▣
module · drop-in viewer
What it does
No description provided yet.
Interface
What this asset declares: the schema it conforms to, what it exposes, and the rendered structured payload.
This asset doesn't declare a schema or structured payload.
Sub-parts
Everything contained inside this part. Assets are composite children (clickable cards). Files are leaf payloads. Expand any row to view its source.
Showing up to 3 levels deep. Open a part to see what it holds further down.
41+items
# feel
The rules that give a character its feel, shared by the `CharacterController`
component and the package's character module (`Velocity.resolve` and the
state machine), so both answer the same settings the same way.
## Exports
- `Feel.DEFAULTS`: the feel a character has when nothing states another
(`acceleration` 20, `braking` 30, `jumpForce` 5, `jumpHeight` 0,
`jumpApexTime` 0, `minJumpHeight` 0, `fallGravityMultiplier` 1,
`maxFallSpeed` 0).
- `Feel.walk(vx, vz, wantX, wantZ, acceleration, braking, dt) -> (vx, vz, dx, dz)`:
the ground velocity after `dt` seconds of walking toward the request, and
the distance covered across the ground over them, exact for that motion. It
speeds up along the request at `acceleration`, slows at `braking`, sheds
the part across the request at `braking`, and brakes to a stop before a
reversal speeds up the other way. 0 for either reaches the request at once.
- `Feel.launch(settings, pull, held) -> (speed, rise)`: the take-off speed of
a jump and how it rises, from `jumpForce`, `jumpHeight`, `jumpApexTime` and
`minJumpHeight`, against the gravity `pull` (m/s², positive pulling down).
`held` says the jump was asked for with the jump control held, which makes
it one a release cuts.
- `Feel.release(vy, rise, held) -> (vy, rise)`: a jump asked for held, once
the control reads let go during its rise (on the step it takes off, for a
request let go before then), is cut to the speed that tops it out
`minJumpHeight` above where it was.
- `Feel.vertical(vy, dt, rise, pull, settings) -> (dy, vy, rise)`: one step
along up off the ground, integrated exactly: a rising jump against its own
gravity, a fall at `pull * fallGravityMultiplier`, no faster than
`maxFallSpeed`. A step crossing the top switches gravity there, so the stated
height and apex time hold at any frame rate.
- `Feel.jumpsAfter(jumpCount, maxJumps, footing) -> number?`: the jump count a
granted request leaves, or nil. On its feet or within coyote time
(`footing`) a character takes its first jump; past it the jump from the
ground counts as spent and a request takes the next jump `maxJumps` leaves.
## Usage
```luau
local Feel = require("@builtin::systems.characterController.characterController.movement.feel")
local dx, dz
vx, vz, dx, dz = Feel.walk(vx, vz, wantX, wantZ, 20, 30, dt)
local vy, rise = Feel.launch({ jumpHeight = 1.2, jumpApexTime = 0.4, minJumpHeight = 0.4 }, 9.81, true)
vy, rise = Feel.release(vy, rise, jumpHeld)
local dy
dy, vy, rise = Feel.vertical(vy, dt, rise, 9.81, { fallGravityMultiplier = 1.5, maxFallSpeed = 20 })
```
▲ 0↑ born
# velocity
Velocity integration and per-frame movement resolution for the
character controller. Owns no state — every call takes the current
position / velocity / config / state and returns the new position
delta plus the updated velocity. Internally uses the `Ground`,
`Walls`, and `Ceiling` raycasting helpers.
## Exports
- `M.resolve(pos: Vec3, vel: Vec3, moveInput: MoveInput, config: Config, state, dt: number, selfId: string) -> (dx, dy, dz, vx, vy, vz, groundHit, wallHit, ceilHit)` —
apply gravity + air control, resolve wall slide / corner pin /
ceiling bonk / ground snap / slope projection / steep-slope slide /
step climbing in that order.
Types:
- `Vec3 = { x: number, y: number, z: number }`
- `MoveInput = { x: number, z: number }` — world-space horizontal input.
- `Config = { height?, radius?, maxSlopeAngle?, stepHeight?, gravity?, airControlFactor?, groundSnapDistance?, skinWidth? }`
## Usage
```luau
local Velocity = require("@builtin::systems.characterController.characterController.movement.velocity")
local dx, dy, dz, vx, vy, vz, groundHit, wallHit, ceilHit =
Velocity.resolve(pos, vel, moveInput, config, state, dt, selfId)
```
## Notes
- The function is pure: it returns nine values but mutates nothing.
The caller is responsible for writing the position delta back via
`entity.localPosition.set` and updating its velocity field.
- Air control blends horizontal velocity toward the input with
`airLerp = min(1, airControlFactor * 10 * dt)`. Grounded mode uses
direct assignment for responsive feel.
- Ground cast distance is `groundSnapDistance` when grounded and
`100` when airborne (so a fast fall doesn't tunnel past the floor).
Snap commit threshold is tight (the frame's own vertical travel),
so airborne ground hits don't snap unless they are within that
travel window.
- A grounded frame looks for ground above the feet as well, by the
rise its own travel covers on ground of `maxSlopeAngle` — that is
the ground a walking character climbs into. The seat takes it up to
the rise the surface it found covers over that travel, plus a step;
a surface further up stands across the path, and the character keeps
the ground it already has.
- Steep-slope (above `maxSlopeAngle`) hits set `groundHit._sliding =
true` so the state machine treats the frame as `sliding` rather
than `grounded`.
- A frame whose horizontal movement the wall pass cancels outright —
pressed straight into a wall, or wedged where two surfaces meet —
sets `wallHit._blocked = true`, so a refused walk reads as refused
instead of as a walk that happened to cover no ground.
- Step climbing only fires when `state.grounded`, horizontal motion
exists, and no wall hit was registered.
▲ 0↑ born
# Module (asset type)
A module is a reusable, stateless (or globally-stateful) Luau library
that other code pulls in with `require()`. Modules are the unit of
factored-out logic in a world: helpers, math libraries, format
parsers, registries, shared algorithms.
## When to use one
- You have logic you want to share across multiple components,
services, scenes, or tools.
- You have a registry, lookup table, or shared cache that callers all
read from / write to.
- You want a stable API surface (`M.fn`) other code can depend on.
If the logic is bound to one entity, use a `.component`. If you want a
named UI of fields rather than functions, use a `.preset`.
## Where it lives
- Source: `/zero/source/.../<name>.module/`
- Identity: the source path with `/` written as `.` and each segment's
type suffix dropped — `/zero/source/demo/beats.module` is
`demo.beats`, and `/zero/source/kit.package/beats.module` is
`kit.beats`, the container's name kept and its `.package` suffix
gone. `asset.create` returns this string, `asset.resolve(...).identity`
reads it back, and the `require` forms below write it as
`<identity>`.
- Folder shape:
- `init.luau` (or `init.lua`) — module body. **Required.** Returns
a table (conventionally named `M`).
- `README.md` — instance-level documentation. **Required.**
- `.metadata` — agent-editable tags + free-form fields. **Required.**
## How to create one
```luau
asset.create("module", "<name>")
-- Creates: /zero/source/<name>.module/
-- init.luau (canonical `local M = {} … return M`)
-- README.md (instance README template)
-- `folder` places it in a subfolder of /source, and that subfolder
-- leads the identity: `{ folder = "lib" }` produces `lib.<name>`.
-- `into` authors it inside a resolved container (a package, a toolbox),
-- whose own identity leads the same way:
asset.create("module", "<name>", { folder = "lib" })
asset.create("module", "<name>", { into = asset.resolve("myPkg.package") })
```
## How it operates
1. **Registration.** Writing `init.luau` into a `.module/` folder
indexes the asset and registers the module path with the resolver.
