crashCars
Crash-test cars whose bodies crumple and stay crumpled. There are nine cars (city car, hatchback, family saloon, estate, SUV, pickup, sports coupe, people carrier and a 1960s steel saloon), each in three looks (realistic, toy, low-poly). A car is a real `WheelCollider` chassis. I…
crashCars
Crash-test cars whose bodies crumple and stay crumpled. There are nine cars (city car, hatchback,
family saloon, estate, SUV, pickup, sports coupe, people carrier and a 1960s steel saloon), each in
three looks (realistic, toy, low-poly). A car is a real WheelCollider chassis. Its cabin has
seats, a dash, a steering wheel, a toe board, a firewall and door rings that a crash dummy can sit
in and hit. The body is a car-shaped soft-body shell whose crush zones keep their dent. The bumper
and bonnet slide and fold with the crush, then tear off as loose bodies. Every piece is synced, so
every player sees the same car, the same dent and the same panels flying.
The crash load follows a per-face lane model of the car's structure, with a force law tuned per
model. Into a rigid wall a hatchback crushes about 0.2 m at 30 km/h, 0.65–0.75 m at 50 km/h and
1.1–1.25 m at 70 km/h. The energy its structure absorbs (energyJ) comes out at the car's ½mv².
Install
Install the package crashCars from ZeroMind. It lands at /source/parts/crashCars.package, or
wherever you install it. Require it by its bare name:
local Cars = require("crashCars.cars")
It depends on nothing but the engine.
First example
Paste this where only one peer runs it, during play: an execute call, a host-only scene
onHostLoad, or behind multiplayer.isHost(). It lays down a floor and a static wall whose face
is the plane z = 0, spawns a hatchback 12 m up the lane and tows it at 50 km/h. It lets go 1 m
before the wall, then brakes and prints what the crash did.
--!strict
local Cars = require("crashCars.cars")
local cube = asset.resolve("cube", "mesh")
local floor = entity.spawnSynced("TestFloor", { position = { 0, -1, 0 } })
floor.localScale = { 12, 2, 40 } -- top surface at y = 0
floor.component.add("Model", { model = cube })
floor.component.add("BoxCollider", { friction = 0.8 })
-- a rigid wall: no Physics body, so it is static; its face is the plane z = 0, facing +Z
local wall = entity.spawnSynced("TestWall", { position = { 0, 1, -1 } })
wall.localScale = { 4, 2, 2 }
wall.component.add("Model", { model = cube })
wall.component.add("BoxCollider", {})
-- the car faces -Z (forward) and comes from +Z
local car = Cars.spawn({ model = "hatch", look = "realistic", position = { 0, 0, 14 }, yaw = 0 })
assert(Cars.whenReady(car, 5), "car shell did not build")
car.component:track(true, "front")
local v = 50 / 3.6
local towing = true
local stop = Physics.onBeforeStep(function()
if not towing then
return
end
local bumperZ = car.chassis.position.z - car.frontOffset
if bumperZ <= 1 then -- let go 1 m before the wall
towing = false
return
end
Cars.setVelocity(car, 0, 0, -v) -- tows chassis and shell together
end)
task.wait(2)
stop()
car.component:brake(6000)
local c = car.component:settle("front")
print(("crush %.2f m max / %.2f m mean, peak %.0f g, structure absorbed %.1f kJ, off: %s"):format(
c.max, c.mean, car.component.peakForceN / (car.spec.mass * 9.81), car.component.energyJ / 1000,
table.concat(car.component.detached, ", ")))
It passes the strict checker and runs. A hatchback at 50 km/h crushes 0.55–0.75 m at 24–28 g peak, and
bumper, bonnet come off. Its structure absorbs about 115 kJ of the 120.6 kJ ½mv² by the moment it stops. Read the open issues under Known limits before you trust
the numbers after the stop.
examples/carsDemo.scene is the same test as a scene: a hall floor, a concrete wall, a camera and the
CarsDemo component (examples/CarsDemo.component). The component runs one real car on the host only
and prints the result. Beside the lane, examples/carsDemoLineup.module stands one car of every
model as a still picture: meshes only, no physics. Use it for a showroom or menu instead of nine
simulated cars.
