The House Wears a Face
Commits
Every published commit of this world, on every branch, newest first.
8e7f3baa4ashots: seven stills from the current cut of the filmd9f214bbffverify: shot 12 is printed against the room the fall leaves, and the mix keeps three decibels of headroom051adfbd6dverify: the 85 mm inserts resolve, shot 13 clears the wreck, shot 12 is printed for the room the fall left, and the mix keeps its headroom7157a3eb4cstaging: the spec says which side of shot 5 the mirror wall lands on
The dolly runs east and the head turns north to the mirror wall, so the mirrors
fill the LEFT two thirds of frame and the mask wall runs off the right edge.
Proved from the running timeline at the end of the dolly: live_s05b.96b0294583air: the exterior rain tuned against the print, and no gap at the top of a take
Rain that reads at the graded print rather than at the raw buffer. The curtain
runs 3200/s of 2.8-4.8 cm drops at squash 9 and brightness 1.20 over a 22x18 m
box; the near sheet 260/s of 5.0-8.2 cm drops at squash 13 and brightness 1.80
three metres off the lens. Anamorphic bloom catches every additive streak, so
the first pass's 4200/s at squash 11 was a whiteout through the chain while
reading correctly with the chain off.
Shot 1 at t=3.0: two captures 11.0 s apart from the parked station differ by
14.75 mean luma against a 4.25 floor measured with the air off, and the air's
whole contribution to the frame is 23.36. Shot 2 at t=10.0: 14.93 against a
floor of 0.094.
AirClock re-states every emitter rate for twenty frames after a resetFilm. A
component rebuild is a deferred mutation, so an emitter demo.air.reset() asks
for arrives a frame or two later carrying rate 0 while the clock remembers
pushing the rate to the component that went away — up to three quarters of a
second of shot 1 with no rain in it.0cbb76ab40staging: the schedule reaches the room, the extras are all handled, and the mix stops clipping
FaceRig calls the hall rig with colons, so the four curves it evaluates every
frame reach HallFaceRig, HallEye and HallFloorChew instead of raising. A value
it writes is recorded as applied only once the rig has taken it, so a refusal is
retried on the next frame rather than leaving the room a shot behind, and the
complaint is made once per value instead of once per frame. FaceRig, FilmClock,
FilmMix and DemoEars declare their report methods on public:, so the callers
that read them get an answer.
Every extra cue is declared once and every one of them is handled. b04_boxstops,
b08_cutin and b14_dark are gone: nothing listened to them and they warned on
every take while describing things the film does not do. b11_impact moves to
K.IMPACT and its sub becomes b11_sub on the film clock rather than a wall-clock
delay. b14_eyesclose gains a real handler, which is the house taking its own
weight as the shutters travel.
The mix levels are measured now, not chosen. Fired alone into a silenced master,
the thunderclap peaks about eight decibels above the fall at the same gain,
which is why the impact clipped for four seconds in the delivered cut. The four
claps sit under the impact, the film runs with two decibels of master headroom,
and the storm does not return to its Act I level after the fall: the whole
hundred seconds now records at max_volume -4.2 dBFS with not one sample at full
scale, where it was 0.0 dBFS and 2058 samples. Shot 8 gains a second, short
ranged calliope under the dressing-room floor, which lifts 48-56 s from ten
decibels under its neighbours to level with them, and ensureSources() stands up
any source the scene was built without.
Shot 3 ends at z = -19.5 instead of -17, because K.STATION stands at z = -16 in
this same hall and a push that arrives any nearer is the shot-6 frame with a
different lens. Shots 1, 5, 7, 9, 10 and 11 are restaged as the spec's shot list
reads. film.module reads every duration and shot 8's cut-in from the shot table,
and refuses to load if the eighteen camera moves stop summing to a hundred
seconds.
READMEs for all eight modules and components in this slice.99043d1d71look: the print solved against the room, and the red kept out of the pink
The exposure response of a frame to a stop of trim is not a constant - it
runs from 1.2x for a frame already on the shoulder to 8x for one in the toe -
so each shot's trim was solved from its own measured response rather than
from a slope. Over shots 1 to 13 the delivered medians now run 47 to 70
(a spread of 1.49, against 2.86 before), no shot clips a pixel, and the two
cuts that jumped two stops - shot 3 to 4 and shot 8 to 9 - are flat.
- The fall's light loss is taken back off INSIDE shot 11 and handed over
again by shot 12, so the frame after the impact is darker than the frame
before it, which is the reading of the beat.
- Shot 8's 85 mm cut-in on the glass carries its own trim for the second and
a half it is on screen: a dark subject at close range inside a shot printed
for the room behind it.