2. **Loading.** The first `require("<identity>")` runs
the file's body and caches the returned table. Subsequent requires
from anywhere return the **same table** — this is the
shared-state lever for "module-local" registries. The body runs in
an environment of the module's own: a name it declares without
`local` is readable by the module's own functions and by no other
script, so an export reaches its callers through the returned table
and nothing else. Requiring a component's folder runs its chunk the
same way, once, and its `update`, `start` and `public` stay in that
environment; a component runs on an entity through
`entity(id).component.add(name)`.
3. **Hot reload.** Editing the file re-runs the module body and folds
what it returns into the table already loaded, so that table keeps
its identity: a caller that captured it with `require` reads the new
source's functions and values through the reference it already
holds, and a later `require` returns that same table. A key the new
source drops goes away; a key something set at runtime stays. The
body's own `local`s start again from their initial values, so state
that must outlive an edit lives in `modules.state()`
(`guides { path: "core/scripting-and-tasks" }`).
4. **Identity resolution.** A module is reached by its `<identity>`,
and where the caller lives decides which spelling of it resolves.
For a module in a **world**, from a caller in that same world —
another module, a component, a scene entrypoint, or an `execute`
chunk:
- `require("<identity>")` — the identity on its own, resolved
against the caller's own root. It carries every folder segment,
so a module created with `{ folder = "demo" }` is
`require("demo.beats")`.
- `require("@root::<identity>")` — the same root-relative
resolution, written out.
- `require(".sibling")` — a module in the same folder, by its bare
name; `..name` steps up one folder, `...name` two.
Logs, stack traces and hot-reload notices name that same module
`@local.source.<identity>` — its key under the world source root.
The `<identity>` tail of that key is the form above, so a trace
reading `@local.source.demo.beats` is `require("demo.beats")`.
For a module in a **library** — content under
`/zero/source/libs/@<lib>/` — `@<lib>::` addresses that library's
root from anywhere: `require("@builtin::modules.transform")`.
Mounting a world as a library moves its files under such a root and
flips the caller root to `@<lib>::`, which is what keeps the
root-relative forms above resolving across the move.
## Discovery
- `asset.list("module")` — every registered module.
- `asset.inspect("<name>")` — public functions, source path, this
type README.
- `ls /zero/source/<name>.module` lists the files the folder holds.
## Authoring conventions
- Return a single `M` table from `init.luau`. Top-level statements
with side effects run on first require — useful for one-time
initialization, dangerous if they touch the engine before it's
ready.
- Write exported functions as `typed function`, not `function`: the
argument types are enforced at the call and the checker knows the
signature, so a caller's mistake is reported where they made it.
- Annotate exported functions with `--!desc` / `--!arg` / `--!return`
/ `--!example` so the LSP, `tools.list`, and `asset.inspect`
surface them. A function with no `--!desc` is reachable only by
someone already reading this file.
- Declare a VALUE with `Field.<kind>(default, mode, description)`, and
a table whose members are reached through a metatable with
`--!members <TypeName>` — the latter gives the surface its accepted
member set, its type, and its documentation from one table. See
`guides { path: "core/authoring" }` for all four rules and
`modules/api/engine/entity.module/members.module` for a worked
member table.
- Keep module state in module-local upvalues or in `modules.state()`.
A name the body declares without `local` lives in the module's
environment, which every run of the module shares: a function the
previous run left in place reads what the reload assigned. Module-locals start again from their
initial values with each hot reload; the table `modules.state()`
returns is the same table on both sides of every reload.
- Prefer focused modules over kitchen-sink modules. If two halves of a
module have no shared state, split them.
## Common pitfalls
- **Cyclic requires.** A `require` chain that loops will return the
partial table (the half built before the cycle was detected).
Design for one-way dependencies.
- **Engine-time side effects.** Don't `entity.spawn` at module
top-level — the engine may not be ready. Expose an `M.init` and
call it from a scene entrypoint.
- **Hot-reload + module-local cache.** A module that caches
expensive computation in upvalues loses that cache on reload —
fine for dev, but be aware in performance work.
- **`init.lua` vs `init.luau`.** Either works, `.luau` is canonical.
- **Writing one while play runs.** A `/source` write made while play is
running lands on the play shadow, and a guarded play-exit discards it
unless it is kept. One `.module` write shadows `init.luau`, the
`README.md` and the `.metadata` together.
`vfs.write(path, bytes, { durable = true })` skips the shadow, and
`vfs.promotePlayShadow` keeps what is already on it — the `core/vfs`
guide has the model and what each route costs.
## Related types
- `.component` — for entity-bound state + lifecycle hooks.
- `.service` — generates content you don't have yet (a mesh, sound, texture, …) via a metered provider.
- `.tool` — for a single agent-callable function with a YAML schema.
- `.package` — to group several modules + components + scenes into
one shippable folder.
## In the Inspector
Exports: what the module exports (name, kind, signature), parsed from its source without running it, with **Check** (the LSP's diagnostics for its entry file) and **Open**.
▲ 0↑ born
# assetType (asset type)
An asset type says what a kind of asset is: the files an asset of the kind is
made of, the code that gives it behaviour, the interface a person uses to work
with it, and how it is found, pictured and checked. A `<typename>.assetType/`
folder declares a type called `<typename>`, and every `<name>.<typename>/`
folder is an asset of it. `assetType` is itself a type, so a type is an asset
like any other: it is created, versioned, installed and contributed the same way.
## Making a type
`asset.create("assetType", "<typename>")` scaffolds a type. The type registers
the moment its folder is written, anywhere under `/zero/source/`, and from then
on `<name>.<typename>/` folders are its assets. An asset of a type that is not
registered yet is not an asset, so make the type first.
A type folder is a root: `~.x` in any file inside it names the type's own `x`,
wherever the type is installed. Keep the type's whole implementation inside its
folder and reach it that way.
What a type folder must hold is set by this type's own `type.yaml`, the same way
every type's `type.yaml` sets what its assets hold. `asset.validate` on a type
reports anything missing, and the scaffold produces a folder that passes.
## What sets your type's schema (`type.yaml`)
`type.yaml` is the structural contract every asset of the type is checked
against. The keys below are the ones the engine reads; a key not listed here is
ignored.
| Key | What it controls |
|---|---|
| `suffix` | The folder suffix of the type's assets. Defaults to `.<typename>`. |
| `primary` | The file or files that are the asset's content: what the asset resolves to when it is used. |
| `entry_files`, `primary_aliases` | Further files that load as the asset or share its identity. |
| `is_container` | Whether the suffix stays in the identities of what the asset holds. |
| `is_opaque_walker` | Whether a walk of the tree stops at the asset and registers only its primary. |
| `plural_dir`, `classify_exts` | Loose files in a folder of this name, or with these extensions, are assets of the type. |
| `is_text_default` | Whether the asset's files are text unless stated otherwise. |
| `broadcasts_subassets` | Whether assets nested inside an asset of the type are found by their own short name. |
| `root` | `true` makes every asset of the type a root, so `~.x` inside one names that asset's own `x`. |
| `contract_ref: { field, category }` | A key of the primary file that names another asset the asset is built on. |
| `files: { required, optional }` | The files an asset holds (below). |
| `allow_unlisted` | `false` reports every file the type does not declare. |
| `aliases_from: [{ file, key }]` | Further names an asset answers to, read from its own files. |
| `settings:` | Typed per-asset settings (below). |
| `inspector:` | The interface people use for the type and its assets (below). |
| `preview:` | How an asset is pictured (below). |
| `references:` | Names of other assets the type's files carry (below). |
| `indexing:` | What search reads for each asset (below). |
| `describe:` | How a missing description is generated (below). |
### The files an asset holds
Each entry under `files.required` or `files.optional` is
`{ path, kind: file | folder, one_of_group?, content? }`. `*` in a path matches
within one segment. Entries that share a `one_of_group` are satisfied by any one
of them. `content` lists checks on the file's bytes:
| Check | Passes when |
|---|---|
| `non_empty` | the file has content |
| `json_field { key, type?, non_empty?, accept? }` | the JSON holds the key (a dotted path) with that shape |
| `yaml_field { key, type?, non_empty?, accept? }` | the same for YAML |
| `described { keys?, headings?, message? }` | the file says what the asset is (see "Ask your assets to say what they are") |
Each check takes a `message`, which is what the author is told when it fails.