Gallery
examples/carsGallery.scene is a showroom of the whole catalog: every model in every look, a 9 × 3
grid of 27 cars (models in catalog order left to right; realistic, toy and low-poly rows front to
back). Each car stands on a plinth with a name placard in world-space text (Text3D), such as
"Family saloon · Toy", and each row has its look as a header. It is visual only, built with
carsDemoLineup: no physics, no soft bodies, no CrashCar. Its camera (galleryCamera) frames the
whole grid.
Open it from the Scenes list in the editor, or in Luau with layers.load("crashCars.examples.carsGallery")
(a root load replaces the open scene; pass { additive = true, origin = { x, y, z } } to set it
beside your own scene instead). Its build.luau lays the grid out from Cars.catalog() and
Cars.looks(), so a new model or look shows up on the next build.
The package's regression suite is crashCars.testSuite: run it in edit mode with zero tests run crashCars.
API
Cars.spawn(opts) -> Car
| option | meaning |
|---|---|
model | catalog id (below). Default "hatch" |
look | "realistic" (default), "toy", "lowpoly" |
position | {x, y, z} or {x=, y=, z=}: on the ground under the middle of the car |
yaw | radians about +Y. 0 = the car faces −Z |
synced | true (default): every piece is spawned with entity.spawnSynced, so call it on ONE peer. false for a local-only car |
name | chassis entity name (default CrashCar_<model>); the shell is <name>_shell |
Car handle (also rebuilt on any peer with Cars.fromChassis(chassisId)):
id,chassis: the chassis entity id and entity (dynamicPhysics, fourWheelColliders, the cabin colliders, theCrashCarcomponent).shell: the soft body shell's entity id (a separate root entity held to the cabin).parts = { bumper, bonnet }: the panels' entity ids while they are attached (children of the chassis). Once they come off,component.looseBumper/looseBonnethold the loose bodies.spec = { id, name, class, mass, length, width, height, wheelbase, frontOverhang, crushable },derive(car-local stations, seespecs),structure(seeCars.structure),model,look.component: the chassis'CrashCarcomponent.wheels: the four wheel entity ids.frontOffset/rearOffset: metres from the chassis origin to the front face (bumper) along forward, and to the rear face along back. The bumper's world position along the lane ischassis.position.z - frontOffsetfor a car facing −Z.
Children of the chassis that a dummy or a rig uses, named exactly:
seat_driver,seat_passenger,seat_rear_left,seat_rear_right: H-points (the hip joint centre of a seated occupant), facing forward. The rear seats are absent on the pickup.belt_seat_<seat>_lapOuter,_lapInner,_shoulder,_buckle: belt anchor points.steering_wheel: centre of the rim (its collider iscol_steering_wheel).
