Style Cookbook: Mix Your Own Art Style from Stackable Look Blocks
README.md
lookbookShowcaseKit
Adds a showcase stop to the Lookbook: a small set built from published kits (masonry, toon, retro, weathering, glass and water, particles, a health bar over a skinned character, a menu screen and a kit sky) and a 7 second orbit around it after the Lookbook's core path, so a style stack is judged on mixed materials, transparency, particles, world UI and screen UI at once.
Version 1.0.52. Depends on lookbookKit 1.0.53 and the published kits listed below.
Install and use
Installs with several dependencies can be slow (#21420), so give an install time to finish and check /zero/source for the package folder. Install lookbookShowcaseKit beside lookbookKit, and install the kits listed below from ZeroMind (each as its own install; a fresh install of each brings its own dependencies). Then, in the scene that holds the Lookbook (inside content() of its build.luau), or from the console:
local ShowcaseStop = require("~lookbookShowcaseKit.ShowcaseStop")
ShowcaseStop.build({ 420, 0, 0 }, { sky = false }) -- the set, 90 m past the last core stop
ShowcaseStop.register() -- the 7 s orbit, after the core path
build(origin?, opts?)spawns the set under one root (LookbookShowcaseSet) facing +Z, after removing the set it built before, so it is safe to run again.opts.sky = falseleaves out the sky clock,opts.menu = falseleaves out the menu screen,opts.hoursets the hour the clock holds (default 16.5).register(origin?)adds theshowcasestop withLookbookPath.extend;unregister()takes it off.clear()removes the set.- Open the
LookbookShowcasescene (lookbookShowcaseKit.LookbookShowcase) to see the set alone at the origin, with the normal player (humanoid body, orbiting follow camera, a spawn facing the set), a sun and an ambient light, and an empty sharedStyleStackto stack looks on.
In the Lookbook pass { sky = false }: the sky clock is one per scene and drives the scene's sun and ambient light, which the Lookbook animates itself (the rotating sun and the every-light-off moment). In LookbookShowcase the clock runs with the defaults.
What it holds
| Asset | What it does |
|---|---|
ShowcaseStop (module) | build, clear, register, unregister. |
ShowcaseEmitter (component) | Replays a juiceKit effect preset on an interval, in edit and in play. |
ShowcaseMenu (component) | Shows a menusKit screen; in edit it draws the kit's screen tree itself, without the full-screen backdrop. |
ShowcasePreview (component) | Steps and draws barsKit's bars in edit mode, where the game clock is held. |
ShowcaseIdle (component) | Loops an idle clip on the humanoid with a one-clip AnimGraph. |
LookbookShowcase (scene) | The set alone, with the normal player setup and an empty style stack. |
Kits and assets used
Every kit was installed fresh from ZeroMind into this world as its own install.