### Settings
`settings: { values, schema: { type | instance, export? } }` gives every asset
typed settings. `values` names the file an asset's values live in; `schema.type`
declares one schema for the whole type, and `schema.instance` names a file each
asset declares its own in. `asset.create` writes the resolved values, and a write
to the values file reaches `onChange` with what changed.
## The human side (`inspector.luau`)
A type is used by people through its Inspector, and without one the type is
usable only from code. The Inspector is the type's interface for a person: for a
procedural graph it is the graph editor, for a kit it is the tracking view of
what the kit holds and what is still missing. Writing it is part of writing the
type.
`inspector: { type, instance? }` in `type.yaml` names the files. `type` is the
interface for the type itself and for its assets; `instance` names a file an
asset may ship to add its own. Each returns:
```luau
return {
sections = { { id = "graph", title = "Graph", build = function(ctx) ... end } },
replace = { contents = { ... } }, -- replace a default section by id
order = { "graph", "contents" }, -- section order
}
```
`build(ctx)` receives the asset and builds the section. A section's `title`, and
the text its rows carry, is a string or an `i18n.text` value read from a catalog
(`i18n.text("inspectors.mesh.title")`), which follows the editor's language. `asset.create("assetType",
...)` scaffolds a working `inspector.luau` to start from. `asset.validate` on a
type that names no inspector, or names one that does not load, reports it.
## Say what your type is for (`about.yaml`)
Every type carries an `about.yaml` that says what the type is for, in three
plain-language texts:
```yaml
intent: "Sets the typeface of the text in your game: UI, labels, signs and 3D lettering."
function: "A font, from a TTF, OTF or WOFF file, made available to all of Zero's text, including 3D text."
usage: "You choose it by name for your UI or your text, and the text appears in that typeface."
```
- **`intent`** is what the type is for in someone's game, in the words a game maker uses. Up to 800 bytes.
- **`function`** is how it works today: what an asset of it is made of and what the engine does with it. Up to 1500 bytes.
- **`usage`** is what a person or an agent does with one. Up to 1200 bytes.
Write about the type as a whole, not one asset of it, and say what it does now.
Agents read these texts to learn when to reach for the type and how; people
searching find the type by them. The scaffold starts each text with
`[[describe]]` and a note on what to write; a text that still starts that way
counts as not written. `services describe` can write them.
They show up in `asset.inspect` as `detail.about`, in
`assetTypeRef:getAbout()`, at the end of the type's `types/<typename>` guide,
and at the top of the type's Inspector.
## Ask your assets to say what they are
A type can require each asset to carry a description: a file, written by the
author or generated, saying what the asset is and what it is for. Declare it with
a `described` check:
```yaml
files:
required:
- path: "README.md"
kind: "file"
content:
- { check: "described", message: "Say what this widget is for and where it goes." }
```
A file that is missing, empty or still has a line starting with `[[describe]]`
fails the check, and so does a YAML file whose named `keys` are missing or over
their `max_bytes`, or a Markdown file missing a named heading. `asset.validate`
names the asset, and a push that carries it is refused with `message`.
`services describe` finds such assets and writes their descriptions.
`describe:` steers what is generated:
```yaml
describe:
guidance: "Say what the widget shows, what input it reacts to, and where it fits in a UI."
examples:
- "<identity of an asset of this type whose description reads well>"
```
An example is an asset of your type whose description is a true, written one,
never a placeholder and never the asset being described; with none, leave
`examples` empty. A type whose assets the model cannot perceive (a sound, a
motion) says so in `guidance`, and the description is drawn only from what the
asset's own files state.
Start the file unwritten in your `template/`: a heading and one line starting
with `[[describe]]`, never example content, which every new asset would carry
verbatim. A type whose assets say what they are through their own content (a
mesh, a texture) declares no check.
## The type's code (`behavior.luau`)
`behavior.luau` returns one table. These are the keys the engine reads from it;
anything else on the table is the type's own.
### What the type's assets can do
| Key | Shape | What the engine does with it |
|---|---|---|
| `ref` | `{ [name] = function(self, ...) }` | Every function becomes a method on every asset of the type: `ref:name(...)`. |
| `modules` | `{ [name] = require(".x") }` | Code the type's assets reach with `asset.containing(__FILE__).modules.<name>`. |
| `events` | an events schema | Events an asset fires. Readers subscribe through `ref.events.<name>:connect(...)`; the type fires them. |
| `refShapes` | `{ [method] = function(self) -> (typeExpr, source?) }` | The result type of a `ref` method for one particular asset (below). |
| `namePattern` | a Lua pattern | The names `asset.create` accepts for the type's assets. Default `^[A-Za-z][A-Za-z0-9_]*$`. |
| `derive` | `{ output, module, compute, fingerprint, matches?, required?, timeout? }` | A file computed from the asset when it is committed; a `required` one holds the commit until it lands. |
Some `ref` names mean the same for every type, and the engine calls them:
- **`instantiate(self, target?, opts?) -> (root, idMap)`**: puts the asset in a scene. Defining it is what makes the type scene-instantiable. Its return is a contract (below).
- **`inspect(self) -> detail`**: what `asset.inspect` reports for the asset beyond the common record (below).
- **`preview(self, opts)`**: renders the asset's picture; it wins over the type's `preview:` recipe.
- **`previewMaterial(self) -> { material }`**: the material a `surface` preview paints.
- **`saveDefinition(self)`**: writes the asset's in-memory edits back to its files in edit mode.
Some names are answered for every asset before the type is asked, so a `ref`
entry of the same name is never reached: `getSource`, `getBytes`, `getText`,
`exists`, `deps`, `canInstantiate`, `canPreview`, `preview` (which calls yours
when you define one), `meta`, `runtime`, `events`, `typeRef`, `modules`, and the
residency flags `has_backing_asset`, `has_runtime_changes`, `cpu_resident`,
`gpu_resident`.
### When the engine calls the type
| Hook | Signature | When it runs |
|---|---|---|
| `onCreate` | `(name, opts) -> { [path] = contents }` | On `asset.create`. Returns the files of the new asset, laid over the type's `template/`. Annotate `opts`: its type is the schema `asset.create` checks the caller's arguments against. A `""` key writes a single loose file. |
| `onReplace` | `(dest, files) -> files` | On an `asset.create` over an asset already at `dest`, after `onCreate`, so what the author added can be carried into the replacement. |
| `onRegister` | `(self)` | Once per asset, when it first registers: when the world loads, on a live `asset.create`, and when an asset arrives later (installed, pulled, synced). This is what makes an asset take effect the moment it is written. |
| `onChange` | `(ref, change)` | On every write to a file inside an asset of the type. `change` is `{ path, asset, type, kind, origin }`, plus `settings` and `settingsChanged` for a write to the settings values file; `kind` is `edited` or `seeded`, `origin` is `local` or `remote`. Filter on `change.path`. Writes to one asset arrive in order, each after the hook for the one before has finished, and the hook may wait on what it reads. A write the hook makes inside its own asset arrives later like any other, so keep the hook convergent. |
| `onDependencyChange` | `(ref, change)` | When a module the asset's code requires is re-run, or a name the asset carries starts resolving. `change.kind` is `dependency`. |
| `onDelete` | `(ref)` | When an asset of the type leaves the world: deleted, or the world it is in is swapped away. |
| `validate` | `(ref) -> { { code, message, severity?, path? } }` | On `asset.validate`, after the `type.yaml` checks, for the type's own rules. `severity` defaults to `error`. Runs on every push, so a type's rules hold at publish. A hook that fails reports `validate.hook_failed`. |
### Settings hooks
| Hook | When it runs |
|---|---|
| `settingsDefaults(name, opts, asked) -> table` | Once per `asset.create`, for values the schema's defaults do not give. |
| `settingsCorrections(values, name, opts) -> (corrections?, reasons?)` | On every settings write. A correction to a field the writer named refuses the write, giving the reason. |
| `settingsDerivedDefaults(values, explicit, changed)` | On a settings write, for fields derived from others. |
| `normalizeSettings(values, stored?)` | On every read and write, to map an earlier spelling of a field to the current one. |
| `settingsHealed(values, stored)` | On a read, to repair stored values. |
| `settingsSchemaProblem(schema, ref) -> string?` | When an asset's own schema is read; a returned string refuses the schema. |
`creationInputs` (`{ [opt] = true | selectorOpt }`) names `asset.create` options
that are inputs to the type rather than settings.