- The grade's chroma gate opens earlier and harder, and a hit that arrives
with more blue in it than green has that blue taken back out - cadmium has
none. The curtain's dominant mode goes from R/G 2.00 to 2.38 and the red's
share of the frame from 29% to 9%, which is the share the film allows it.
- The tone curve keeps a highlight's hue almost all the way up: this film has
three saturated sources and each is meant to hold its colour into its core.
- reinstall() drops the grade cube, so an edit to the grade reaches the frame.0b413b738bair: point the ParticleEmitter note at the issue that was actually filed
The round trip that drops a built scene's grouped emitter init keys is
OrigoZero/zero#12887. The previous commit's body and these two files named
#12889, which is a different issue.3c8b460f95look: the eye discs keep their hue, and a filament's colour follows the rig
renderer.material.create under a key that already exists answers the
material standing at it rather than one built from the description passed,
so every filament and both clerestory discs kept the colour they were first
given for the life of the session and an edit to the rig reached nothing.
The colour is now written through setProperty on every resolve.
The discs start deeper than the palette's eye-glow: a disc bright enough to
read as a lit eye from sixteen metres sits on the curve's shoulder and the
bloom around it lays neutral light over its own core, so started at the
palette's own value the core arrived at bone. The bloom threshold moves onto
radiance the practicals actually reach, and its intensity comes down,
because the anamorphic streak off a practical is the lens's rather than this
pass's.
---
props: the filament tick source names its kind
asset.inspect('@builtin::components.Audio').fields gives the Audio component's
real schema - names, types, defaults and the sourceType enum. The tick source
was created without a sourceType and took the default; SoundEffect is what it
is, so the mix can reach it by kind. Re-proved: all eight ticks audible in
audio.observe() at 49.68 to 54.21.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XrwBT91EAXmkKgu6j82tfke796698962air: the storm runs on the film clock, and the rain is rain again
AirClock reads cutscene.status().time while the film plays instead of gating on
play mode, so all four strikes evaluate and the fog, shafts, rain rates, water
column and wetness ramp move continuously rather than stepping at the fourteen
shot beats. Three samples of AirClock:filmTime() beside cutscene.status().time
now agree to 0.000 s (they were 21.0 against 37.2). The shot-1 strike lights the
gate: 11.70 light intensity at t=4.50 against 0.0 at every second before.
AirClock and MothSwarm tick once a frame off engine.mode rather than off an
os.clock heuristic; no wall clock is read in the slice.
The twelve particle emitters are one EMITTERS table, and demo.air.reset()
re-asserts it on the live scene. A built scene restores its entities from the
scene record, and a ParticleEmitter's record does not carry the nested spec keys
the component documents, so every emitter in the loaded world was a POINT
emitter at schema defaults — which is why nine thousand rain drops fell from one
spot and read as a white pipe over the facade rather than as rain (#12889).
Exteriors: the height fog runs at a tenth of the interior density until t=14,
which takes the hard arc out of the sky over the gate and gives shots 1 and 2
real blacks again. A near-lens rain sheet carries the storm at reading size.
The volumetric raymarch is 24 steps / 4 shadow taps over 70 m, with density and
lightScale rebalanced: vol_scatter median 5.774 ms at 77% attributed, against
17.041 ms.
The plaster and glass bursts fire on b11_impact, when the chandelier lands,
rather than when the cable parts. The four empty bNN_flash handlers are gone;
their cues are still declared here and stagecraft hangs the thunder on them.
READMEs for AirClock, MothSwarm and glow.shader.48bf7a7f86look: the post chain installs, and the print descends into the dark
The chain was calling pp.add(name, opts) where the tool takes
(name, shader, opts), so install() raised at its first statement and
LookDirector retried the whole thing twice a frame for the length of every
take. Nothing the slice authors had ever reached a delivered frame: no
bloom, no tone curve, no grade cube, no chromatic aberration, no vignette.
- The five effects install once, under their own names, and a chain that
reports an install it did not make is an error rather than a silent pass.
The grade cube is built once a session, guarded on state.lutGuid, instead
of re-encoding half a megabyte twice a frame.
- demo/look/tonemap.shader is new: the engine ships no tonemap preset and
the display stage has no highlight roll-off, so radiance above about one
arrived as paper white. It carries a filmic shoulder with a settable toe,
and it carries the print's exposure, because the display stage applies
its transfer after every post effect and a gain given to the meter lands
after any shoulder in front of it.
- LookDirector ticks once a frame rather than twice, stops retrying a
failing install after three attempts, holds the shot-6 station when no
film is running instead of shot 1's exterior push, and puts previewTime
back to -1 on reset so a take never inherits somebody's scrub.