| Kit (install name) | Version | Asset guid | World guid | Installed at | What the set uses |
|---|---|---|---|---|---|
| masonryMaterials (Brick and Mortar) | 2.0.0 | c93d1342-55ce-48e4-b8b8-65078a38840e | 202c4393-4736-470d-b686-b9a6142d2a7a | /source/masonryMaterials.package | pavingSlabs floor, brickRunning back wall, brickFlemish piers, concreteSmooth wall cap and glass foot, concreteStained basin rim, pavingBrickHerringbone step |
| toonMaterials (Ink and Gouache) | 1.0.4 | aafbaae5-5d94-4661-b8d4-688eeed11d1b | f17aab57-41f4-46b7-b5f5-7a0ec0ea7e6c | /source/toonMaterials.package | toonBrick cottage walls, paintedRoofTiles roof, toonPlanks door, toonStone chimney, toonWood window frame; the ToonProp component (ink outline, world-scale mapping) |
| retroMaterials (Pixel and Scanline) | 1.0.2 | 3af3436c-590e-4549-a0d9-b1880c237aeb | b883de81-1a46-4792-9bbe-61cddc185468 | /source/retroMaterials.package | retroPlanks16 crates, voxelOre block, crtTelevision panel, ps1Concrete stand |
| weatheringMaterials (Wear and Tear) | 1.0.11 | cb4ddc77-61d5-4420-9e6b-c3c560cf8d92 | 5e63a079-af91-4d33-8af2-30aa60071a36 | /source/weatheringMaterials.package | the Weathered component with overlays mossCreep and creviceGrime (wall), risingDamp (piers), toonDirtPatches (cottage), sootStains (chimney), dirtFilm and scratches (crate), settledDust (CRT), waterStains (basin rim) |
| glassLiquidsMaterials (Looking Glass) | 1.0.5 | d98f6085-4434-488c-a864-f28762580a72 | 5ea0a517-cfec-4772-9ff6-6e6d73f8bb3f | /source/glassLiquidsMaterials.package | glassClear window pane and bottle, glassTintedGreen standing panel, waterStill basin water, honey in the bottle |
| materialLibraryKit (Swatchbook, brought by the four collections) | 1.3.1 | 0d7f3e76-0699-44fd-b0ac-2cb37822b648 | a8c1db81-44f9-4da4-a9a5-4dc8095cdd7f | /source/deps/a8c1db81-44f9-4da4-a9a5-4dc8095cdd7f/materialLibraryKit.package | Materials.get(id).material to fetch every material above by name |
| juiceKit (Juicebox) | 1.2.2 | eed55f6d-afaf-4767-83c5-539ef91e0dc5 | 46548c0c-2e82-486f-8dc1-d05797c98aaf | /source/juiceKit.package | Juice.play with vfxSparks (over the CRT, every 0.9 s) and vfxSmoke (chimney, every 1.6 s), realistic look |
| barsKit (Gaugeworks) | 1.3.0 | c154eb07-ce7c-48ca-8232-4ce1a8754214 | d9f6c7f4-b6e3-4865-958f-8b9ed971056d | /source/barsKit.package | the Bar component, look stacked (shield on health), world placement over the character; the hud module for the edit-mode preview |
| SecondWind (Second Wind, brought by barsKit) | 1.2.0 | 5da0a53c-5953-4adc-80fb-f5afb02f6568 | 7a497fbf-1b4e-4655-8abf-e588fa7caa5c | /source/deps/7a497fbf-1b4e-4655-8abf-e588fa7caa5c/SecondWind.package | the Vitals component on the character: shield model, 100 health, 60 shield, invulnerable |
| menusKit (Press Start Studio) | 1.3.1 | 61aaf7c0-6b6e-4451-9141-a5ef7a087272 | 37a0d1f9-9896-4626-b140-43fea7fbedeb | /source/menusKit.package | the title screen in the cozy look and rail layout (Menus.setup, Menus.show, Menus.build) |
| worldClockKit (Skyclock) | 1.4.0 | da911599-3bdf-4c1e-a4c3-ce13364692bf | a77932ae-c366-4a6a-9fa4-2984fcad8efa | /source/worldClockKit.package | one WorldClock (realistic sky, clear weather, paused at 16:30, sound off) |
| Engine humanoid | builtin | - | - | @builtin::avatars.humanoid | the skinned character, idling on A_Idle_Standing_Masc from the engine's character controller |
The example stack over these kits
What the styleKit README's first example (posterize, duotone at 0.5, depth line, sketch line at 0.6) does to this set, measured on presented frames of the stop with and without the stack:
- Reads well. The brick wall and piers take light pencil lines along their mortar (the depth line's crease pass follows the normals), which suits brick. The humanoid gets a crisp silhouette. The menu screen and the health bar are drawn after the stack and come out unchanged.