### Reloading
An edit to `behavior.luau` reaches existing assets with no restart.
## How an asset is pictured (`preview:`)
| `kind` | The picture is | The type provides |
|---|---|---|
| `instantiate` | the asset placed in the preview studio through its `instantiate` | `ref.instantiate` |
| `image` | a file the asset holds, fitted to the frame | `source: { files }`, the candidate files in order |
| `surface` | the asset painted on a mesh | `mesh`, and `ref.previewMaterial` |
| `custom` | whatever `ref.preview` returns | `ref.preview` |
```yaml
preview:
kind: surface
mesh: sphere
```
`angle: [yaw, pitch]` turns the camera. The studio owns the light, the backdrop
and the framing, so an asset pictures the same in every world. A type with no
`preview:` that defines `instantiate` still answers `ref:preview()`.
A picture is rendered when something asks to view it (the editor showing the
asset, `ref:preview()`), when previews are generated on request
(`assets.generatePreviews`), and when the asset is staged. An edit alone
renders nothing. The picture records what it was made
from, so a stale one is told from a current one.
## The names your type's assets hold (`references:`)
Where your type's own format or API carries the name of another asset, declare
it here:
```yaml
references:
keys: # a top-level key of the type's files that holds a name, or a table of them
- { key: "shader", type: "shader" }
args: # an argument of a call, counting from 1
- { call: "g:node", position: 2, type: "procNode" }
fields: # a field of the options table a call takes
- { call: "fx.beam", field: "material", type: "material" }
```
`type` is the category the name resolves in. `asset.declareReferenceKey`,
`asset.declareReferenceArg` and `asset.declareReferenceField` declare the same
from a script.
## What search reads (`indexing:`)
`indexing:` is how assets are found. Search reaches an asset only through what
its type's `indexing:` names, and adds nothing of its own. That includes you: an
asset indexed badly is one you cannot find later, when you are making something
else and need it. A type whose assets are never looked for says `indexing: none`.
```yaml
indexing:
data: # text, read from the asset's files
- role: identity
extractor: verbatim
source: { file: "README.md" }
- role: interface
extractor: symbols
source: { files: ["init.luau"] }
- role: implementation
extractor: verbatim
source: { files: ["init.luau"] }
content: # the picture
- role: identity
modality: image
source: { file: "preview.png" }
facets: # what a query filters and re-ranks by
file: ".metadata"
rigged: { type: bool, from: { components: { contains: SkinnedModel } } }
roughness: { type: number, filter: range, from: { file: "mat.yaml", field: "floats.roughness" } }
```
**Roles.** Each `data` and `content` entry has a `role`, and a query matches in
two slots:
- **`identity`**: what an asset is. For anything you look at, the picture; for anything else, the text that says what it is.
- **`capability`**: what it does and how it is made. `interface` (the signatures or shape a caller uses) and `implementation` (the body) both count as capability, and a type with code usually declares both.
Ask what a person would recognise an asset of the type by, and what it does, and
point each role at the file that says it. For text, that is the asset's
description: the file your template starts with a `[[describe]]` block, which the
author writes or `services describe` fills in (see "Ask your assets to say what
they are").
**`data`.** `extractor: verbatim` embeds a file's text as it is; `symbols` embeds
the declared signatures of code. `source` is `{ file }` or `{ files: [...] }`.
Never index a file name (`source: { field: name }`): one
or two words carry nothing to match.
**`content`.** `modality: image` embeds the picture itself, so a text query
matches what the asset looks like. A type whose assets are looked at makes the
picture its identity.
**`facets`.** What a query narrows and re-ranks the matches by. `file` is embedded
whole, so keys nobody declared in it are still found. Each further key is
computed for every asset and states a value for every one, including `false`: a
file can imply "not rigged" but never say it, and a query separates rigged from
unrigged only because the unrigged ones say `rigged: false`. A key is
`{ type: bool | number | enum, filter?: range, from }`, where `from` is
`{ file, field }` (a field of one of the asset's files, dotted for nesting),
`{ metadata: key }`, or `{ components: { contains | any_outside } }` (what the
asset's entities carry).
## What blocks a push
A push checks every asset it carries against its type. These refuse it:
- a required file that is missing, a `content` check that fails, a `described` file not written yet;
- an error from the type's `validate`.
Unlisted files and warnings do not. A `described` file blocks only a push that
changes the asset. When a push is refused, the message names each asset and what
it lacks. `world.publishBlockers()` and `zm status` read the same list without
pushing.
## Typing a result from the asset (`refShapes`)
A `ref` method whose result depends on the asset (one entry per child folder, per
row of a config, per control a map declares) can only be annotated as
`{ [string]: Thing }`, which accepts any key. `refShapes` states the result for
each asset instead: a function returning a Luau type expression for that asset,
and the module whose types the expression uses. Read the asset; never run it.
```lua
-- inputMap.assetType/behavior.luau
M.refShapes = {
activate = function(self): (string, string)
local names = {}
for _, control in ipairs(M.ref.controls(self)) do
table.insert(names, control.name .. ": Handle")
end
if #names == 0 then return "", "" end
return "{ " .. table.concat(names, ", ") .. " }", "@builtin::modules.zinput.scheme"
end,
}
```
With it, `map.jump:onPressed(fn)` is checked and `map.noexisting` is reported.
A per-asset type applies where the call site names which asset: a component
field whose default names it, or an annotation `AssetRef<"inputMap", "<identity>">`.
`asset.resolve(name, category)` carries only the category, and a name computed
at runtime carries nothing, so calls on those keep the declared return. The type
belongs to the call's result: index it there, or bind what you need from it
there, and the names stay checked.
`require("@builtin::assetTypes.assetType.shared.refShapes").published()` shows
what was published: `categories` (each type's method surface) and `returns`
(per-asset results by identity, then method). An identity missing from
`returns` was never published. Results are recomputed when an asset is written;
at most 64 assets of one type are read.
## Putting an asset in a scene (`ref.instantiate`)
A caller writes one piece of code against every instantiable type, so what
`instantiate` returns is fixed:
```lua
local Instantiable = require("@builtin::assetTypes.assetType.shared.instantiable")
M.ref = {
instantiate = function(self, target, opts)
local root = Instantiable.root(self, target, opts)
-- compose the asset under `root`, now
return Instantiable.result(self, root, idMap)
end,
}
```
**In.** `target` is the entity the asset lands under, or onto for a hierarchy
type; with none, the type spawns a new root. `position`, `rotation` (three
numbers in degrees, or a quaternion), `scale`, `name` and `temporary` mean the
same for every type: `Instantiable.root` applies them to a root you make,
`Instantiable.place` to one you adopt. Document any options of your own in the
hook's `--!arg` docs.
**Out.** `(root, idMap)`. `root` is the composed root, live when you return:
build synchronously, never defer to a component's `awake`. `idMap` maps each
original id to the spawned one, so a component that composes the asset again on
every load can pass it back in and keep references into the composition. Every
call goes through `Instantiable.result`, which refuses a root that is not live
and turns a missing `idMap` into `{}`.
