folder` places it in a subfolder of /source, and that subfolder -- leads the identity: `{ folder = "lib" }` produces `lib.<name>`. -- `into` authors it inside a resolved container (a package, a toolbox), -- whose own identity leads the same way: asset.create("module", "<name>", { folder = "lib" }) asset.create("module", "<name>", { into = asset.resolve("myPkg.package") }) ``` ## How it operates 1. **Registration.** Writing `init.luau` into a `.module/` folder indexes the asset and registers the module path with the resolver. 2. **Loading.** The first `require("<identity>")` runs the file's body and caches the returned table. Subsequent requires from anywhere return the **same table** — this is the shared-state lever for "module-local" registries. 3. **Hot reload.** Editing the file re-runs the module body and folds what it returns into the table already loaded, so that table keeps its identity: a caller that captured it with `require` reads the new source's functions and values through the reference it already holds, and a later `require` returns that same table. A key the new source drops goes away; a key something set at runtime stays. The body's own `local`s start again from their initial values, so state that must outlive an edit lives in `modules.state()` (`guides { path: "core/scripting-and-tasks" }`). 4. **Identity resolution.** A module is reached by its `<identity>`, and where the caller lives decides which spelling of it resolves. For a module in a **world**, from a caller in that same world — another module, a component, a scene entrypoint, or an `execute` chunk: - `require("<identity>")` — the identity on its own, resolved against the caller's own root. It carries every folder segment, so a module created with `{ folder = "demo" }` is `require("demo.beats")`. - `require("@root::<identity>")` — the same root-relative resolution, written out. - `require(".sibling")` — a module in the same folder, by its bare name; `..name` steps up one folder, `...name` two. Logs, stack traces and hot-reload notices name that same module `@local.source.<identity>` — its key under the world source root. The `<identity>` tail of that key is the form above, so a trace reading `@local.source.demo.beats` is `require("demo.beats")`. For a module in a **library** — content under `/zero/source/libs/@<lib>/` — `@<lib>::` addresses that library's root from anywhere: `require("@builtin::modules.transform")`. Mounting a world as a library moves its files under such a root and flips the caller root to `@<lib>::`, which is what keeps the root-relative forms above resolving across the move. ## Discovery - `asset.list("module")` — every registered module. - `asset.inspect("<name>")` — public functions, source path, this type README. - `ls /zero/source/<name>.module` lists the files the folder holds. ## Authoring conventions - Return a single `M` table from `init.luau`. Top-level statements with side effects run on first require — useful for one-time initialization, dangerous if they touch the engine before it's ready. - Write exported functions as `typed function`, not `function`: the argument types are enforced at the call and the checker knows the signature, so a caller's mistake is reported where they made it. - Annotate exported functions with `--!desc` / `--!arg` / `--!return` / `--!example` so the LSP, `tools.list`, and `asset.inspect` surface them. A function with no `--!desc` is reachable only by someone already reading this file. - Declare a VALUE with `Field.<kind>(default, mode, description)`, and a table whose members are reached through a metatable with `--!members <TypeName>` — the latter gives the surface its accepted member set, its type, and its documentation from one table. See `guides { path: "core/authoring" }` for all four rules and `modules/api/engine/entity.module/members.module` for a worked member table. - Keep module state in module-local upvalues or in `modules.state()`. Globals leak across reloads. Module-locals start again from their initial values with each hot reload; the table `modules.state()` returns is the same table on both sides of every reload. - Prefer focused modules over kitchen-sink modules. If two halves of a module have no shared state, split them. ## Common pitfalls - **Cyclic requires.** A `require` chain that loops will return the partial table (the half built before the cycle was detected). Design for one-way dependencies. - **Engine-time side effects.** Don't `entity.spawn` at module top-level — the engine may not be ready. Expose an `M.init` and call it from a scene entrypoint. - **Hot-reload + module-local cache.** A module that caches expensive computation in upvalues loses that cache on reload — fine for dev, but be aware in performance work. - **`init.lua` vs `init.luau`.** Either works, `.luau` is canonical. - **Writing one while play runs.** A `/source` write made while play is running lands on the play shadow, and a guarded play-exit discards it unless it is kept. One `.module` write shadows `init.luau`, the `README.md` and the `.metadata` together. `vfs.write(path, bytes, { durable = true })` skips the shadow, and `vfs.promotePlayShadow` keeps what is already on it — the `core/vfs` guide has the model and what each route costs. ## Related types - `.component` — for entity-bound state + lifecycle hooks. - `.service` — generates content you don't have yet (a mesh, sound, texture, …) via a metered provider. - `.tool` — for a single agent-callable function with a YAML schema. - `.package` — to group several modules + components + scenes into one shippable folder. ## In the Inspector Exports: what the module exports (name, kind, signature), parsed from its source without running it, with **Check** (the LSP's diagnostics for its entry file) and **Open**.