Everything else in Cars:
| call | what it does |
|---|---|
Cars.catalog() | { {id, name, class, mass, length, width, height, wheelbase} } |
Cars.looks() | { {id, name, description} } |
Cars.spec(id) | the raw spec table from specs (nil for an unknown id) |
Cars.derive(id) | car-local stations: axles, windscreen, firewall, roof end, H-points, steering wheel centre |
Cars.structure(m) | the structure of a spec m: frontG/rearG/sideG = {g at 0 crush, g at 85 % travel}, frontTravel/rearTravel/sideTravel (m), face positions, shell zone settings |
Cars.crushForce(m, S, x, face) | crush force (N) of a whole face at crush depth x m. face = "front", "rear" or "side" |
Cars.whenReady(car, timeout?) | yields until the shell is built (default 5 s); returns true/false |
Cars.fromChassis(id) | the handle, read back from a chassis id (any peer) |
Cars.despawn(car) | removes the chassis, shell and any loose panels |
Cars.setVelocity(car, vx, vy, vz) | sets chassis and shell velocity (world m/s): how a tow or launcher drives the car. Simulating peer only |
Cars.worldToLocal(e, p), Cars.localToWorld(e, l), Cars.localDir(e, l) | frame helpers for any entity (arrays in, {x,y,z} out) |
Cars.GROUPS | collision bits: shell = bit 20, dummy = bit 21. Put a dummy's colliders in bit 21 only: the shell fills the car's volume and is filtered against that bit |
Cars.mesh(model, look, part), Cars.material(name) | the package's authored mesh and material refs |
The CrashCar component (on the chassis)
Methods (the ones that write are for the simulating peer):
:measureCrush(face?)→{ max, mean, lanes = {a, b, c}, left, centre, right }, in metres, for"front"(default),"rear","left"or"right". On the owner it reads live values. Other peers read the syncedlanes, updated every 0.1 s.:worstFace()→face, depth.:track(on, face?): while on, keeps the deepest crush offaceincrushMax. Switching it on resetscrushMax,energyJandpeakForceN.:settle(face?): stores the current crush incrushResidualand returns it.:setExclude(ids): bodies the lanes look past, for example a dummy's bodies or a rig's props.:brake(torque?): clamps every wheel's brake (default 6000 N·m);0releases it.:repair(): back to the built shape and forgets the crush. Panels that came off stay off.
Synced fields: crushMax, crushResidual, lanes, energyJ (J), peakForceN (N), detached
({"bumper", "bonnet"}), looseBumper, looseBonnet, ready, and the tunables reboundShare
(0.06), bumperOffAt (0.26 m), bonnetOffAt (0.38 m) and shapeZones (true).
Events: onPartDetached { part } and onImpact { face, speed, target } (closing speed in m/s at
first contact, and the entity id of what the face met).
car.component.events.onImpact:connect(function(e)
print(e.face, "hit", e.target, "at", e.speed * 3.6, "km/h")
end)
Catalog
Mass in kg, sizes in metres. Front law is the crush force as deceleration of the whole car, from first touch to 85 % of the crush travel. Past 85 % the structure bottoms out and stiffens sixfold.
| id | name | class | mass | length | width | height | wheelbase | front law | front travel | seats |
|---|---|---|---|---|---|---|---|---|---|---|
city | City car | A-segment city car | 950 | 3.60 | 1.64 | 1.50 | 2.40 | 15–42 g | 1.01 m | 4 |
hatch | Hatchback | C-segment hatchback | 1250 | 4.10 | 1.78 | 1.46 | 2.62 | 15–42 g | 1.23 m | 5 |
saloon | Family saloon | D-segment saloon | 1450 | 4.75 | 1.82 | 1.45 | 2.80 | 15–42 g | 1.39 m | 5 |
estate | Estate | D-segment estate | 1550 | 4.80 | 1.82 | 1.48 | 2.80 | 15–42 g | 1.40 m | 5 |
suv | SUV | mid-size SUV | 1850 | 4.60 | 1.88 | 1.70 | 2.75 | 17–48 g | 1.22 m | 5 |
pickup | Pickup | full-size pickup | 2100 | 5.30 | 1.90 | 1.80 | 3.20 | 19–53 g | 1.23 m | 5 (2 seat frames) |
coupe | Sports coupe | 2+2 sports coupe | 1500 | 4.40 | 1.85 | 1.30 | 2.55 | 16–44 g | 1.50 m | 4 |
mpv | People carrier | MPV / minivan | 1750 | 4.80 | 1.88 | 1.75 | 2.95 | 15–42 g | 0.84 m | 7 (4 seat frames) |
classic60s | 1960s steel saloon | 1960s body-on-frame saloon | 1300 | 4.60 | 1.75 | 1.42 | 2.70 | 39–109 g | 0.92 m | 5 |
classic60s has a stiff, short front and a weak cabin (front = 2.6, cabin = 0.45): it stops
harder, and its passenger cell deforms more. Rear faces use 12–34 g and sides 8–30 g, the side
travel growing with cabin strength. Seat frames are the seat_* children: driver and
passenger, plus rear_left and rear_right on every model but the pickup.