## Inspecting an asset (`ref.inspect`)
`asset.inspect(ref)` builds a record every asset shares (`identity`, `name`,
`guid`, `source`, `typeName`, `typeDefinitionPath`, `scope`, `origin`,
`description`, `tags`), then calls `ref.inspect(self)` for the type's own
`detail`:
```lua
M.ref = {
inspect = function(self)
-- read the asset's own files, never runtime state: inspect works on an asset
-- that has not been compiled, uploaded or registered
return { --[[ what makes this asset what it is ]] }
end,
}
```
Without it, the record is the shared part alone, and an agent inspecting the
asset learns nothing of what it is. A hook that raises leaves `detail` empty and
sets `record.warning`.
## Discovery
- `asset.list("assetType")`: every registered type.
- `asset.inspect("<typename>")`: the type, its README and its `about.yaml` texts.
- `asset.resolve("<typename>", "assetType")`: the type itself.
▲ 0↑ born
# walls
Wall-detection and slide helpers for the character controller. Runs the
horizontal pass of a character's step, sweeps the character's own
capsule along the movement direction, puts a body that overlaps a wall
back outside it, probes a single height with a horizontal ray, and
slides a movement vector along a wall normal. No state.
## Exports
- `M.move(x: number, y: number, z: number, dx: number, dz: number, height: number, radius: number, skinWidth: number, maxSlopeAngle: number, selfId: string) -> Step`:
the horizontal pass of one step. Puts a body that overlaps a wall back
outside it (`pushOut`), then carries it along `(dx, dz)`: the body stops
`skinWidth` short of the first wall the step runs into, and the rest of
the step slides along that wall and along the next one the slide meets.
Returns `{ dx, dz, pushX, pushZ, blocked, hit }`: where the body goes
(push included), the push itself, whether the step met a wall and gained
no ground towards where it asked to go, and the first wall it met.
- `M.pushOut(x: number, y: number, z: number, height: number, radius: number, skinWidth: number, maxSlopeAngle: number, selfId: string) -> (number, number)`:
the horizontal push that puts a body overlapping a wall back outside it,
`skinWidth` clear of the surface, along the overlap's shortest way out.
`0, 0` for a body that overlaps no wall.
- `M.castBody(x: number, y: number, z: number, dirX: number, dirZ: number, height: number, radius: number, skinWidth: number, maxSlopeAngle: number, selfId: string, distance: number?) -> hit?`:
sweep the capsule spanning the character from the top of the ground
band above `(x, y, z)` (its feet) up to `y + height`, reaching
`distance + skinWidth` past its own surface (`skinWidth` alone when
`distance` is omitted). Returns the wall standing across the path, or
`nil` when the path is clear.
- `M.castDirection(x: number, y: number, z: number, dirX: number, dirZ: number, radius: number, skinWidth: number, selfId: string) -> hit?` —
single horizontal ray of length `radius + skinWidth`, from whichever
sample height the caller passes. The ray passes through the colliders
the body carries (`selfId` and every entity parented under it).
- `M.slideAlongWall(moveX: number, moveZ: number, normalX: number, normalZ: number) -> (number, number)` —
strip the component of `move` going into the wall (`v - (v . n) * n`,
XZ only). Returns input unchanged when `dot >= 0` or the XZ-normal
is effectively zero.
## Usage
```luau
local Walls = require("@builtin::systems.characterController.characterController.physics.walls")
local step = Walls.move(px, py, pz, vx * dt, vz * dt, 1.8, 0.3, 0.01, 45, selfId)
px, pz = px + step.dx, pz + step.dz
local hit = Walls.castBody(px, py, pz, dirX, dirZ, 1.8, 0.3, 0.01, 45, selfId)
if hit then
local slideX, slideZ = Walls.slideAlongWall(dx, dz, hit.normal.x, hit.normal.z)
end
```
## Notes
- `move` sweeps the whole step, so however long a frame's step is, the
body ends outside every wall it walks at, and the next step it asks for
starts clear of them, away from a wall it rests against as much as
along it.
- A sweep begun inside a wall answers about the overlap in whichever
direction it points. `pushOut` measures how deep the overlap goes by
sweeping the same body back in from outside the wall, so a body placed
inside a wall, or shoved into one, walks again on the next step.
- A collider the body carries, on `selfId` or on an entity parented under
it (a held prop, a trigger volume that travels with the character), is
no wall: `castBody` sweeps through it and `pushOut` pushes nothing out
of it, so a character carrying one stands where it is put and walks.
- `castBody` sweeps the whole body, so an opening narrower than
`2 * radius` stops the character even when nothing stands on the
centre line — two cabinets 6 cm apart are a wall, not a doorway.
- A contact whose surface faces up or down — the ramps the character
walks up, to `maxSlopeAngle`, and anything directly overhead —
belongs to the ground and ceiling passes. `castBody` sweeps on past
those, so a body on a ramp still reports the wall ahead of it.
- `castBody` starts its sweep above the ground band: a cap of `radius`
resting on ground of angle `a` reaches `radius * (1 / cos(a) - 1)`
below the surface uphill of it, and a sweep begun inside a surface
describes the shortest way out of that overlap instead of the surface
standing across the path. The band is measured at `maxSlopeAngle`, the
steepest ground the character walks, and the ground and step passes own
everything under it.
- `slideAlongWall` normalises the wall normal in XZ; callers don't
need to pre-normalise. The Y component of the normal is ignored
because slide-along is a horizontal operation.
- The slide helper returns the input movement unchanged whenever the
movement isn't pressing into the wall — there's no "stick to wall"
behaviour, only "don't pass through".
▲ 0↑ born
# ceiling
Single-ray ceiling-detection helper for the character controller.
Casts upward from the character's head to detect overhead obstacles
(head bonk, low clearance). No state.
## Exports
- `M.cast(x: number, y: number, z: number, height: number, skinWidth: number, selfId: string) -> hit?` —
cast a ray from `(x, y + height - skinWidth, z)` upward for
`skinWidth * 2`. Returns the raycast hit table or `nil`. The ray passes
through the colliders the body carries (`selfId` and every entity
parented under it), so a prop held overhead is never a ceiling.
## Usage
```luau
local Ceiling = require("@builtin::systems.characterController.characterController.physics.ceiling")
local hit = Ceiling.cast(px, py, pz, 1.8, 0.01, selfId)
if hit then
-- head bonk: zero out upward velocity
end
```
## Notes
- Pure function — no module state, no side effects beyond the engine
raycast itself.
- The ray is intentionally short (`skinWidth * 2`) so a head-bonk
check only fires when the character is actively pressing up
against a ceiling, not when there is ambient overhead geometry
far above.
▲ 0↑ born
# platform
The body a character stands on, and how that body moves the character. A
character standing on a body that moves or turns (a lift, a moving platform,
a turntable, a raft, a ship's deck) is carried with it: the point under its
feet goes where the body takes it, and it turns with the body's turn about
up. Kinematic bodies a script moves, dynamic bodies the simulation moves and
transforms something animates carry it alike. Pure helpers.
Poses are read where the frame draws them (`Physics.drawnPose`), so a
character carried by them stays in step with the platform on screen at any
frame rate and physics tick rate. A ride keeps how fast its body moved the
feet on each frame of its last tenth of a second, and of at least its last
six frames (`trail`): averaged, that is
how fast a kinematic body or an animated transform was carrying the character
when it leaves.
## Exports
- `M.pose(entityId) -> (x, y, z, rotation)?` — where an entity is drawn this
frame and how it is turned, in world space.
- `M.hold(entityId, from?, carry?, dt?) -> Ride?` — the body a character
stands on with the pose it is drawn at now. Hold it after the character is
placed each frame; passing the ride the frame began on (`from`), its
`carry` and the frame's `dt` keeps the ride's trail going on the same body.