- The grain is an absolute offset in linear light: 0.040 measured 6.4 code
values of noise on a frame whose midtones are in the forties. 0.007
measures 1.2.
- TRIM re-graded against the tone curve and tweened over 0.6 s, the light
loss keyed to K.IMPACT, the bulb run read from K.DRESSING, and LK_FloorRake
added as shot 7's raking key.
- READMEs for the module, the director and the shader.1af2cd79d8props: the room's things move again — the chandelier falls, the masks turn, the curtain inhales, the bulbs tick
Every method the six props components expose across a file boundary was
declared at file scope, so it was not on the component ref and every call
raised: the chandelier never fell, the wreck and the glass never appeared,
the mask ripple never began, the curtain never inhaled, the bulbs never
failed and props.reset() reset nothing. They are all typed function public:
now, and called with a colon.
What that restores, measured:
- P_Chandelier leaves 11.50 at 69.12 and is on the boards at 70.80 (baseline
11.50 for the whole film). landingAge() reads 1.749 s, which puts the
landing at 69.0 + 1.749 = 70.749 against K.IMPACT 70.75.
- Shot 12 looks down on the checkerboard and the wreck instead of on the
hanging chandelier's bowl.
- The curtain's flatness runs 0 -> 0.89 -> 0 -> 1.0 -> 0 across shot 9's two
inhales (baseline 0 throughout).
- 199 of 200 masks turn to the lens across shot 10, ending on a warm one.
Beyond the calls:
- Visibility is read off the entity rather than remembered, so the wreck and
the glass stop standing on the ballroom floor from the first frame.
- The bulbs read K.DRESSING, so the glass and the mirror practical it held go
out together; each of the eight deaths sounds PropFilamentTick, a 52 ms PCM
filament break synthesised once and carried by the world. All eight are
audible in audio.observe() at 49.66..54.19.
- The mask the ripple ends on is the nearest the SHOT can see, not the nearest
by distance, which at the restaged station was beside the lens and out of
frame. It wears PropPorcelainWarm and hands its cold face back when the
station moves.
- The chandelier's swing amplitude goes 0.052 -> 0.14 rad: at 0.052 the body
travelled 8 cm, under a pixel from the station 18 m back. It now traces a
69 cm ellipse on a 9 s long axis.
- PropGreasepaint reads wet so the handprints hold in a dying room;
PropCrystal reflectance 0.62 -> 0.72.
Cleared: the dead sag term and the duplicate curtain tessellation in
stage.module, the discarded _ = size / _ = dt, the unused running(t) argument,
the same-line statement and the silent pcall in PropsStage, the dynamic mesh
and material resolves in masks.module, and the implicit return in
PropsChandelier. Fourteen scaffolded READMEs written.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XrwBT91EAXmkKgu6j82tfk5fc3525b15hall: re-bake the three reflection probes against the print the film now carries
The cubes were first baked over an ungraded, unlit house and came back black,
so the mirrors and the wet floor went on reading sky. Baked again at film
second 31 with the post chain installed, the corridor's panes carry the
practical they face and the mask wall behind them, and the shot-5 frame at the
new heading reads spread 198.
A probe's cube is a still of one lighting state. M.bakeReflections() is the one
call that takes a new one.729e917d9fhall: the room's mechanism answers its callers and starts at rest
Every method another file calls is now declared on public: with a colon and
called with one, so the reform, the lids, the glow and the chew stop raising on
every drive: HallFaceRig:driveTo, HallEye:openTo/glowTo, HallFloorChew:chewTo/
setGrin, HallBreath:rewind, HallDrift:rewind, HallRun:recapture, and the six
call sites in hall.module. demo.hall.reset() reached its first statement for the
first time; beats.reset() now reports five slices instead of four.
Every driven field is authored at its shot-1 value on component.add - value,
target and rate - so a scene record saved mid-film cannot open the film in a
room that has already become the face. M.restPose() writes the same six through
the rig's own methods and is reset()'s first statement.
The schedule of the room is the stagecraft slice's FaceRig, which holds all four
on continuous curves across the whole film. This slice's beat handlers stop
driving them; what is left on a beat is the lit window and b02_windowout.
Eight components route update and editorUpdate through one engine.mode guard.
The film runs in edit with the simulation going, where the engine fires both, so
HallBreath's 8.6 s breath was a 4.3 s breath, HallMirrorLag's 0.34 s lag was
0.17, and HallFloorChew wrote 176 tile transforms twice a frame.