Looks
The look changes how a car is drawn, never its physics.
| id | name | what it looks like |
|---|---|---|
realistic | Realistic | Smooth production body, metallic paint, crash-test target stickers |
toy | Toy | Rounded glossy plastic, saturated colours, chunky wheels |
lowpoly | Low-poly | Faceted flat-shaded body in a flat palette |
Each model has its own paint per look. Paint is baked into the meshes' vertex colours and drawn
through white PBR materials (materials/body_<look>, trim, wheel, windscreen).
How the crush works
- Lanes. Each face (front, rear, left, right) is three lanes. On the simulating peer, every
physics step, rays from inside the body find what stands in front of each lane. They see any
collider and soft-body surfaces. Where a lane's face meets something, the car is pushed back
with that lane's third of
Cars.crushForce(m, S, depth, face). If the obstacle is dynamic or soft, it gets the opposite force. A pole meets one lane, an offset barrier one side, a wall all three. - Force law. In g of the car's weight, the force rises linearly from the first value of
frontGat no crush to the second at 85 % offrontTravel, then stiffens to 3x (1 + Cars.BOTTOM_OUT) as the crumple zone bottoms out and the cabin structure takes over. Hit faster than 70 km/h, every lane resists harder byCars.DYNAMIC(strain rate, more members folding at once): 1.5x more per 15 m/s above 19.5 m/s, so a 120 km/h car is stopped by its crumple zone (1.39 m, 39 g mean) rather than by its cabin. - Never more than stops it. The force is capped so it never more than stops the closing speed
in one step. When the face stops against the obstacle, it gives back
reboundShare(6 %) of the impact speed, the way crushed metal does. Against a moving body (a parked car, a moving barrier, a loose panel) the cap uses the two masses together, so a light thing is not flung off. - Depth. A lane's crush depth only grows: it is how far the obstacle has moved into the face.
- Energy.
energyJis the work the crush forces did on the closing motion, which is the energy the car's structure absorbed. It is this part's own model: soft bodies don't report absorbed energy (#20539). - Shape. The shell's crush zones take the lanes' depths.
Physics.setSoftParticleswrites their positions and their rest shape, so the dent stays, and it replicates to every peer like any soft-body dent. The folds bow the sides out and the top up where the metal packed. - Panels. While attached, the bumper slides back with the mean crush and the bonnet folds up
from its hinge. The bumper comes off past
bumperOffAt(0.26 m), or when one side is crushed 0.12 m deeper than the other. The bonnet comes off pastbonnetOffAt(0.38 m). Both become loose synced bodies thrown off the car.
Measured through crashRig (hatchback, belted 50th-percentile adult, 2026-10-26).
Version 0.3.2, family saloon, belted 50th-percentile adult (classic), bollard, tow, two runs at each speed (head = peak, chest = 3 ms clip):
| speed | crush | car pulse (peak / mean) | head | chest | with front airbags: head / chest |
|---|---|---|---|---|---|
| 30 km/h | 0.36 m | 12 / 9 g | 28 / 26 g | 14 / 13 g | 25 / 14 g |
| 50 km/h | 0.82 m | 16 / 11 g | 40 / 37 g | 22 / 20 g | 43 / 20 g |
| 70 km/h | 1.28 m | 29–30 / 16 g | 63 / 58 g | 38 / 36 g | 54 / 29 g |
| 90 km/h | 1.30 m | 59 / 28 g | 349–413 g (see below) | 61–63 g | — |
| 120 km/h | 1.39 m | 89 / 39 g | 600+ g (see below) | 195–360 g | — |
From 10 to 70 km/h every channel rises with speed and two runs agree within 8 %. Above about 80 km/h the car's own numbers (crush, pulse) stay believable, but the dummy's head reading does not: its neck runs into its joint stop and the head whips into it in one physics step. A stiffer neck made the solver diverge at 70 km/h, so it was left as it is; the head reading above 80 km/h is the dummy model's limit, not a measurement.