- `M.carry(ride, x, y, z, up, dt?) -> Carry?` — how that body moved the point
`(x, y, z)` since the ride was held, and how fast it moves it this frame:
`{ entityId, dx, dy, dz, turn, moved, vx, vy, vz }`, `turn` the body's turn
about `up` as a quaternion, `v` the simulation's velocity for the body at the
point (linear plus spin), or the displacement over `dt` for an entity under
no body. nil with no ride or when its body is gone.
- `M.velocityAt(ride, carry, dt) -> (vx, vy, vz)` — how fast the body moves
the feet: a dynamic body's velocity there this frame, else the velocity
averaged over the ride's trail, this frame's `carry` included. What a character keeps as momentum when it leaves the body.
- `M.steer(vx, vz, walkX, walkZ, lerp, keptX, keptZ) -> (vx, vz)` — air
control for a character carrying the motion it kept from a body it left: the
velocity steers toward that motion plus the walk asked for, so with no walk
asked it goes on moving with the body it left.
- `M.keptPast(keptX, keptZ, vx, vz) -> (keptX, keptZ)` — the part of a kept
motion a wall leaves once it cut the step to the velocity `(vx, vz)`: none
for a wall met head on, the part along a wall slid along.
- `M.drawnRise(hit, up) -> number` — how far along `up` the surface a cast met
stands drawn above the point the cast met it at; `Ground.cast` measures the
ground's distance to the drawn surface with it.
- `M.turned(turn, r) -> Quat` — the rotation `r` turned by `turn` in world
space.
## Usage
```luau
local Platform = require("@builtin::systems.characterController.characterController.physics.platform")
-- each frame, before moving the character
local carry = Platform.carry(ride, px, py, pz, up, dt)
if carry then px, py, pz = px + carry.dx, py + carry.dy, pz + carry.dz end
-- ... walk, cast for ground, place the character ...
ride = if grounded then Platform.hold(groundHit.entityId, ride, carry, dt) else nil
```
▲ 0↑ born
# ground
Ground-probing and slope-math helpers for the character controller.
A downward raycast helper plus two pure vector helpers (slope angle,
plane projection). No state.
## Exports
- `M.cast(x: number, y: number, z: number, skinWidth: number, maxDist: number, selfId: string, riseDist: number?) -> hit?` —
cast a ray downward from `(x, y + riseDist + skinWidth, z)`, reaching
`maxDist` below the feet. The returned hit's `distance` is adjusted to
be relative to the feet, not the ray origin, and is negative for
ground standing above them. The ray passes through the colliders the
body carries (`selfId` and every entity parented under it), so a prop
held at the feet is never the ground.
- `M.slopeAngle(nx: number, ny: number, nz: number) -> number` —
degrees between the supplied normal and world up. Returns 0 on a
zero-length normal.
- `M.projectOnSlope(moveX, moveY, moveZ, normalX, normalY, normalZ) -> (number, number, number)` —
project a movement vector onto the plane perpendicular to a normal:
`v - (v . n) * n`.
## Usage
```luau
local Ground = require("@builtin::systems.characterController.characterController.physics.ground")
local hit = Ground.cast(px, py, pz, 0.01, 0.2, selfId)
if hit then
local angle = Ground.slopeAngle(hit.normal.x, hit.normal.y, hit.normal.z)
if angle <= 45 then
-- walkable
end
end
local px, py, pz = Ground.projectOnSlope(dx, 0, dz, nx, ny, nz)
```
## Notes
- `cast` shifts the origin up by `skinWidth` to avoid starting the ray
inside the ground when the character is sitting on a contact, then
subtracts `skinWidth` back off `hit.distance` so callers see the
true distance from the feet.
- `riseDist` raises the origin further, so the ray also covers ground
that stands above the feet — the ground a walking character climbs
into. A hit up there reports a negative `distance`: how far the
character rises to stand on it.
- `slopeAngle` clamps `cos(angle)` into `[-1, 1]` before `acos` —
callers don't need to normalise the input.
- `projectOnSlope` does not normalise the surface normal; callers
should pass a unit normal (raycast normals already are).
▲ 0↑ born
# luau_introspect (module)
Parses Luau/asset source TEXT into structured declarations. Pure
string/pattern parsing (`string.find` / `string.match` / `string.gmatch`)
over the literal source — no compiling, no VM spawn, no runtime state, no
engine FFI. Given source text, it extracts what is written in the file.
This is the shared parser every per-assetType `M.ref.inspect` hook uses to
turn a component/module/tool's own source into the structured record
`asset.inspect` returns.
## Exports
- `docstrings(src) -> DocMap` — scans `--!desc` / `--!arg` / `--!return` /
`--!example` comment runs and binds each run to the name of the
declaration on the next non-comment line (the identifier after
`function`, `public:`, `local function`, or `M.`).
- `publicFields(src) -> { FieldEntry }` — parses `public = { name =
Field.<kind>(default, mode), ... }` table-literal entries and
module-scope `public.<name> = Field.<kind>(...)` assignments.
- `events(src) -> { EventEntry }` — parses `events = { name =
Event(payloadSchema?, syncMode?), ... }` table-literal entries.
- `methods(src) -> { MethodEntry }` — parses `function public:<name>(...)`
/ `typed function public:<name>(...)` declarations (params + optional
return type).
- `lifecycleHooks(src, catalog) -> { string }` — top-level `function
<name>(` declarations whose name is in the caller-supplied `catalog`
array.
- `moduleExports(src) -> { ExportEntry }` — parses `M.<name> = function`
assignments, `function M.<name>(...)` declarations, and a trailing
`return { foo = foo, ... }` export table.
- `forSource(src, computeFn) -> any` — memoises `computeFn(src)` keyed on
`src` itself in a module-local table. The same source text returns the
cached result without re-running `computeFn`; different source text
recomputes. Keyed on the source content (not an asset checksum) because
composite/container assets (component folders, scene folders, etc.) all
hash to the empty-string checksum — a checksum-keyed cache collapses
every such asset's detail onto whichever one was inspected first.
## Usage
```luau
local Introspect = require("modules.luau_introspect")
local src = self:getInitScript()
local detail = Introspect.forSource(src, function(s)
return {
fields = Introspect.publicFields(s),
events = Introspect.events(s),
methods = Introspect.methods(s),
hooks = Introspect.lifecycleHooks(s, lifecycleCatalog),
}
end)
```
## Notes
- Every function is a pure string→table transform: same source text in,
same structured table out, every time. No reads of live component
state, no entity/world queries.
- Structural scanning runs over a comment- and string-aware **mask** of
the source (a same-length copy where comment bodies and string-literal
contents are blanked to spaces, delimiters and newlines preserved).
Pattern matches and brace/paren balancing run on the mask — so a brace,
`Field.`, `Event(`, or a whole entry that appears inside a comment or a
string literal never registers — while captured values are sliced from
the original source at the same (aligned) indices. This makes the
parser robust to apostrophes in comments, commented-out entries, string
defaults containing `}` / `Field.` / `Event(`, and `[[ ]]` long
strings.
- `default` / `category` are raw trimmed source-text slices (with any
trailing comment stripped), not evaluated values.
- For a **ref constructor** (`Field.assetRef` / `dataRef` / `resource`
/ `componentRef`) the FIRST positional argument is the category /
contract / componentType selector, captured under `category`; the
SECOND argument is captured under `default`.
- For every **other** Field kind the first argument is the `default`
and `category` is nil.
- A trailing `Sync` / `NoSync` identifier is captured as `sync`,
tolerating a trailing comma or a trailing comment after the last
argument.
- Field/Event entries whose key is a computed or indirect expression
(`[expr] = Field.number(...)`) are omitted — only literal identifier
keys are recognised.