Three reflection probes, one per room the film stands a reflective surface in,
so the mirror corridor and the wet checkerboard reflect the rooms rather than
the sky; M.bakeReflections() re-bakes them from the light standing now. The
marbles come down to roughness 0.12/0.18 so the floor answers as wet stone.
The five primitive meshes are resolved once through a static table like the
materials already were, the two dead K.L locals and their silencers are gone,
and MOUTH_WIDEN joins the other five lip constants so buildMouth and HallFaceRig
read one set of numbers. Nine READMEs written; no scaffold left in demo/hall.848f0f3aa0staging: the shot table restaged, and the two moments every slice has to agree on
K.IMPACT (70.75) is the second the chandelier lands and K.DRESSING carries the
bulb run, so the sound, the light drop, the plaster burst and the glass all read
one number instead of four. Shot 8's 85 mm cut-in moves onto the shot row as
K.SHOTS[8].insert and film.module reads it, along with every duration, from the
shot table — and refuses to load if the eighteen camera moves no longer sum to
the film's hundred seconds.
Seven shots are restaged to what the spec's shot list now reads: shot 1 stands
back so the whole grin of the arch is in frame with the ground under it, shot 3
stops short of the threshold so the ballroom is unseen until shot 6, shot 5
turns its head to the mirror wall, shot 7 is lifted and pitched down so the
checkerboard reads as a plane, shot 9 comes off the centre line, shot 10 takes
the mask wall edge to edge, and shot 11 frames the chandelier's rest and its
landing in one shot.cd509edce1plan: The House Wears a Face - the second pass: the room at rest until the aftermath, the fall in frame, six shots restaged, the print descending into the dark4653ed117escene: the orphaned particle render hosts that drew a white column through the ballroom station are gone (see OrigoZero/zero#11304)51c957b936look: the print trims re-graded against a room that is no longer washed out, and the eyes light the last shot through the wall they sit behindb2801cbd03film: the room reads — velvet stops being white-emissive, the lens stops washing the frame, the eyes light the last shot, and shot 11 stands inside the ballroomc7af15f543air: the storm, the rain, the shafts and the wetness ramp
The slice that owns everything between the camera and a surface, for shots
1, 2, 3, 6, 11 and 12.
- demo.air.AirClock drives the whole slice as a pure function of the film
clock: the four lightning strikes, the fog and wetness ramps, which rain is
falling and where, and the drift of the dust inside the shafts. Held at
previewT in the editor so another slice capturing the room sees a settled
second.
- demo.air.lightshaft raymarches a tapered cone inside a bounding proxy,
clamped by the frame's own depth, so a shaft stops at the floor it lands on
and carries dust turning in it. Driven on per-instance lane 0 rather than
through material properties, which in edit mode write through to the asset.
- Rain outside on a curtain that rides the film's own camera station, three
falls off the eaves, a rope of water through the ceiling hole from shot 6
and the column it becomes in shot 12, with what each throws off the floor.
- The plaster and glass shot 11 throws, as one-shot bursts the beat replays.
- Sixteen moths on deterministic orbits around the one live bulb.
- The wetness ramp: 0.26 to 0.94 across the film, with shelter falling from
0.96 to 0.16 as the rain gets in.2eb759e3deprops: content() asks before it attaches, so a rebuild does not abandon the build
A rebuild keeps the entities it already placed, components and all. content()
was calling component.add unconditionally, which raises on the second run --
'entity already has a PropsDressing component' -- and a raise inside content()
abandons the whole scene build for every slice, not just this one.722de0580fstagecraft: the camera, the film clock, the room's schedule and the sound mix
demo.film carries the whole hundred seconds as a cutscene: fourteen shots plus
the three moves that live inside one — shot 5's dolly stopping two seconds early
so a reflection can keep travelling, and shot 8's 85 mm cut-in on the glass at
t=53 and back. Shot 6 and shot 14 both read K.STATION, so the match cut they
hang on is the same pose to the last digit. Its onStart resumes the simulation,
without which every slice's component motion stands still while the camera
travels through a hundred seconds of a held world.
Three components under demo/stagecraft:
FilmClock publishes the film's own time and fires the cues that live inside
a shot — those are declared during beats.bind(), by which time
demo.film is already in the require cache and its cue list is
fixed, so they can only be fired off the clock. It also claims the
viewport for the film's camera, which a cutscene does not get in
edit mode (#11260), and re-binds the beat registry when a
collaborator's save empties it mid-take.
FaceRig the schedule the room assembles on: reform, the eyes opening and
closing, their glow, and the floor's chew, each a curve read off
the film clock and set on the hall slice's rig immediately. The
endpoints are the hall slice's; only the timing is this one's.