# proc Code-authored, graph-backed procedural generation for the Zero engine. A graph is one function of `g`: `proc.define(function(g) ... end)`. Nodes are called by family and name (`g.<family>.<name>({ ... })`), inputs are declared with `g:input(name, default, opts)`, the returned table is the graph's outputs, and `io.output` is how the graph stands in the world. `builder.module/README.md` holds every rule of that form. This module owns the whole procedural model: the graph builder + data model, the operation registry, the type system, the lazy cached evaluator, deterministic scoped hashing, and the node-family op implementations. Authored `.procGraph` graphs are persisted via `procGraph.assetType`; the `procgen.preview` / `procgen.spawn` operations live in `procgen.toolbox` and are invoked as tools: `use_tool` from an agent, or `tools.use("procgen", "preview", args)` from a script. Generated meshes/materials/textures/bundles are persisted through their own `.assetType`. An op family can also come from outside this package: a `.procPack` asset registers its ops in the same registry, called as `g.op.<id>(...)` exactly like the ones shipped here (`proc.registerPack(name, ops)` is what it registers through, and what a test or a tool calls to hold a family for the life of one VM). `terrain.*` is one such pack, shipped in `terrainSystem.package/procPacks/` and covering a whole landscape; `guides { path = "systems/terrainSystem/documentation/terrain" }` is its guide. To find out what the registry holds, use the `procgen` toolbox: `searchNodes` searches it and `describeNode` describes one node or op. `proc.search_ops(query)` and `proc.schema(id)` are the same answers in-process, for a graph builder looking something up while it runs.

# attribute Reading, writing and moving the per-element columns a mesh carries. The definitions live in `proc.ops.attribute`; this pack is what puts them in the op registry, so `procgen.searchNodes("", { pack = "attribute" })` lists the family and `procgen.describeNode("op.<id>")` describes any one of them. ## Ops - `attribute.set` - `attribute.labels` - `attribute.remove` - `attribute.transfer` - `attribute.statistics` - `attribute.normalize`

# assetType runtime The machinery that reads a `<typename>.assetType/behavior.luau` and turns its declarations into live behaviour. A `behavior.luau` is a table of declarations — `ref` methods, `modules` shared code, an `events` schema, a `namePattern`, `refShapes`, and the `onCreate` / `onRegister` / `onChange` / `onDelete` / `validate` / `settingsDefaults` / `settingsCorrections` hooks. None of it runs itself. This is the code that runs it, and it lives here because reading a type's declarations is the **assetType type's own behaviour** — the same way `material.assetType` owns what a `.material` does. ## Sub-modules | Module | Reads | Responsibility | |---|---|---| | `ref.module` | `ref`, `modules` | Builds every `AssetRef` envelope, attaches the shared metatable, and dispatches per-type methods and shared modules onto it. Also owns edit-mode write-behind persistence. | | `create.module` | `onCreate`, `namePattern`, `validate` | Backs `asset.create`: resolves the type, checks the name against its pattern, runs `onCreate` (or clones `template/`), and writes the instance. `validate.module` beside it checks a creation `opts` table against the type's `createSchema`. Before running `onCreate`, resolves the type's settings chain (below) and hands the result to the hook as `opts.settings`. | | `settings.module` | `settings`, `settingsDefaults`, `settingsCorrections` | A type's declared settings schema and where its values live (`type.yaml`'s `settings:` block). `Settings.resolveForCreate` layers the schema's own defaults, the type's own `settingsDefaults(name, opts, asked)` hook (a DEFAULT the schema can't express — a name-derived convention, a fact read off a payload the caller handed it, a value following a field `asked` shows a higher layer naming; any later layer overrides it), the Preset Manager, an importer's settings, the caller's `settings` table, then the type's own `settingsCorrections(values, name, opts)` hook (a CROSS-FIELD CONSTRAINT the schema can't express, applied last over the fully merged values). A correction over a default/preset/importer value lands silently; a correction that would override what the caller's own `settings` table explicitly asked for refuses the creation instead, naming the field and why. Neither hook is ever handed a table to mutate; each returns what it wants changed (`settingsCorrections` may also return a `{ [field]: reason }` table for that refusal message). `Settings.cloneValues` deep-copies a values table — `create.module` hands `onCreate` a copy, never the table it stamps. `Settings.valuesOf` / `writeValues` read and write an asset's own values file. | | `typeYaml.module` | `type.yaml` | The folder a type lives in and its parsed `type.yaml`, decoded once per content version of the file. `settings.module` and `inspector.module` read their blocks through