- `methods` captures a `...` variadic parameter (as `name = "..."`), with
its `: <type>` annotation when present.
- A `--!desc` written above a field/event declaration (`<name> =
Field.<kind>(...)` / `<name> = Event(...)`) or a `public.<name> =`
assignment binds to that name in `docstrings`, and is folded into the
corresponding `publicFields` / `events` entry's `desc`.
- `lifecycleHooks` never hardcodes the lifecycle-callback catalog; the
caller passes the list of names to match against.
- `forSource`'s memo is bounded (oldest-key eviction) so a long session
touching many distinct asset versions can't grow it without limit.
▲ 0↑ born
# assetType.shared.ref
Builds the metatable every `AssetRef` (the `{ __ref, type, name, guid, identity, path }` envelope returned by `asset.resolve` / `asset.ref`) carries. Replaces the per-call C metatable that used to live in `crates/zero_scripting/src/ffi/bindings/asset.rs::attach_asset_ref_metatable`.
## Public API
```lua
local assetRef = require("@builtin::assetTypes.assetType.shared.ref")
-- Called by the Rust factory (push_asset_ref_handle) via
-- _G.__build_asset_ref_proxy after the envelope fields are set.
assetRef.build(envelope) -- attaches AssetRefMT, returns the table
```
The module exposes no invalidation surface — discovery is registry-driven and hot-reload is transparent (see "Discovery and hot-reload" below).
## Method dispatch order
`ref.foo` is resolved in this order:
1. **Default methods** — `getSource` / `getBytes` / `getText` / `exists` / `inspect` and the lazy `meta` property. Per-type definitions cannot override these (engine contract from gh#1889).
2. **Per-type `ref` table** — discovered through `asset.resolve(<typename>, "assetType")` + `require(<identity>.behavior)`. The lookup resolves to whichever `<typename>.assetType/` folder is currently registered for the typename (built-in, user, or library-vendored) and pulls its `ref` methods.
3. **Nil** — unknown key, same shape as the original C metatable.
## Adding methods for a new asset type
Drop a `behavior.luau` into the type folder:
```
src/lua/lib/assetTypes/<typename>.assetType/
├── type.yaml -- structural spec (existing)
├── behavior.luau -- ref + global behaviour (new)
└── template/ -- placeholder body (existing)
```
`behavior.luau` returns:
```lua
return {
ref = {
--!desc Per-instance method on every `<typename>` AssetRef.
myMethod = function(self, ...) ... end,
},
global = {
-- Reserved for the asset.<typename>.* surface — not consumed
-- yet; included so the contract from gh#1889 lands cleanly.
},
}
```
Within `ref` methods, `self` is the AssetRef envelope: `self.path`, `self.identity`, `self.guid`, `self.type`, `self.name` are available. Engine-required fields (`guid`, `path`, `identity`, `type`) must not be redefined.
## Discovery and hot-reload
Type discovery uses the asset registry, so it doesn't matter where a `<typename>.assetType/` folder lives — engine built-ins under `@builtin::assetTypes.<X>`, user types dropped under `/zero/source/<X>.assetType/`, or types vendored inside an imported library all resolve identically. The dispatcher walks `asset.resolve(<typename>, "assetType")` → canonical identity → `require <identity>.behavior` on every miss; the asset registry is the cache for the resolve half and Luau's `_LOADED` is the cache for the require half.
Hot-reload is transparent. When a `<typename>.assetType/behavior.luau` is rewritten through VFS, the engine's `invalidate_require_cache_for_state` re-runs the module and mutates the cached `_LOADED[<identity>.behavior]` table in place. Dispatch reads `mod.ref` on every access (rather than caching a sub-pointer), so existing AssetRefs see the new methods on the very next access — no Rust-side hook into this module is needed, and no invalidation API is exposed for callers to call.
The same registry-driven path also handles type **registration** correctness: dropping a new `<typename>.assetType/behavior.luau` updates the asset registry, the next `asset.resolve(<typename>, "assetType")` returns the new ref, and AssetRefs of that type immediately gain the new methods.
## Why Luau, not Rust
The asset surface needed per-category behaviour (`material:getProperties()`, `bundle:instantiate(entityId)`, `tool:run(args)`) and the old shape couldn't grow without an FFI change per method. Owning the proxy in Luau means:
- Type-specific methods ship as content (the `<typename>.assetType/` folder), not engine code.
- Adding a new asset type drops in a new folder; no Rust rebuild.
- Methods can call any other Luau global (`vfs`, `asset`, `Material`, `entity`, etc.) directly, instead of going through narrow FFI primitives.
## Consumers
- `crates/zero_scripting/src/ffi/bindings/asset.rs::attach_asset_ref_metatable` — the Rust factory that pushes envelopes invokes `_G.__build_asset_ref_proxy` once per push.
- Every Luau call site of `asset.resolve` / `asset.ref` / `entity(id).component.X.material` / any binding declared `AssetRef<...>` — they all receive envelopes built through this module.
▲ 0↑ born
# yaml.module
YAML decode + encode for authored engine content. Pure Luau, no engine
dependencies — a general parsing library, not data-system plumbing.
```luau
local Yaml = require("@builtin::modules.yaml")
local doc = Yaml.decode(vfs.read(path))
vfs.write(path, Yaml.encode(doc))
```
## Supported subset
- Block mappings (`key: value`) and block sequences (`- item`), nested
to any depth.
- Compact sequence-of-mapping entries (`- path: x` / ` kind: y`).
- Flow collections — `{ a: 1, b: 2 }` and `[1, 2, 3]` — single line.
- Plain scalars with type inference: `~` / `null` → nil, `true` /
`false` → boolean, numeric literals → number, everything else →
string.
- Single- and double-quoted strings (`''` escapes a literal quote
inside a single-quoted string; `\n` `\t` `\r` `\\` `\"` inside a
double-quoted one). A quote opens a quoted scalar where a scalar
begins — after `key:`, after a `- ` entry marker, or inside a flow
collection — so a plain scalar carries an apostrophe as data
(`note: the world's rules`). Quoted keys are read in flow mappings.
- `#` comments — honored outside quotes, so a `#` inside a quoted
string is kept as data.
- Literal (`|`) and folded (`>`) block scalars, with a chomping
indicator (`-` strips the final newline, `+` keeps every trailing
blank line, none keeps one newline) and an indentation indicator
(`1`-`9`: the content's indent past the parent's), in either order
(`|-`, `>+`, `|2`, `>1-`). A block scalar's content is literal text:
quotes (balanced or not), `#`, `key: value` and `---` inside it are
data.
- An optional leading `---` document marker.
## Loud-error contract
Constructs outside the subset above raise instead of misparsing:
anchors/aliases (`&`, `*`), tags (`!`), directives (`%`),
multi-document streams (a second `---`), a block-scalar header
it cannot read (`|x`, `|-+`, `|0`), tab indentation, and inconsistent indentation (both block structure and
block-scalar bodies). Every error carries the offending line number
(`yaml: line N: ...`), so a bad config points straight at the line to
fix.
Tab indentation is rejected everywhere — including block-scalar body
lines whose leading whitespace contains a tab. A tab after the first
non-space character of a line is content and passes through.
## API
- `Yaml.decode(text: string): any` — decode a YAML document into a
Luau value (table, scalar, or nil for an empty document). Raises on
malformed input or an unsupported construct.
- `Yaml.decodeWithComments(text: string): (any, boolean)` — decode as
`decode` does, and report whether the text carries a comment by the
decoder's own rule: a `#` at a line's start or after whitespace, outside
a quoted scalar and outside a block scalar. Re-encoding the value drops
such comments, so an editor that writes a document back reads this first.
- `Yaml.encode(value: table): string` — encode a Luau table as YAML
(block style, two-space indent, alphabetically sorted keys). Raises
on values YAML can't represent (functions, userdata, non-string
mapping keys).