FilmMix ten spatial sources and their envelopes over the hundred seconds —
rain that gets in from shot 6, a music box that stops mid-phrase, a
storm that drops away for three seconds after the chandelier lands,
and a calliope that is the last thing left in the film.
---
props: the room's furniture, and the chandelier that comes down
Everything in Merriweather Hall that is not architecture and not weather.
shrouds seven dust sheets down the entry hall, each breathing on its own
period so the room reads as ribs rather than one machine
musicbox a lacquer box on a rotted console: a brass pin-drum, a fifteen
tooth comb that flicks as each pin goes under, a governor fan at
nine times the drum, and a clown where the ballerina should be.
The movement runs down over half a second and quits mid-phrase
dressing a bulb-lined mirror whose thirty bulbs fail one after another in a
run around the frame, greasepaint handprints blooming across the
glass from the inside, and a stool that rocks itself to a stop
masks two hundred porcelain masks on the corridor's south wall and its
east return. A ripple crosses the whole field, far ones first,
arriving last at the nearest, which was already facing the lens
stage the red curtain — a runtime mesh re-lofted on the film's own 24 Hz
grid, eleven folds and a travelling drift, drawn flat against the
arch and released twice — three animatronics twitching awake in
quantised steps, a bass drum thumping in time, calliope pipes
chandelier twelve scrolled arms, twelve swags of cut drops, a two-tier fringe
and one live candle. It swings on a nine-second ellipse, the cable
gives, it falls the ten metres under gravity, lands as a wreck and
throws ninety-six shards across the checkerboard, where they stay
One clock drives all of it: the cutscene's while a cutscene plays, the slice's
own accumulator otherwise. No wall-clock time, no unseeded random — every
scatter is a hash of an index and a fixed salt. Two takes of shot 11 measured at
ten film times came back byte-identical, and beats.fire('b11_chandelier_fall')
after a reset does it again.
The masks are one entity each drawing one authored mesh; built from primitives
they were seven apiece. The fall is arithmetic on the film clock rather than the
rigid-body solver, which does not step in edit mode.
Every component names the mode each per-frame hook belongs to: both fire in both
modes (OrigoZero/zero#2743), and without that the film clock runs at double
speed.cb72d839b7look: settle the night sky and the residual light after the chandelier falls
The sky's own colours were lighting the interior to a mid-grey floor under every
shot; halved, so the room's density comes from its practicals. The storm light
down the ceiling hole and the wreckage lit by it are trimmed to the share the
aftermath wants, and the per-shot print trim is set from a measured contact
sheet of all fourteen stations.f2eadd58e8hall: hang the corridor mirrors proud of their surrounds — the frame box was covering every pane0ef3cb5a89look: the film's light and grade — night rig, staged deaths, the eyes, and the whole post chain
The look slice is a pure function of the film clock: look.apply(t) writes every
light, every filament and every lens field for one instant, and LookDirector
calls it once a frame with the cutscene's own time. Two takes are the same film
by construction, and scrubbing to a second is the same as playing to it.
- 31 lights in one rig, in the group whose curve drives it: the sodium
streetlamp and gate lamp outside, the fanlight shaft, the corridor's sick
yellow, eight dressing-mirror bulbs that die one at a time in a fixed
shuffle, the chandelier's live candle and two sconces, storm light down the
ceiling hole, the wreckage that only exists after the fall, the proscenium's
footlights, and the two eyes behind the clerestory.
- A moonless 2 a.m. storm sky, a sun under the horizon, and an ambient driven
to nothing through Act III so the last shot is lit by the eyes alone.
- The two clerestory discs — the glow itself, with no lamp behind it.
- The lens: LensFx (grain, anamorphic streak, flare, dirt), DepthOfField racked
per shot, AutoExposure that is auto and LATE through Act I and manual from
the moment we are indoors, MotionBlur at a 180-degree shutter, and
VelocityDilation.
- The post chain on the scene layer: bloom, ACES, a 32-entry grade cube built
from the palette, chromatic aberration and a vignette.
- A per-shot print trim, so fourteen stations in four rooms read as one film.
- ensure() puts back any rig light a coalesced scene build dropped.fef788e79dhall: Merriweather Hall — grounds, grin-gate, facade, entry hall, mirror corridor, ballroom shell, checkerboard floor, proscenium mouth, clerestory eyes and the reform rig
---
hall: pin every surface by a static identity literal so the slice is publishable; ease the clerestory glow gainb4ae075f84plan: The House Wears a Face — spec, scene skeleton, beat registry, film timeline, five slice stubs
---
plan: The House Wears a Face — spec, scene skeleton, beat registry, film timeline, five slice stubs