it. `about` / `aboutAt` read a type's `about.yaml` (`intent`, `function`, `usage`), leaving out any key that is empty or still starts with `[[describe]]`; `aboutRows` and `aboutMarkdown` lay the texts out for the Inspector and the `types/<name>` guide. | | `inspector.module` | `type.yaml`'s `inspector:` block | Which inspector a type declares for its assets (`inspector: { type: ... }` or `{ instance: ... }`), and the declaration that file returns — the sections it adds, the generic ones it replaces, and their order — or the problem that kept it from loading. | | `onRegister.module` | `onRegister` | Fires an instance's once-only registration hook — on arrival, on world load, and for `@builtin` library instances. | | `changeDispatch.module` | `onChange`, `onDelete`, `refShapes` | Routes a VFS source write or a folder delete to the enclosing typed asset's type hooks. | | `refShapes.module` | `refShapes`, `ref` | Publishes what every `AssetRef<category>` answers to, so a member read on an asset-typed value is checked against that category's real surface. | | `events.module` | `events` | The per-asset event runtime behind `ref.events`. | | `instantiable.module` | `ref.instantiate` | The instantiation contract an asset type opts into: `root` stands the root entity, `place` applies the base placement opts to one the type adopted, and `result` shapes the `(root, idMap)` every `instantiate` returns. Also registers the `sceneInstantiable` field-constraint validator. | | `declaration.module` | `type.yaml` | The type's decoded declaration, read once and held until a write inside an `.assetType` folder; what every question about a type as a whole reads. | | `previewRecipe.module` | `type.yaml` `preview:` | How an instance's `preview.png` is produced: which of the four recipes (`instantiate`, `image`, `surface`, `custom`) the type declares, and what that recipe needs. | ## Reaching it ```luau local rt = require("@builtin::assetTypes.assetType.shared") rt.ref.loadTypeBehavior("material") ``` Fields resolve lazily. The prelude requires the sub-modules directly, in dependency order (`ref`, then `changeDispatch`, `onRegister.install()`, `refShapes.install()`) — a table that required all six on load would take that ordering away from it.

# Package (asset type) A package is an asset — a `<Name>.package/` folder that bundles components, modules, scenes, presets, tools, and any other typed sub-assets under one identity, installed into a world as one unit. Packages are how authoring sets get distributed across worlds. A **library** is the addressable root scope content resolves under (`@builtin`, `@<name>`) — a whole world mounted into this one under a namespace, via `zeromind.installLib` / `world.installLibrary`. A package is an asset that lives inside such a root, and one library holds as many packages as its author put there. A package is installed by guid the way every asset is (`zeromind.install`, `zeromind.installAsset`). ## When to use one - You're authoring a coherent feature suite (character controller stack, voxel engine, UI kit, animation library) and want to ship it as one install target. - You want a stable identity worlds can install and resolve sub-assets against (`@<lib>::pkg.sub_module`). - You want versioning + a per-package metadata layer that travels with the contents. If you're authoring inside a single world and don't need a separate install lifecycle, you don't need a package — drop your `.component` / `.module` / etc. directly in `/zero/source/`. Packages are for cross-world distribution. ## Where it lives - Source: `/zero/source/.../<Name>.package/` (or, for legacy packages, a folder containing `package.yaml` at its root). - Identity: `<Name>` (the `.package` suffix collapses in identity — mirrors `.module`). A file at `<Name>.package/<sub>/init.luau` resolves under the same identity it would at `<Name>/<sub>/init.luau`. - Folder shape (container-style — open child set): - `package.yaml` — metadata (name, version, description). **Required.** - `README.md` — instance documentation. **Required.** - `.metadata` — agent-editable tags + free-form fields. **Required.** - Sub-asset folders: any combination of `.component/`, `.module/`, `.scene/`, `.preset/`, `.tool/`, `.toolbox/`, `.material/`, `.shader/`, etc. The validator permits unlisted children (`allow_unlisted: true`) by design — packages are open containers. ## How to create one ```luau asset.create("package", "<Name>") -- Creates: /zero/source/<Name>.package/ -- package.yaml (metadata scaffold) -- README.md (instance README template) -- `folder` places it in a subfolder of /source instead of the root: asset.create("package", "<Name>", { folder = "systems" }) ``` Then scaffold sub-assets inside it: ```luau local pkg = asset.resolve("<Name>.package") asset.create("component", "Spinner", { into = pkg }) asset.create("module", "util", { into = pkg }) ``` ## How it operates 1. **Registration.** Writing `package.yaml` indexes the package with the package registry. 2. **Install.