Earlier the same day, with seat foam and a padded wheel but no positioning hold, door foam or load limiter (hatchback, bollard):
| test | crush | car pulse (peak / mean) | head | HIC15 | chest 3 ms | energy |
|---|---|---|---|---|---|---|
| bollard 30 km/h | 0.35–0.36 m | 12 / 8–9 g | 26 g | 40–46 | 12–13 g | 43 kJ |
| bollard 50 km/h | 0.79 m | 17 / 11 g | 45–56 g | 157–250 | 22–30 g | 120 kJ |
| bollard 70 km/h | 1.14–1.15 m | 46–51 / 19–21 g | 97–125 g | 1007–1192 | 49–57 g | 235 kJ |
The rows below were measured earlier the same day, before the seat foam and the padded wheel; rear hits and 64–70 km/h frontal hits read higher on the head and chest then (rigid seat backs, rigid wheel).
| test | crush (max) | car pulse (peak / mean) | head | chest 3 ms | panels | energy |
|---|---|---|---|---|---|---|
| rigid wall 30 km/h | 0.21–0.22 m | 20 / 12 g | 16–32 g | 21–22 g | stay on | 43 kJ (= ½mv²) |
| rigid wall 50 km/h | 0.50–0.52 m | 24–29 / 16–19 g | 23–31 g | 27–31 g | bumper + bonnet off | 120 kJ |
| rigid wall 56 km/h | 0.57–0.61 m | 27–42 / 15–19 g | 34–67 g | 29–40 g | bumper + bonnet off | 145–149 kJ |
| rigid wall 70 km/h | 0.70–0.83 m | 38–69 / 23–27 g | 33–177 g | 40–73 g | bumper + bonnet off | 226–234 kJ |
| offset barrier 64 km/h | 0.75 m (0.66 on the far side) | 34 / 21 g | 86 g | 38 g | bumper + bonnet off | 186 kJ |
| small overlap 64 km/h | 1.21 m on the struck side, 0.19 on the other | 64 / 20 g | 114 g | 61 g | bumper + bonnet off | 193 kJ |
| side pole 32 km/h (side-impact dummy) | 0.25 m, the pole's lane only | 38 / 19 g | 53 g | 44 g | — | 47 kJ |
| rear moving barrier 50 km/h | 0.29 m | 13 / 8 g | 21 g | 24 g | — | 70 kJ |
Crush, car pulse and energy rise steadily with speed and repeat within a few percent. The head reading varies more from run to run, as in real tests without an airbag: it depends on whether the head strikes the steering wheel.
Multiplayer
- Spawn on one peer (the host or the test rig's authority).
Cars.spawnusesentity.spawnSyncedfor every piece, so other peers receive the car and never spawn their own. - The car simulates on the peer that spawned it. Only that peer runs the lanes and may call
anything that writes physics:
Cars.setVelocity,:brake,:track,:settle,:setExclude,:repair.Physics.*writes only work on the simulating peer. - The dent replicates natively as soft-body particles. The chassis and loose panels replicate as
poses. The crush numbers replicate through the component's synced fields.
measureCrushon a replica reads them, up to 0.1 s behind. - Every mesh and material is an authored asset inside the package, so every peer draws the same
car. Regenerate the meshes in edit mode after changing
specsorshape, withrequire("crashCars.build").all(); require("crashCars.build").refs().
Known limits
- Wheels have no volume and can't come off (engine issue #20543). They are
WheelColliders, so a wheel hit is a hit on the body. - Soft bodies don't report the energy they absorbed (#20539), so
energyJcomes from the lane model, not from the shell. - A kinematic body covers a frame's motion in its first step (#21187). If a rig drives a car
kinematically, its first contact lands a frame early. Tow it as the dynamic body it is, with
Cars.setVelocityevery step, as the example does. - The crush is a lane model, three lanes per face. A narrow pole crushes a whole lane's width (about a third of the car).
- Two lane-model cars: in a car-to-car side hit, each car's own lanes push, so the two forces add.