A top-level empty table encodes to an empty document, which decodes
back to `nil` (the YAML empty-document ambiguity).
▲ 0↑ born
# json
JSON encode/decode library for Luau. Encodes Lua values to JSON
strings and decodes JSON strings back to Lua values. Used for
communication with the Rust side of the engine, the VFS read/write
bridge, and any wire-format that needs JSON.
Pure Luau, no engine dependencies. Compact and pretty-printed
encoders, plus a hand-rolled decoder that streams the input by position
so it works under WASM as well as native.
## Exports
- `Json.encode(value: any, indent?: string, currentIndent?: string) -> string` — compact encode. Functions / unknown types and NaN/Inf encode as `null`.
- `Json.encodePretty(value: any, indentStr?: string) -> string` — pretty-printed encode with sorted object keys (diff-friendly).
- `Json.encodeArgs(...: any) -> string` — encode varargs as a JSON array.
- `Json.decode(str: string) -> any` — decode a JSON string. Returns the decoded value, or `nil` + error message on failure.
## Usage
```luau
local Json = require("@builtin::modules.json")
local widget = { type = "button", text = "Click Me" }
local compact = Json.encode(widget) -- '{"text":"Click Me","type":"button"}'
local pretty = Json.encodePretty(widget, " ")
local decoded = Json.decode(compact)
local v, err = Json.decode("oops") -- v = nil, err = error message
```
## Notes
- Object keys are sorted alphabetically in both encoders for consistent
output across runs.
- Numeric keys on objects are stringified at encode time (JSON has no
numeric keys). Pure-integer key sets get detected as arrays via
`isArray` and encoded with brackets.
- NaN, +Inf, -Inf encode as `null` — JSON has no representation. Round
trips through `decode` recover `null` (Lua `nil`), so they don't
preserve.
- Unicode `\uXXXX` escapes decode to UTF-8 by hand to stay WASM-safe.
Only the BMP is covered; supplementary planes via surrogate pairs
are not.
- Functions encode as `null`.
- Decode is character-streamed — no regex, no `string.match` patterns
on the whole input — so the line-and-column information needs to be
reconstructed from the position offset.
▲ 0↑ born
# assetType runtime
The machinery that reads a `<typename>.assetType/behavior.luau` and turns its
declarations into live behaviour.
A `behavior.luau` is a table of declarations — `ref` methods, `modules` shared
code, an `events` schema, a `namePattern`, `refShapes`, and the `onCreate` /
`onRegister` / `onChange` / `onDelete` / `validate` / `settingsDefaults` /
`settingsCorrections` hooks. None of it runs itself. This is the code that
runs it, and it lives here because reading a type's declarations is the
**assetType type's own behaviour** — the same way `material.assetType` owns
what a `.material` does.
## Sub-modules
| Module | Reads | Responsibility |
|---|---|---|
| `ref.module` | `ref`, `modules` | Builds every `AssetRef` envelope, attaches the shared metatable, and dispatches per-type methods and shared modules onto it. Also owns edit-mode write-behind persistence. |
| `create.module` | `onCreate`, `namePattern`, `validate` | Backs `asset.create`: resolves the type, checks the name against its pattern, runs `onCreate` (or clones `template/`), and writes the instance. `validate.module` beside it checks a creation `opts` table against the type's `createSchema`. Before running `onCreate`, resolves the type's settings chain (below) and hands the result to the hook as `opts.settings`. |
| `settings.module` | `settings`, `settingsDefaults`, `settingsCorrections` | A type's declared settings schema and where its values live (`type.yaml`'s `settings:` block). `Settings.resolveForCreate` layers the schema's own defaults, the type's own `settingsDefaults(name, opts, asked)` hook (a DEFAULT the schema can't express — a name-derived convention, a fact read off a payload the caller handed it, a value following a field `asked` shows a higher layer naming; any later layer overrides it), the Preset Manager, an importer's settings, the caller's `settings` table, then the type's own `settingsCorrections(values, name, opts)` hook (a CROSS-FIELD CONSTRAINT the schema can't express, applied last over the fully merged values). A correction over a default/preset/importer value lands silently; a correction that would override what the caller's own `settings` table explicitly asked for refuses the creation instead, naming the field and why. Neither hook is ever handed a table to mutate; each returns what it wants changed (`settingsCorrections` may also return a `{ [field]: reason }` table for that refusal message). `Settings.cloneValues` deep-copies a values table — `create.module` hands `onCreate` a copy, never the table it stamps. `Settings.valuesOf` / `writeValues` read and write an asset's own values file. |
| `typeYaml.module` | `type.yaml` | The folder a type lives in and its parsed `type.yaml`, decoded once per content version of the file. `settings.module` and `inspector.module` read their blocks through it. `about` / `aboutAt` read a type's `about.yaml` (`intent`, `function`, `usage`), leaving out any key that is empty or still starts with `[[describe]]`; `aboutRows` and `aboutMarkdown` lay the texts out for the Inspector and the `types/<name>` guide. |
| `inspector.module` | `type.yaml`'s `inspector:` block | Which inspector a type declares for its assets (`inspector: { type: ... }` or `{ instance: ... }`), and the declaration that file returns — the sections it adds, the generic ones it replaces, and their order — or the problem that kept it from loading. |
| `onRegister.module` | `onRegister` | Fires an instance's once-only registration hook — on arrival, on world load, and for `@builtin` library instances. |
| `changeDispatch.module` | `onChange`, `onDelete`, `refShapes` | Routes a VFS source write or a folder delete to the enclosing typed asset's type hooks. |
| `refShapes.module` | `refShapes`, `ref` | Publishes what every `AssetRef<category>` answers to, so a member read on an asset-typed value is checked against that category's real surface. |
| `events.module` | `events` | The per-asset event runtime behind `ref.events`. |
| `instantiable.module` | `ref.instantiate` | The instantiation contract an asset type opts into: `root` stands the root entity, `place` applies the base placement opts to one the type adopted, and `result` shapes the `(root, idMap)` every `instantiate` returns. Also registers the `sceneInstantiable` field-constraint validator. |
| `declaration.module` | `type.yaml` | The type's decoded declaration, read once and held until a write inside an `.assetType` folder; what every question about a type as a whole reads. |
| `previewRecipe.module` | `type.yaml` `preview:` | How an instance's `preview.png` is produced: which of the four recipes (`instantiate`, `image`, `surface`, `custom`) the type declares, and what that recipe needs. |
## Reaching it
```luau
local rt = require("@builtin::assetTypes.assetType.shared")
rt.ref.loadTypeBehavior("material")
```
Fields resolve lazily. The prelude requires the sub-modules directly, in
dependency order (`ref`, then `changeDispatch`, `onRegister.install()`,
`refShapes.install()`) — a table that required all six on load would take that
ordering away from it.
▲ 0↑ born
backing path · systems/characterController.package/characterController.module/movement.module
Problems
Everything affecting this asset right now: its own problems, anything wrong inside it, and problems on its direct dependencies.
0problems
No problems reported on this asset or on the parts this page shows. Parts it leaves out are not counted here.
⌬ZeroMind agent review · awaiting first pass
Findings
Reviewer findings (handle · model · tag · quoted note) appear here once the per-pass review log lands. Today only the rolled-up
agent_score is exposed.usability—
did it work as advertised
quality—
authoring polish + cohesion
performance—
frame & memory budget held
agent review score
—
/ 100
awaiting first pass
usability × 0.40
+ quality × 0.35
+ performance × 0.25
± compat factor
+ quality × 0.35
+ performance × 0.25
± compat factor
Usability ratings
Did the part work as advertised when consumers tried to drop it in. Separate from upvotes: those are taste; this is "did it function".
—%no reports yet
Sign in to report whether this part worked for you.
Discussion
Scoped to this part · feeds back into the world's score.
0comments
Sign in to post.sign in
No comments yet. Be the first.