** A package is installed by guid, the way every asset is: `zeromind.install` from the shared library, or `tools.use("zeromind", "installAsset", <guid>)` inside the engine. The install writes the package's files (and the deps its `.refs` record) into this world's source, so its sub-assets resolve here. `tools.use("zeromind", "preview", <guid>)` reports what an install would write before it writes anything. 3. **Sub-asset resolution.** Because `.package` collapses in identity, sub-asset paths work whether the package folder is suffixed (`<Name>.package/<sub>`) or not (`<Name>/<sub>`). 4. **Updates.** `tools.use("zeromind", "updates")` lists installed content with upstream changes available; re-running the install pulls them. 5. **Metadata.** `package.yaml::name` overrides the folder stem if present (rare); `version` + `description` are surfaced in the package index. 6. **Hot reload.** Edits to sub-assets hot-reload as normal; edits to `package.yaml` reload package metadata. ## Discovery - `asset.list("package")` — every registered package. - `asset.inspect("<name>")` — sub-asset catalog, source, this type README. - `ls /zero/source/<Name>.package` lists the files the folder holds. - `library.list()` — the library assets registered in this world, including the ones packages under an installed library contribute. ## Authoring conventions - Name packages by their feature (`voxels`, `cameraRigs`, `dialogSystem`), not by their owner — the host library is the `@<lib>::` scope prefix. - Cluster cohesive sub-assets together. A "character controller" package should ship the controller component, its preset configs, its supporting modules, and a demo scene — not just the component. - Document the package's surface in `README.md` — what install installs, what each sub-asset does, how they relate. Agents reading `cat /zero/source/<Name>.package/README.md` get the full picture in one shot. - Version conservatively — breaking a package means breaking every world that installed it. Use semantic version bumps. ## Common pitfalls - **Missing `package.yaml`.** Without it the folder isn't recognized as a package even if it has a `.package/` suffix. - **Dependency installs.** A package that depends on another package must declare it (in `package.yaml::dependencies` once supported) and the parent world must install dependencies in order. - **Identity collapse.** Sub-asset paths skip the `.package` suffix. Don't include `.package` in `require` strings. ## Referencing inside a package: the `~` rule `~` means **this package**, resolved structurally from the referring file's own location. It is the only package-specific syntax. It is rename-safe (no package name is ever written) and library-agnostic (it never names the host library, so it survives `@builtin` being renamed or the package being mounted elsewhere). `~.tail` maps to `<pkg>.package/tail` from anywhere inside the package. | Referencing from | Use | Example | |---|---|---| | An asset/module **inside this package** | `~.tail` | `require("~.modules.myThing")`, `shader: "~.shaders.myThingBlend"` | | A **different package** under the same root | root-relative identity | `require("@root::systems.otherPkg.modules.x")` | | A **different library's** public API (a deliberate external dependency) | `@otherlib::…` | `require("@physics::modules.rigidbody")` | **Never write `@builtin::` (or any host-library name) to reference your own package** — that couples the package to the library it currently lives in and breaks if the library is renamed or the files move. Use `~.`. It works from Luau `require()` and from asset-reference strings in data files (a material's `mat.yaml` `shader:` field, a component's default asset ref); the engine resolves it against the referring file's own package. `asset.resolve` takes a `~.` name the same way, against the package of the file that calls it: `asset.resolve("~.materials.myThingStandard", "material")`. `~.` is the package-relative self-reference; `@root::` is the root-relative one (the library root, or the world source tree for non-library content). The `core/requiring-modules` guide covers the root model in full. A package that ships substantial functionality should include a `.guide` asset (a `<name>.guide/guide.md` folder anywhere under the package); the `guides` tool discovers it live, so collaborators find the system the way they find built-in guides. A package's test suite reaches the shared `Test` framework through its enclosing asset: `local Test = asset.containing(__FILE__).modules.shared` (`asset.containing` returns the deepest enclosing typed asset, the `.testSuite`, not the outer `.package`). ## Related types - Any of `.component`, `.module`, `.scene`, `.preset`, `.tool`, `.toolbox`, `.material`, `.shader`, `.style`, `.service`, `.importer` — packages bundle these. ## In the Inspector Package: the name, version and description package.yaml declares, how many things the package holds and what they are, and **Open** for package.yaml. A package.yaml that does not decode is listed under Problems with the decoder's error.