- Double outlines on the toon cottage. The toon collection draws its own ink hull (ToonProp), and the depth line draws a second, thinner line along the same roof eaves and corners. One owner per edge: put the toon props in a mask group and give the Line block
mask = { kind = "group", group = 1, invert = true }, or switch the kit's outline off. - Fighting palettes. Duotone at half strength pulls the kits' own colours toward its two inks: chroma drops from 6.2 to 3.8 on the toon brick, from 5.3 to 2.8 on the green glass and from 6.3 to 4.8 on the CRT screen. Over painted kits, leave the Colour slot empty or limit it with a group mask.
- Particles. The smoke puffs pick up a faint sketch ring, since the sketch line reacts to colour edges and smoke has no depth.
- Smudges on flat masonry. The paving slabs and the concrete basin rim carry stains in their textures, and the sketch line's crease pass draws them as dark smudges. Lower the sketch line's
crease, or mask it to the characters, where a clean floor matters. - World UI. The health bar is a screen drawn after the stack, placed over the character's head, so the stack never touches it and its green and blue stay exact.
- Kit behaviour, not the stack: the menu kit's full backdrop dims the whole set while its title screen shows in play, and the weathering kit's moss and grime overlays on the back wall do not show in edit.
Seeing the health bar and the menu in the editor
The health bar and the menu are screens drawn into a scene camera's picture. The editor's fly camera is not a scene camera, so in the editor view neither shows. To see them while authoring, look through the scene's player camera:
local ShowcaseStop = require("~lookbookShowcaseKit.ShowcaseStop")
ShowcaseStop.preview() -- look through the player camera: the menu and the health bar show
ShowcaseStop.preview(false) -- back to the editor's fly camera
In play both show without any of this.
Why masonry now, and stone before. Versions up to 1.0.3 built the floor and walls from stoneMaterials (Bedrock), a stone collection that was installed in place of the masonry kit you asked for, without saying so. That was a mistake: the masonry collection exists (masonryMaterials 2.0.0) and is what this stop is meant to show. From 1.0.4 the set uses masonry only, stoneMaterials is no longer a dependency and has been removed from this world, and every material is named with its collection (masonry/brickRunning, toon/toonBrick), because the masonry kit also ships a toonBrick and a bare name would pick whichever collection registered last.
Known limits
- The health bar and the shield are play-mode features. SecondWind's
Vitalsticks only in play, so in edit the character reads full health and no shield (the bar shows health alone); in play the shield fills. barsKit'sBaronly draws in play;ShowcasePreviewdraws it in edit by stepping the kit's bars on the real clock. World bars are placed with the engine'sworldToScreen, so an offscreen capture from a camera of its own does not place the bar over the head. - The menu covers the set in play. In play menusKit's own host draws the title screen with its full-screen backdrop and holds the player's input until Play is picked. The edit drawing (what the Lookbook sees while authoring) leaves the backdrop out by removing the node whose id ends in
_bgfrom the kit's tree; a change to that tree in menusKit would bring the backdrop back. - Wall moss and crevice grime did not show in edit-mode captures although both shells were built with their overlay materials; the cottage's cartoon dirt, the crate's dirt and the dust show. In edit the
Weatheredcomponent's task waits while gameplay is paused. - The sky clock owns the scene's lights. One
WorldClockper scene; it drives the scene's sun and ambient light, which is why the Lookbook should build the set with{ sky = false }. - Offscreen captures do not draw the style stack (styleKit runs after post); judge looks on the stop from presented frames.
- The particles are juiceKit bursts replayed on a timer, so they come in pulses rather than as a steady stream.
- Other engine issues that apply here: a two-client editor sometimes refuses to load two different scenes at once (#24666, #24667); a world boot can wait about 30 s on a network handshake before content starts (#24669); installs with several dependencies are slow (#21420); the ZeroMind description can lag one release (#19258); the web build was not checked from here (#20946).
Version history
1.0.51 (2026-11-12): pins lookbookKit 1.0.52, styleKit 1.7.8 (styleKit 1.7.8 logs no second refusal for the old roles field on a scene saved before styleKit 1.5). Nothing else changed.