- Rays need a surface: the lanes only see an obstacle that has a collider or a soft-body surface. A mesh with no collider is passed through. Give a pole a pole-sized collider: a convex hull round a pole and its frame is as wide as the frame.
- Side tests: spawn the car with
noTrim = "left"(or"right") for the struck side. The door trim that stops the occupant in other crashes is rigid, and an obstacle that accepts every collision group would stop dead on it. - The shell touches nothing. It is skin: light (3 % of the car), held to the cabin, shaped by
the lanes. It has no underside and no surface round the wheel arches, because a
WheelCollider's ray reads no collision filter and would stand the wheel on its own body. - Don't despawn a car's child colliders during play. A collider removed from a synced body that way was seen to stay in the physics world under a dead id until the whole car was despawned.
Seats, foam and the steering wheel
Cars.seatLayout(m)lists each seat (driver,passenger, andrear_left/rear_rightwhere the model has them) with its seat back and head restraint, and for the driver the steering wheel. Each pad is{ face, n, up, rigid, halfX, halfUp, foam }in the car's frame:faceis the foam surface,npoints out of it, andrigidis the centre of the rigid frame behind it. The seat back leans back 23°, the torso angle crashDummies seats at; nothing stands behind the rear bulkhead, where the rear crush zone is.Cars.FOAMholds the pad depths (m) and spring-damper rates: seat back 8 cm, head restraint 6 cm, wheel hub on a collapsing column 10 cm.- Every pad (foam, wheel column, door, airbag) is an explicit spring-damper applied once a physics step, so its stiffness and damping are capped by the step and the body's mass (k·dt²/m <= 1.6, c·dt/m <= 1.1): at the world default of 30 steps a second the pads stay stable, and at 60 every pad is exactly as tuned.
car.component:setOccupants(bodyIds)registers an occupant's rigid bodies. Each step the foam pushes them out alongn(k·penetration + c·closing speed) and the car takes the reaction. Owner only.car.component:fitSeats()sets the seat up for the settled occupant, as a test lab does: the back's foam to touch the torso (5 mm preload), the head restraint to a 4 cm backset. Call it after the occupant settles.car.component:padState()reports each body's gap to its pad and the peak foam force (debug).Cars.GROUPS:shell,dummy,carBody(every collider of a car's body) andpanel(a loose panel, which leavescarBodyout of its filter so it never touches its own car). Collision groups apply per rigid body, not per child collider.- Frontal airbags (
Cars.spawn{ airbags = true }, CrashCar fieldairbags): the driver's bag fills out of the wheel hub, the passenger's out of the dash. They fire 15 ms after a frontal hit closing faster than 4.2 m/s (15 km/h), fill in 30 ms, hold 100 ms, then vent over 120 ms;airbagFiredMssays when they fired (-1: not). While a bag stands it pushes on each occupant body that meets it with a near-steady gas pressure over the body's area plus a vent-flow term on its closing speed (Cars.AIRBAG), and gives back little on the way out. The bag is drawn as a white cushion (a synced childairbag_<seat>) and stays draped after it vents. - The door's inner trim beside each front occupant is foam too (
doorpad, sill to window frame), and the steering wheel has no rigid collider: hub, collapsing column and rim are one pad that bottoms out on a stiff spring (kWheelBottom), so nothing the occupant meets is met in a single physics step. - A cramped rear bench (city car, coupe 2+2) keeps its foam where the occupant sits and leaves out the rigid
seat-back frame, so nothing rigid stands in the rear crush zone (
seat.noRigid).
After a test
car.component:park(true): the lanes stop, so the dent stays exactly what was measured and nothing the car rests against (the wall, a replay ghost) can push it. The seat foam keeps holding the occupant.park(false)orrepair()resumes. crashRig parks the car as soon as it has taken its readouts.- The lanes look through a soft body that collides with nothing (
collisionFilterorcollisionMemberships0), such as a replay ghost: rays meet every soft surface, whatever its collision groups. - A car on WheelColliders doesn't sleep, even standing still, so its shell never "comes to rest" either.
Scoped to this part · feeds back into the world's score.