1.0.50 (2026-11-12): pins lookbookKit 1.0.51 (styleKit 1.7.7: a role set or look another player changes reaches everyone in the session). Nothing else changed.
1.0.49 (2026-11-12): pins lookbookKit 1.0.50 (styleKit 1.7.6: an ink set by hand on one object reads as set, and a set for a kind of game carries its groups before a look is picked). Nothing else changed.
1.0.48 (2026-11-12): pins lookbookKit 1.0.49 (styleKit 1.7.5: its checks pass where styleKit is installed alone). Nothing else changed.
1.0.47 (2026-11-12): pins lookbookKit 1.0.48 (styleKit 1.7.4: installs on its own into an empty world again). Nothing else changed.
1.0.46 (2026-11-12): pins lookbookKit 1.0.47 (styleKit 1.7.3: a role reaches what a kit draws in an object's place (pickupsKit's coins), and looks installed after the first scan are found). Nothing else changed.
1.0.45 (2026-11-12): pins lookbookKit 1.0.46 (styleKit 1.7.0: role sets' glazes tell groups sharing a material apart, things with no role keep the plain line under a toon look, a look switched on never flashes black while its shaders compile). Nothing else changed.
1.0.44 (2026-11-11): pins lookbookKit 1.0.45 (lookbookKit 1.0.45 brings its Lookbook scene with it when it is installed as another package's dependency, so the toonBlocks, inkBlocks and paperBlocks unlit-frame tests and zero lookbook run in an installed world). Nothing else changed.
1.0.43 (2026-11-11): pins lookbookKit 1.0.44 (styleKit 1.6.5 draws a newly switched-on look's settled picture from its first frames instead of a lighter, half-set one for two to four seconds; lookbookKit 1.0.44 finds its Lookbook scene where it is installed). Nothing else changed.
1.0.42 (2026-11-11): pins lookbookKit 1.0.43 (styleKit 1.6.4 puts a role given to a player template on the body every joining player is copied from and rebuilds the role mask at most four times a second, and toonBlocks 1.3.6 starts its toon ink by itself and draws every role ink through one shared flood). Every README in the package (each block, look, shader and guide) now ends with a Known limits section naming the engine issues that apply there.
1.0.41 (2026-11-11): pins lookbookKit 1.0.42 (styleKit 1.6.2 finds the scene's stack again when the one it held was removed (after a play restart a look or role set change failed with "the component this proxy names was removed")). Nothing else changed.
1.0.40 (2026-11-11): pins lookbookKit 1.0.41. Nothing else changed.
1.0.39 (2026-11-11): pins lookbookKit 1.0.40 (styleKit 1.5.1 keeps the scene's role set working in an editor that had an older styleKit open). Nothing else changed.
1.0.38 (2026-11-11): pins lookbookKit 1.0.39. Nothing else changed.
1.0.34 (2026-11-08): moves to the engine's current built-in library (@builtin e89b9db), whose update rewrote small reference files inside the package (a world on an older built-in library is hidden from players). Pins lookbookKit 1.0.35. Nothing else changed.
1.0.33 (2026-11-08): moves to the engine's current built-in library (@builtin edb50c2), whose update rewrote small reference files inside the package (a world on an older built-in library is hidden from players). Pins lookbookKit 1.0.34. Nothing else changed.
1.0.32 (2026-11-08): pins toonMaterials 1.0.11 (was 1.0.4), built on materialLibraryKit 1.4.3 and the current engine library. Nothing else changed.
1.0.31 (2026-11-08): moves to the engine's current built-in library (@builtin f4425a5), whose update rewrote small reference files inside the package (a world on an older built-in library is hidden from players). Pins lookbookKit 1.0.33. Nothing else changed.
1.0.30 (2026-11-08): moves to the engine's current built-in library (@builtin f39f044), whose update rewrote small reference files inside the package (a world on an older built-in library is hidden from players). Pins lookbookKit 1.0.32. Nothing else changed.
1.0.29 (2026-11-08): pins lookbookKit 1.0.31; the package's description now reads as a store listing (what you get and how to start), without a version number or a list of changes.
1.0.28 (2026-11-08): pins lookbookKit 1.0.30. Nothing else changed.
1.0.27 (2026-11-08): pins lookbookKit 1.0.29. Nothing else changed.
1.0.26 (2026-11-08): moves to the engine's current built-in library (@builtin f110cb3), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.28. Nothing else changed.
1.0.25 (2026-11-08): moves to the engine's current built-in library (@builtin a29b227), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.27. Nothing else changed.
1.0.24 (2026-11-08): moves to the engine's current built-in library (@builtin c61f473), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.26. Nothing else changed.
1.0.23 (2026-11-07): moves to the engine's current built-in library (@builtin 7ca1f19), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.25. Nothing else changed.
1.0.22 (2026-11-07): keeps its pins with the Cookbook's other packages, which moved to the engine's current built-in library (@builtin fdc9a99). Pins lookbookKit 1.0.24. Nothing else changed.
1.0.21 (2026-11-07): moves to the engine's current built-in library (@builtin 7e13a48), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.23. Nothing else changed.
1.0.20 (2026-11-07): moves to the engine's current built-in library (@builtin 2809239), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.22. Nothing else changed.
1.0.19 (2026-11-07): pins lookbookKit 1.0.21. No change to the stop.
1.0.18 (2026-11-07): moves to the engine's current built-in library (@builtin 278f02f), whose update rewrote small reference files inside the package. No block, look or shader changed. Pins lookbookKit 1.0.20.
1.0.17 (2026-11-07): moves to the engine's current built-in library (@builtin 6656162), whose update rewrote small reference files inside the package. No block, look or shader changed. Pins lookbookKit 1.0.19.
1.0.16 (2026-11-07): moves to the engine's current built-in library (@builtin 808b4a1), whose update rewrote small reference files inside the package. Pins lookbookKit 1.0.18. No block, look or shader changed.
1.0.15 (2026-11-07): depends on lookbookKit 1.0.17; no change to the stop.
1.0.14 (2026-11-07): depends on lookbookKit 1.0.16; no change to the stop.
1.0.13 (2026-11-03): depends on lookbookKit 1.0.15; no change to the stop.
1.0.12 (2026-11-02): needs lookbookKit 1.0.14 (runs that finish on their own); nothing in the stage changed.
1.0.11 (2026-11-02): needs lookbookKit 1.0.13; nothing in the stage changed.
1.0.10 (2026-11-02): needs lookbookKit 1.0.12 (which needs styleKit 1.2.3); nothing in the stage changed.
1.0.9 (2026-11-01): built on lookbookKit 1.0.11 (runs state their view size and refuse one whose view changed size).
1.0.8 (2026-11-01): documentation only: install notes describe how installing works (install from ZeroMind search; installs with several dependencies can be slow) without naming internal ticket numbers.
1.0.7 (2026-11-01): documentation only: the install note says how installing works today (install from ZeroMind search; installs with several dependencies can be slow).
1.0.6 (2026-10-31): store listing rewritten for creators; built on lookbookKit 1.0.5.
1.0.5 (2026-10-31): built on lookbookKit 1.0.4.
1.0.4 (2026-10-31): the set is built from the masonry collection (masonryMaterials 2.0.0) as asked, in place of stoneMaterials, which is removed; every material is named with its collection; ShowcaseStop.preview() shows the health bar and the menu in the editor; findings redone on the masonry.
1.0.3 (2026-10-31): the LookbookShowcase scene is built and saved (it held only a placeholder before).
1.0.2 (2026-10-31): the LookbookShowcase scene file loads standalone.
1.0.1 (2026-10-31): findings for the example stack over the kits; depends on lookbookKit 1.0.1.
1.0.0 (2026-10-31): first release.